CH ORF (R4)
3.0.0-ballot - ballot Switzerland flag

This page is part of the CH ORF (R4) (v3.0.0-ballot: STU 3 Ballot 1) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version. For a full list of available versions, see the Directory of published versions

Resource Profile: ChOrfRequestedEncounter - Detailed Descriptions

Active as of 2024-05-17

Definitions for the ch-orf-encounter resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Encounter
ShortCH ORF Requested Encounter
2. Encounter.extension
SlicingThis element introduces a set of slices on Encounter.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 4. Encounter.extension:desiredAccomodation
    Slice NamedesiredAccomodation
    Control0..1
    TypeExtension(CH ORF Desired Accommodation) (Extension Type: Coding)
    Must Supporttrue
    6. Encounter.status
    Must Supporttrue
    8. Encounter.class
    ShortAMB | IMP | EMER
    BindingThe codes SHALL be taken from Encounter Class
    (required to http://fhir.ch/ig/ch-orf/ValueSet/ch-orf-vs-encounterclass)
    Must Supporttrue
    10. Encounter.subject
    Must Supporttrue

    Guidance on how to interpret the contents of this table can be found here

    0. Encounter
    Definition

    This is basic constraint on Encounter for use in CH Core resources.


    An interaction between a patient and healthcare provider(s) for the purpose of providing healthcare service(s) or assessing the health status of a patient.

    ShortCH ORF Requested EncounterAn interaction during which services are provided to the patient
    Control0..*
    Is Modifierfalse
    Summaryfalse
    Alternate NamesVisit
    Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
    dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
    dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
    dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
    dom-6: A resource should have narrative for robust management (text.`div`.exists())
    2. Encounter.implicitRules
    Definition

    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

    ShortA set of rules under which this content was created
    Comments

    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

    Control0..1
    Typeuri
    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    4. Encounter.extension
    Definition

    An Extension


    May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortExtensionAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on Encounter.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 6. Encounter.extension:desiredAccomodation
      Slice NamedesiredAccomodation
      Definition

      Desired Accommodation during the Requested Encounter.

      ShortCH ORF Desired Accommodation
      Control0..1
      This element is affected by the following invariants: ele-1
      TypeExtension(CH ORF Desired Accommodation) (Extension Type: Coding)
      Is Modifierfalse
      Must Supporttrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      8. Encounter.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
      Summaryfalse
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      10. Encounter.identifier
      Definition

      Identifier(s) by which this encounter is known.

      ShortIdentifier(s) by which this encounter is known
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..*
      TypeIdentifier
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on Encounter.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • pattern @ $this
      • 12. Encounter.identifier:VisitNumber
        Slice NameVisitNumber
        Definition

        Identifier(s) by which this encounter is known.

        ShortVisit number (Fallnummer)Identifier(s) by which this encounter is known
        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..*
        TypeIdentifier
        Is Modifierfalse
        Summarytrue
        Pattern Value{
          "type" : {
            "coding" : [{
              "system" : "http://terminology.hl7.org/CodeSystem/v2-0203",
              "code" : "VN"
            }]
          }
        }
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        14. Encounter.identifier:VisitNumber.use
        Definition

        The purpose of this identifier.

        Shortusual | official | temp | secondary | old (If known)
        Comments

        Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

        Control0..1
        BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
        (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

        Identifies the purpose for this identifier, if known .

        Typecode
        Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        16. Encounter.identifier:VisitNumber.system
        Definition

        Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

        ShortThe namespace for the identifier value
        Comments

        Identifier.system is always case sensitive.

        Control10..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

        Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        18. Encounter.identifier:VisitNumber.value
        Definition

        The portion of the identifier typically relevant to the user and which is unique within the context of the system.

        ShortThe value that is unique
        Comments

        If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

        Control10..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Example<br/><b>General</b>:123456
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        20. Encounter.status
        Definition

        planned | arrived | triaged | in-progress | onleave | finished | cancelled +.

        Shortplanned | arrived | triaged | in-progress | onleave | finished | cancelled +
        Comments

        Note that internal business rules will determine the appropriate transitions that may occur between statuses (and also classes).

        Control1..1
        BindingThe codes SHALL be taken from EncounterStatushttp://hl7.org/fhir/ValueSet/encounter-status|4.0.1
        (required to http://hl7.org/fhir/ValueSet/encounter-status|4.0.1)

        Current state of the encounter.

        Typecode
        Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        22. Encounter.class
        Definition

        See mapping from BFS Medizinische Statistik BFS Encounter Class to FHIR mapping


        Concepts representing classification of patient encounter such as ambulatory (outpatient), inpatient, emergency, home health or others due to local variations.

        ShortAMB | IMP | EMERClassification of patient encounter
        Control1..1
        BindingThe codes SHALL be taken from Unless not suitable, these codes SHALL be taken from Encounter Classhttp://terminology.hl7.org/ValueSet/v3-ActEncounterCode
        (required to http://fhir.ch/ig/ch-orf/ValueSet/ch-orf-vs-encounterclass)
        TypeCoding
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        24. Encounter.subject
        Definition

        The patient or group present at the encounter.

        ShortThe patient or group present at the encounter
        Comments

        While the encounter is always about the patient, the patient might not actually be known in all contexts of use, and there may be a group of patients that could be anonymous (such as in a group therapy for Alcoholics Anonymous - where the recording of the encounter could be used for billing on the number of people/staff and not important to the context of the specific patients) or alternately in veterinary care a herd of sheep receiving treatment (where the animals are not individually tracked).

        Control10..1
        TypeReference(CH Core Patient, Patient, Group)
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Alternate Namespatient
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

        Guidance on how to interpret the contents of this table can be found here

        0. Encounter
        Definition

        This is basic constraint on Encounter for use in CH Core resources.

        ShortCH ORF Requested Encounter
        Control0..*
        Is Modifierfalse
        Summaryfalse
        Alternate NamesVisit
        Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
        dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
        dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
        dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
        dom-6: A resource should have narrative for robust management (text.`div`.exists())
        2. Encounter.id
        Definition

        The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

        ShortLogical id of this artifact
        Comments

        The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

        Control0..1
        Typeid
        Is Modifierfalse
        Summarytrue
        4. Encounter.meta
        Definition

        The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

        ShortMetadata about the resource
        Control0..1
        TypeMeta
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        6. Encounter.implicitRules
        Definition

        A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

        ShortA set of rules under which this content was created
        Comments

        Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

        Control0..1
        Typeuri
        Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        8. Encounter.language
        Definition

        The base language in which the resource is written.

        ShortLanguage of the resource content
        Comments

        Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

        Control0..1
        BindingThe codes SHOULD be taken from CommonLanguages
        (preferred to http://hl7.org/fhir/ValueSet/languages)

        A human language.

        Additional BindingsPurpose
        AllLanguagesMax Binding
        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        10. Encounter.text
        Definition

        A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

        ShortText summary of the resource, for human interpretation
        Comments

        Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

        Control0..1
        TypeNarrative
        Is Modifierfalse
        Summaryfalse
        Alternate Namesnarrative, html, xhtml, display
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        12. Encounter.contained
        Definition

        These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

        ShortContained, inline Resources
        Comments

        This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

        Control0..*
        TypeResource
        Is Modifierfalse
        Summaryfalse
        Alternate Namesinline resources, anonymous resources, contained resources
        14. Encounter.extension
        Definition

        An Extension

        ShortExtension
        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on Encounter.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 16. Encounter.extension:desiredAccomodation
          Slice NamedesiredAccomodation
          Definition

          Desired Accommodation during the Requested Encounter.

          ShortCH ORF Desired Accommodation
          Control0..1
          This element is affected by the following invariants: ele-1
          TypeExtension(CH ORF Desired Accommodation) (Extension Type: Coding)
          Is Modifierfalse
          Must Supporttrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          18. Encounter.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
          Summaryfalse
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          20. Encounter.identifier
          Definition

          Identifier(s) by which this encounter is known.

          ShortIdentifier(s) by which this encounter is known
          NoteThis is a business identifier, not a resource identifier (see discussion)
          Control0..*
          TypeIdentifier
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          SlicingThis element introduces a set of slices on Encounter.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • pattern @ $this
          • 22. Encounter.identifier:VisitNumber
            Slice NameVisitNumber
            Definition

            Identifier(s) by which this encounter is known.

            ShortVisit number (Fallnummer)
            NoteThis is a business identifier, not a resource identifier (see discussion)
            Control0..*
            TypeIdentifier
            Is Modifierfalse
            Summarytrue
            Pattern Value{
              "type" : {
                "coding" : [{
                  "system" : "http://terminology.hl7.org/CodeSystem/v2-0203",
                  "code" : "VN"
                }]
              }
            }
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            24. Encounter.identifier:VisitNumber.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            26. Encounter.identifier:VisitNumber.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on Encounter.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 28. Encounter.identifier:VisitNumber.use
              Definition

              The purpose of this identifier.

              Shortusual | official | temp | secondary | old (If known)
              Comments

              Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

              Control0..1
              BindingThe codes SHALL be taken from IdentifierUse
              (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

              Identifies the purpose for this identifier, if known .

              Typecode
              Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Requirements

              Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              30. Encounter.identifier:VisitNumber.type
              Definition

              A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

              ShortDescription of identifier
              Comments

              This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

              Control0..1
              BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
              (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

              A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

              TypeCodeableConcept
              Is Modifierfalse
              Summarytrue
              Requirements

              Allows users to make use of identifiers when the identifier system is not known.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              32. Encounter.identifier:VisitNumber.system
              Definition

              Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

              ShortThe namespace for the identifier value
              Comments

              Identifier.system is always case sensitive.

              Control1..1
              Typeuri
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Requirements

              There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

              Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              34. Encounter.identifier:VisitNumber.value
              Definition

              The portion of the identifier typically relevant to the user and which is unique within the context of the system.

              ShortThe value that is unique
              Comments

              If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Example<br/><b>General</b>:123456
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              36. Encounter.identifier:VisitNumber.period
              Definition

              Time period during which identifier is/was valid for use.

              ShortTime period when id is/was valid for use
              Control0..1
              TypePeriod
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              38. Encounter.identifier:VisitNumber.assigner
              Definition

              Organization that issued/manages the identifier.

              ShortOrganization that issued id (may be just text)
              Comments

              The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

              Control0..1
              TypeReference(Organization)
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              40. Encounter.status
              Definition

              planned | arrived | triaged | in-progress | onleave | finished | cancelled +.

              Shortplanned | arrived | triaged | in-progress | onleave | finished | cancelled +
              Comments

              Note that internal business rules will determine the appropriate transitions that may occur between statuses (and also classes).

              Control1..1
              BindingThe codes SHALL be taken from EncounterStatus
              (required to http://hl7.org/fhir/ValueSet/encounter-status|4.0.1)

              Current state of the encounter.

              Typecode
              Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              42. Encounter.statusHistory
              Definition

              The status history permits the encounter resource to contain the status history without needing to read through the historical versions of the resource, or even have the server store them.

              ShortList of past encounter statuses
              Comments

              The current status is always found in the current version of the resource, not the status history.

              Control0..*
              TypeBackboneElement
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              44. Encounter.statusHistory.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              46. Encounter.statusHistory.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              48. Encounter.statusHistory.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              50. Encounter.statusHistory.status
              Definition

              planned | arrived | triaged | in-progress | onleave | finished | cancelled +.

              Shortplanned | arrived | triaged | in-progress | onleave | finished | cancelled +
              Control1..1
              BindingThe codes SHALL be taken from EncounterStatus
              (required to http://hl7.org/fhir/ValueSet/encounter-status|4.0.1)

              Current state of the encounter.

              Typecode
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              52. Encounter.statusHistory.period
              Definition

              The time that the episode was in the specified status.

              ShortThe time that the episode was in the specified status
              Control1..1
              TypePeriod
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              54. Encounter.class
              Definition

              See mapping from BFS Medizinische Statistik BFS Encounter Class to FHIR mapping

              ShortAMB | IMP | EMER
              Control1..1
              BindingThe codes SHALL be taken from Encounter Class
              (required to http://fhir.ch/ig/ch-orf/ValueSet/ch-orf-vs-encounterclass)
              TypeCoding
              Is Modifierfalse
              Must Supporttrue
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              56. Encounter.classHistory
              Definition

              The class history permits the tracking of the encounters transitions without needing to go through the resource history. This would be used for a case where an admission starts of as an emergency encounter, then transitions into an inpatient scenario. Doing this and not restarting a new encounter ensures that any lab/diagnostic results can more easily follow the patient and not require re-processing and not get lost or cancelled during a kind of discharge from emergency to inpatient.

              ShortList of past encounter classes
              Control0..*
              TypeBackboneElement
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              58. Encounter.classHistory.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              60. Encounter.classHistory.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              62. Encounter.classHistory.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              64. Encounter.classHistory.class
              Definition

              inpatient | outpatient | ambulatory | emergency +.

              Shortinpatient | outpatient | ambulatory | emergency +
              Control1..1
              BindingUnless not suitable, these codes SHALL be taken from ActEncounterCode
              (extensible to http://terminology.hl7.org/ValueSet/v3-ActEncounterCode)

              Classification of the encounter.

              TypeCoding
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              66. Encounter.classHistory.period
              Definition

              The time that the episode was in the specified class.

              ShortThe time that the episode was in the specified class
              Control1..1
              TypePeriod
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              68. Encounter.type
              Definition

              Specific type of encounter (e.g. e-mail consultation, surgical day-care, skilled nursing, rehabilitation).

              ShortSpecific type of encounter
              Comments

              Since there are many ways to further classify encounters, this element is 0..*.

              Control0..*
              BindingFor example codes, see EncounterType
              (example to http://hl7.org/fhir/ValueSet/encounter-type)

              The type of encounter.

              TypeCodeableConcept
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              70. Encounter.serviceType
              Definition

              Broad categorization of the service that is to be provided (e.g. cardiology).

              ShortSpecific type of service
              Control0..1
              BindingFor example codes, see ServiceType
              (example to http://hl7.org/fhir/ValueSet/service-type)

              Broad categorization of the service that is to be provided.

              TypeCodeableConcept
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              72. Encounter.priority
              Definition

              Indicates the urgency of the encounter.

              ShortBFS Medizinische Statistik - Eintrittsart / Mode d’admission / Genere di ricovero
              Control0..1
              BindingUnless not suitable, these codes SHALL be taken from BFS Medizinische Statistik - 18 1.2.V03 - Eintrittsart / Mode d’admission / Genere di ricovero
              (extensible to http://fhir.ch/ig/ch-core/ValueSet/bfs-medstats-18-admittype)
              TypeCodeableConcept
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              74. Encounter.subject
              Definition

              The patient or group present at the encounter.

              ShortThe patient or group present at the encounter
              Comments

              While the encounter is always about the patient, the patient might not actually be known in all contexts of use, and there may be a group of patients that could be anonymous (such as in a group therapy for Alcoholics Anonymous - where the recording of the encounter could be used for billing on the number of people/staff and not important to the context of the specific patients) or alternately in veterinary care a herd of sheep receiving treatment (where the animals are not individually tracked).

              Control1..1
              TypeReference(CH Core Patient)
              Is Modifierfalse
              Must Supporttrue
              Summarytrue
              Alternate Namespatient
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              76. Encounter.episodeOfCare
              Definition

              Where a specific encounter should be classified as a part of a specific episode(s) of care this field should be used. This association can facilitate grouping of related encounters together for a specific purpose, such as government reporting, issue tracking, association via a common problem. The association is recorded on the encounter as these are typically created after the episode of care and grouped on entry rather than editing the episode of care to append another encounter to it (the episode of care could span years).

              ShortEpisode(s) of care that this encounter should be recorded against
              Control0..*
              TypeReference(EpisodeOfCare)
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              78. Encounter.basedOn
              Definition

              The request this encounter satisfies (e.g. incoming referral or procedure request).

              ShortThe ServiceRequest that initiated this encounter
              Control0..*
              TypeReference(ServiceRequest)
              Is Modifierfalse
              Summaryfalse
              Alternate NamesincomingReferral
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              80. Encounter.participant
              Definition

              The list of people responsible for providing the service.

              ShortList of participants involved in the encounter
              Control0..*
              TypeBackboneElement
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              82. Encounter.participant.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              84. Encounter.participant.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              86. Encounter.participant.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              88. Encounter.participant.type
              Definition

              Role of participant in encounter.

              ShortRole of participant in encounter
              Comments

              The participant type indicates how an individual participates in an encounter. It includes non-practitioner participants, and for practitioners this is to describe the action type in the context of this encounter (e.g. Admitting Dr, Attending Dr, Translator, Consulting Dr). This is different to the practitioner roles which are functional roles, derived from terms of employment, education, licensing, etc.

              Control0..*
              BindingUnless not suitable, these codes SHALL be taken from ChCoreEncounterParticipationType
              (extensible to http://fhir.ch/ig/ch-core/ValueSet/ch-core-encounter-participation-type)
              TypeCodeableConcept
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              90. Encounter.participant.period
              Definition

              The period of time that the specified participant participated in the encounter. These can overlap or be sub-sets of the overall encounter's period.

              ShortPeriod of time during the encounter that the participant participated
              Control0..1
              TypePeriod
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              92. Encounter.participant.individual
              Definition

              Persons involved in the encounter other than the patient.

              ShortPersons involved in the encounter other than the patient
              Control0..1
              TypeReference(CH Core Practitioner)
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              94. Encounter.appointment
              Definition

              The appointment that scheduled this encounter.

              ShortThe appointment that scheduled this encounter
              Control0..*
              TypeReference(Appointment)
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              96. Encounter.period
              Definition

              The start and end time of the encounter.

              ShortThe start and end time of the encounter
              Comments

              If not (yet) known, the end of the Period may be omitted.

              Control0..1
              TypePeriod
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              98. Encounter.length
              Definition

              Quantity of time the encounter lasted. This excludes the time during leaves of absence.

              ShortQuantity of time the encounter lasted (less time absent)
              Comments

              May differ from the time the Encounter.period lasted because of leave of absence.

              Control0..1
              TypeDuration
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              100. Encounter.reasonCode
              Definition

              Reason the encounter takes place, expressed as a code. For admissions, this can be used for a coded admission diagnosis.

              ShortCoded reason the encounter takes place
              Comments

              For systems that need to know which was the primary diagnosis, these will be marked with the standard extension primaryDiagnosis (which is a sequence value rather than a flag, 1 = primary diagnosis).

              Control0..*
              BindingThe codes SHOULD be taken from EncounterReasonCodes
              (preferred to http://hl7.org/fhir/ValueSet/encounter-reason)

              Reason why the encounter takes place.

              TypeCodeableConcept
              Is Modifierfalse
              Summarytrue
              Alternate NamesIndication, Admission diagnosis
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              102. Encounter.reasonReference
              Definition

              Reason the encounter takes place, expressed as a code. For admissions, this can be used for a coded admission diagnosis.

              ShortReason the encounter takes place (reference)
              Comments

              For systems that need to know which was the primary diagnosis, these will be marked with the standard extension primaryDiagnosis (which is a sequence value rather than a flag, 1 = primary diagnosis).

              Control0..*
              TypeReference(Condition, Procedure, Observation, ImmunizationRecommendation)
              Is Modifierfalse
              Summarytrue
              Alternate NamesIndication, Admission diagnosis
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              104. Encounter.diagnosis
              Definition

              The list of diagnosis relevant to this encounter.

              ShortThe list of diagnosis relevant to this encounter
              Control0..*
              TypeBackboneElement
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              106. Encounter.diagnosis.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              108. Encounter.diagnosis.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              110. Encounter.diagnosis.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              112. Encounter.diagnosis.condition
              Definition

              Reason the encounter takes place, as specified using information from another resource. For admissions, this is the admission diagnosis. The indication will typically be a Condition (with other resources referenced in the evidence.detail), or a Procedure.

              ShortThe diagnosis or procedure relevant to the encounter
              Comments

              For systems that need to know which was the primary diagnosis, these will be marked with the standard extension primaryDiagnosis (which is a sequence value rather than a flag, 1 = primary diagnosis).

              Control1..1
              TypeReference(Condition, Procedure)
              Is Modifierfalse
              Summarytrue
              Alternate NamesAdmission diagnosis, discharge diagnosis, indication
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              114. Encounter.diagnosis.use
              Definition

              Role that this diagnosis has within the encounter (e.g. admission, billing, discharge …).

              ShortRole that this diagnosis has within the encounter (e.g. admission, billing, discharge …)
              Control0..1
              BindingThe codes SHOULD be taken from DiagnosisRole
              (preferred to http://hl7.org/fhir/ValueSet/diagnosis-role)

              The type of diagnosis this condition represents.

              TypeCodeableConcept
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              116. Encounter.diagnosis.rank
              Definition

              Ranking of the diagnosis (for each role type).

              ShortRanking of the diagnosis (for each role type)
              Control0..1
              TypepositiveInt
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              118. Encounter.account
              Definition

              The set of accounts that may be used for billing for this Encounter.

              ShortThe set of accounts that may be used for billing for this Encounter
              Comments

              The billing system may choose to allocate billable items associated with the Encounter to different referenced Accounts based on internal business rules.

              Control0..*
              TypeReference(Account)
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              120. Encounter.hospitalization
              Definition

              Details about the admission to a healthcare service.

              ShortDetails about the admission to a healthcare service
              Comments

              An Encounter may cover more than just the inpatient stay. Contexts such as outpatients, community clinics, and aged care facilities are also included.

              The duration recorded in the period of this encounter covers the entire scope of this hospitalization record.

              Control0..1
              TypeBackboneElement
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              122. Encounter.hospitalization.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              124. Encounter.hospitalization.extension
              Definition

              An Extension

              ShortExtension
              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              SlicingThis element introduces a set of slices on Encounter.hospitalization.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 126. Encounter.hospitalization.extension:BfsAdmitRole
                Slice NameBfsAdmitRole
                Definition

                Optional Extension Element - found in all resources.

                ShortBFS Medizinische Statistik - Einweisende Instanz
                Control0..1
                This element is affected by the following invariants: ele-1
                TypeExtension(BFS Extension Medical Statistic: Admit Role for Encounter) (Extension Type: Coding)
                Is Modifierfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                128. Encounter.hospitalization.extension:accident
                Slice Nameaccident
                Definition

                Extension to define an encounter is caused by an accident and at which time the accident happened

                ShortFlag if hospitalization was due to an accident
                Control0..1
                This element is affected by the following invariants: ele-1
                TypeExtension(If an encounter is caused by an accident) (Complex Extension)
                Is Modifierfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                130. Encounter.hospitalization.extension:readmission
                Slice Namereadmission
                Definition

                Optional Extension Element - found in all resources.

                ShortFlag to indicate if it is a suspected readmission
                Control0..1
                This element is affected by the following invariants: ele-1
                TypeExtension(Encounter, Suspected Readmission) (Extension Type: boolean)
                Is Modifierfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                132. Encounter.hospitalization.extension:BfsDischargeDecision
                Slice NameBfsDischargeDecision
                Definition

                Optional Extension Element - found in all resources.

                ShortBFS Medizinische Statistik - Entscheid für Austritt
                Control0..1
                This element is affected by the following invariants: ele-1
                TypeExtension(BFS Extension Medical Statistic: Discharge Décision for Encounter) (Extension Type: Coding)
                Is Modifierfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                134. Encounter.hospitalization.extension:BfsDischargeDestination
                Slice NameBfsDischargeDestination
                Definition

                Optional Extension Element - found in all resources.

                ShortBFS Medizinische Statistik - Aufenthalt nach Austritt
                Control0..1
                This element is affected by the following invariants: ele-1
                TypeExtension(BFS Extension Medical Statistic: Discharge Destination for Encounter) (Extension Type: Coding)
                Is Modifierfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                136. Encounter.hospitalization.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                138. Encounter.hospitalization.preAdmissionIdentifier
                Definition

                Pre-admission identifier.

                ShortPre-admission identifier
                Control0..1
                TypeIdentifier
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                140. Encounter.hospitalization.origin
                Definition

                The location/organization from which the patient came before admission.

                ShortThe location/organization from which the patient came before admission
                Control0..1
                TypeReference(CH Core Location, CH Core Organization)
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                142. Encounter.hospitalization.admitSource
                Definition

                From where patient was admitted (physician referral, transfer).

                ShortBFS Medizinische Statistik - Aufenthaltsort vor dem Eintritt / Séjour avant l’admission / Luogo di soggiorno prima dell’ammissione
                Control0..1
                BindingUnless not suitable, these codes SHALL be taken from BFS Medizinische Statistik - 17 1.2.V02 - Aufenthaltsort vor dem Eintritt / Séjour avant l’admission / Luogo di soggiorno prima dell’ammissione
                (extensible to http://fhir.ch/ig/ch-core/ValueSet/bfs-medstats-17-admitsource)
                TypeCodeableConcept
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                144. Encounter.hospitalization.reAdmission
                Definition

                Whether this hospitalization is a readmission and why if known.

                ShortThe type of hospital re-admission that has occurred (if any). If the value is absent, then this is not identified as a readmission
                Control0..1
                BindingFor example codes, see hl7VS-re-admissionIndicator
                (example to http://terminology.hl7.org/ValueSet/v2-0092)

                The reason for re-admission of this hospitalization encounter.

                TypeCodeableConcept
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                146. Encounter.hospitalization.dietPreference
                Definition

                Diet preferences reported by the patient.

                ShortDiet preferences reported by the patient
                Comments

                For example, a patient may request both a dairy-free and nut-free diet preference (not mutually exclusive).

                Control0..*
                BindingFor example codes, see Diet
                (example to http://hl7.org/fhir/ValueSet/encounter-diet)

                Medical, cultural or ethical food preferences to help with catering requirements.

                TypeCodeableConcept
                Is Modifierfalse
                Summaryfalse
                Requirements

                Used to track patient's diet restrictions and/or preference. For a complete description of the nutrition needs of a patient during their stay, one should use the nutritionOrder resource which links to Encounter.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                148. Encounter.hospitalization.specialCourtesy
                Definition

                Special courtesies (VIP, board member).

                ShortSpecial courtesies (VIP, board member)
                Control0..*
                BindingThe codes SHOULD be taken from SpecialCourtesy
                (preferred to http://hl7.org/fhir/ValueSet/encounter-special-courtesy)

                Special courtesies.

                TypeCodeableConcept
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                150. Encounter.hospitalization.specialArrangement
                Definition

                Any special requests that have been made for this hospitalization encounter, such as the provision of specific equipment or other things.

                ShortWheelchair, translator, stretcher, etc.
                Control0..*
                BindingThe codes SHOULD be taken from SpecialArrangements
                (preferred to http://hl7.org/fhir/ValueSet/encounter-special-arrangements)

                Special arrangements.

                TypeCodeableConcept
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                152. Encounter.hospitalization.destination
                Definition

                Location/organization to which the patient is discharged.

                ShortLocation/organization to which the patient is discharged
                Control0..1
                TypeReference(CH Core Location, CH Core Organization)
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                154. Encounter.hospitalization.dischargeDisposition
                Definition

                Category or kind of location after discharge.

                ShortBFS Medizinische Statistik - Behandlung nach Austritt
                Control0..1
                BindingThe codes SHOULD be taken from BFS Medizinische Statistik - 29 1.5.V04 - Behandlung nach Austritt / Prise en charge après la sortie / Trattamento dopo l’uscita
                (preferred to http://fhir.ch/ig/ch-core/ValueSet/bfs-medstats-29-dischargeencounter)

                BFS Medizinische Statistik - Behandlung nach Austritt

                TypeCodeableConcept
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                156. Encounter.location
                Definition

                List of locations where the patient has been during this encounter.

                ShortList of locations where the patient has been
                Comments

                Virtual encounters can be recorded in the Encounter by specifying a location reference to a location of type "kind" such as "client's home" and an encounter.class = "virtual".

                Control0..*
                TypeBackboneElement
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                158. Encounter.location.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                160. Encounter.location.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                162. Encounter.location.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                164. Encounter.location.location
                Definition

                The location where the encounter takes place.

                ShortLocation the encounter takes place
                Control1..1
                TypeReference(CH Core Location)
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                166. Encounter.location.status
                Definition

                The status of the participants' presence at the specified location during the period specified. If the participant is no longer at the location, then the period will have an end date/time.

                Shortplanned | active | reserved | completed
                Comments

                When the patient is no longer active at a location, then the period end date is entered, and the status may be changed to completed.

                Control0..1
                BindingThe codes SHALL be taken from EncounterLocationStatus
                (required to http://hl7.org/fhir/ValueSet/encounter-location-status|4.0.1)

                The status of the location.

                Typecode
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                168. Encounter.location.physicalType
                Definition

                This will be used to specify the required levels (bed/ward/room/etc.) desired to be recorded to simplify either messaging or query.

                ShortThe physical type of the location (usually the level in the location hierachy - bed room ward etc.)
                Comments

                This information is de-normalized from the Location resource to support the easier understanding of the encounter resource and processing in messaging or query.

                There may be many levels in the hierachy, and this may only pic specific levels that are required for a specific usage scenario.

                Control0..1
                BindingFor example codes, see LocationType
                (example to http://hl7.org/fhir/ValueSet/location-physical-type)

                Physical form of the location.

                TypeCodeableConcept
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                170. Encounter.location.period
                Definition

                Time period during which the patient was present at the location.

                ShortTime period during which the patient was present at the location
                Control0..1
                TypePeriod
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                172. Encounter.serviceProvider
                Definition

                The organization that is primarily responsible for this Encounter's services. This MAY be the same as the organization on the Patient record, however it could be different, such as if the actor performing the services was from an external organization (which may be billed seperately) for an external consultation. Refer to the example bundle showing an abbreviated set of Encounters for a colonoscopy.

                ShortThe organization (facility) responsible for this encounter
                Control0..1
                TypeReference(CH Core Organization)
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                174. Encounter.partOf
                Definition

                Another Encounter of which this encounter is a part of (administratively or in time).

                ShortAnother Encounter this encounter is part of
                Comments

                This is also used for associating a child's encounter back to the mother's encounter.

                Refer to the Notes section in the Patient resource for further details.

                Control0..1
                TypeReference(CH Core Encounter)
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))