CH.FHIR.IG.CH-EMED\CH EMED Dosage Structured Profile Split Dosing (MedicationRequest)

CH EMED (R4)
2.0.0 - STU 2

This page is part of the CH EMED (R4) (v2.0.0: STU 2) based on FHIR R4. . For a full list of available versions, see the Directory of published versions

Data Type Profile: CH EMED Dosage Structured Profile Split Dosing (MedicationRequest)

Defining URL:

http://fhir.ch/ig/ch-emed/StructureDefinition/ch-emed-dosage-structured-split-medicationrequest

Version:

2.0.0

Name:

CHEMEDDosageStructuredSplitMedicationRequest

Title:

CH EMED Dosage Structured Profile Split Dosing (MedicationRequest)

Status:

Active as of 2022-02-11 09:56:31+0100

Definition:

Split dosing (IHE PHARM 1.3.6.1.4.1.19376.1.5.3.1.4.9)

Publisher:

HL7 Switzerland

Copyright:

CC-BY-SA-4.0

Source Resource:

XML / JSON / Turtle

The official URL for this profile is:

http://fhir.ch/ig/ch-emed/StructureDefinition/ch-emed-dosage-structured-split-medicationrequest

Formal Views of Profile Content

Description of Profiles, Differentials, Snapshots and how the different presentations work.

Text Summary
Differential Table
Snapshot Table
Snapshot Table (Must Support)
All

This structure is derived from CHEMEDDosageStructuredSplit

Summary

Mandatory: 5 elements

Structures

This structure refers to these other structures:

This structure is derived from CHEMEDDosageStructuredSplit

Name	Card.	Type	Description & Constraints
Dosage	0..*	CHEMEDDosageStructuredSplit	CH EMED Dosage Structured Split Dosing (MedicationRequest)
Slices for extension	0..*	Extension	Extension Slice: Unordered, Open by value:url
sequence	1..1	integer	The order of the dosage instructions
text	0..0	string
timing	1..1	Timing	When medication should be administered
repeat	1..1	Element	When the event is to occur
boundsPeriod	1..1	Period	Start and/or end of treatment
start	0..1	dateTime	Starting time with inclusive boundary
end	0..1	dateTime	End time with inclusive boundary, if not ongoing
when	1..*	code	Code for time period of occurrence
route	0..1	CodeableConcept	Route of administration Binding: EDQM - RouteOfAdministration (required)
coding	1..*	Coding	Code defined by a terminology system
system	1..1	uri	Identity of the terminology system
code	1..1	code	Symbol in syntax defined by the system
display	1..1	string	Representation defined by the system
doseAndRate	1..1	Element	Amount of medication administered
dose[x]	0..1		Amount of medication per dose
doseRange		Range(CHEMEDRangeWithEmedUnits)
doseQuantity		Quantity(CHEMEDQuantityWithEmedUnits)
Documentation for this format

Name	Flags	Card.	Type	Description & Constraints
Dosage		0..*	CHEMEDDosageStructuredSplit	CH EMED Dosage Structured Split Dosing (MedicationRequest)
id		0..1	string	Unique id for inter-element referencing
Slices for extension		0..*	Extension	Extension Slice: Unordered, Open by value:url
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
sequence	Σ	1..1	integer	The order of the dosage instructions
additionalInstruction	Σ	0..*	CodeableConcept	Supplemental instruction or warnings to the patient - e.g. "with meals", "may cause drowsiness" Binding: SNOMEDCTAdditionalDosageInstructions (example): A coded concept identifying additional instructions such as "take with water" or "avoid operating heavy machinery".
patientInstruction	Σ	0..1	string	Patient or consumer oriented instructions
timing	Σ	1..1	Timing	When medication should be administered
id		0..1	string	Unique id for inter-element referencing
Slices for extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
event	Σ	0..*	dateTime	When the event occurs
repeat	ΣI	1..1	Element	When the event is to occur
id		0..1	string	Unique id for inter-element referencing
Slices for extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
Slices for bounds[x]	Σ	0..1	Period	Length/Range of lengths, or (Start and/or end) limits Slice: Unordered, Closed by type:$this
bounds[x]:boundsPeriod	SΣ	1..1	Period	Start and/or end of treatment
id		0..1	string	Unique id for inter-element referencing
Slices for extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
start	ΣI	0..1	dateTime	Starting time with inclusive boundary
end	ΣI	0..1	dateTime	End time with inclusive boundary, if not ongoing
count	Σ	0..1	positiveInt	Number of times to repeat
countMax	Σ	0..1	positiveInt	Maximum number of times to repeat
duration	Σ	0..1	decimal	How long when it happens
durationMax	Σ	0..1	decimal	How long when it happens (Max)
durationUnit	Σ	0..1	code	s \| min \| h \| d \| wk \| mo \| a - unit of time (UCUM) Binding: UnitsOfTime (required): A unit of time (units from UCUM).
frequency	Σ	0..1	positiveInt	Event occurs frequency times per period
frequencyMax	Σ	0..1	positiveInt	Event occurs up to frequencyMax times per period
period	Σ	0..1	decimal	Event occurs frequency times per period
periodMax	Σ	0..1	decimal	Upper limit of period (3-4 hours)
periodUnit	Σ	0..1	code	s \| min \| h \| d \| wk \| mo \| a - unit of time (UCUM) Binding: UnitsOfTime (required): A unit of time (units from UCUM).
dayOfWeek	Σ	0..*	code	mon \| tue \| wed \| thu \| fri \| sat \| sun Binding: DaysOfWeek (required)
timeOfDay	Σ	0..*	time	Time of day for action
when	SΣI	1..*	code	Code for time period of occurrence Binding: EventTiming (required): Real world event relating to the schedule.
offset	Σ	0..1	unsignedInt	Minutes from event (before or after)
code	Σ	0..1	CodeableConcept	BID \| TID \| QID \| AM \| PM \| QD \| QOD \| + Binding: TimingAbbreviation (preferred): Code for a known / defined timing pattern.
asNeeded[x]	Σ	0..1		Take "as needed" (for x) Binding: SNOMEDCTMedicationAsNeededReasonCodes (example): A coded concept identifying the precondition that should be met or evaluated prior to consuming or administering a medication dose. For example "pain", "30 minutes prior to sexual intercourse", "on flare-up" etc.
asNeededBoolean			boolean
asNeededCodeableConcept			CodeableConcept
site	Σ	0..1	CodeableConcept	Body site to administer to Binding: SNOMEDCTAnatomicalStructureForAdministrationSiteCodes (example): A coded concept describing the site location the medicine enters into or onto the body.
route	Σ	0..1	CodeableConcept	Route of administration Binding: EDQM - RouteOfAdministration (required)
id		0..1	string	Unique id for inter-element referencing
Slices for extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
coding	SΣ	1..*	Coding	Code defined by a terminology system
id		0..1	string	Unique id for inter-element referencing
Slices for extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
system	Σ	1..1	uri	Identity of the terminology system
version	Σ	0..1	string	Version of the system - if relevant
code	Σ	1..1	code	Symbol in syntax defined by the system
display	Σ	1..1	string	Representation defined by the system
userSelected	Σ	0..1	boolean	If this coding was chosen directly by the user
text	Σ	0..1	string	Plain text representation of the concept
method	Σ	0..1	CodeableConcept	Technique for administering medication Binding: SNOMEDCTAdministrationMethodCodes (example): A coded concept describing the technique by which the medicine is administered.
doseAndRate	Σ	1..1	Element	Amount of medication administered
id		0..1	string	Unique id for inter-element referencing
Slices for extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
type	Σ	0..1	CodeableConcept	The kind of dose or rate specified Binding: DoseAndRateType (example): The kind of dose or rate specified.
dose[x]	SΣ	0..1		Amount of medication per dose
doseRange			Range(CHEMEDRangeWithEmedUnits)
doseQuantity			Quantity(CHEMEDQuantityWithEmedUnits)
rate[x]	Σ	0..1		Amount of medication per unit of time
rateRatio			Ratio
rateRange			Range
rateQuantity			Quantity(SimpleQuantity)
maxDosePerPeriod	Σ	0..1	Ratio	Upper limit on medication per unit of time
maxDosePerAdministration	Σ	0..1	SimpleQuantity	Upper limit on medication per administration
maxDosePerLifetime	Σ	0..1	SimpleQuantity	Upper limit on medication per lifetime of the patient
Documentation for this format

Name	Flags	Card.	Type	Description & Constraints
Dosage		0..*	CHEMEDDosageStructuredSplit	CH EMED Dosage Structured Split Dosing (MedicationRequest)
timing	Σ	1..1	Timing	When medication should be administered
repeat	ΣI	1..1	Element	When the event is to occur
bounds[x]:boundsPeriod	Σ	1..1	Period	Start and/or end of treatment
when	ΣI	1..*	code	Code for time period of occurrence Binding: EventTiming (required): Real world event relating to the schedule.
route	Σ	0..1	CodeableConcept	Route of administration
coding	Σ	1..*	Coding	Code defined by a terminology system
doseAndRate	Σ	1..1	Element	Amount of medication administered
dose[x]	Σ	0..1		Amount of medication per dose
doseRange			Range(CHEMEDRangeWithEmedUnits)
doseQuantity			Quantity(CHEMEDQuantityWithEmedUnits)
Documentation for this format

This structure is derived from CHEMEDDosageStructuredSplit

Summary

Mandatory: 5 elements

Structures

This structure refers to these other structures:

Differential View

This structure is derived from CHEMEDDosageStructuredSplit

Name	Card.	Type	Description & Constraints
Dosage	0..*	CHEMEDDosageStructuredSplit	CH EMED Dosage Structured Split Dosing (MedicationRequest)
Slices for extension	0..*	Extension	Extension Slice: Unordered, Open by value:url
sequence	1..1	integer	The order of the dosage instructions
text	0..0	string
timing	1..1	Timing	When medication should be administered
repeat	1..1	Element	When the event is to occur
boundsPeriod	1..1	Period	Start and/or end of treatment
start	0..1	dateTime	Starting time with inclusive boundary
end	0..1	dateTime	End time with inclusive boundary, if not ongoing
when	1..*	code	Code for time period of occurrence
route	0..1	CodeableConcept	Route of administration Binding: EDQM - RouteOfAdministration (required)
coding	1..*	Coding	Code defined by a terminology system
system	1..1	uri	Identity of the terminology system
code	1..1	code	Symbol in syntax defined by the system
display	1..1	string	Representation defined by the system
doseAndRate	1..1	Element	Amount of medication administered
dose[x]	0..1		Amount of medication per dose
doseRange		Range(CHEMEDRangeWithEmedUnits)
doseQuantity		Quantity(CHEMEDQuantityWithEmedUnits)
Documentation for this format

Snapshot View

Name	Flags	Card.	Type	Description & Constraints
Dosage		0..*	CHEMEDDosageStructuredSplit	CH EMED Dosage Structured Split Dosing (MedicationRequest)
id		0..1	string	Unique id for inter-element referencing
Slices for extension		0..*	Extension	Extension Slice: Unordered, Open by value:url
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
sequence	Σ	1..1	integer	The order of the dosage instructions
additionalInstruction	Σ	0..*	CodeableConcept	Supplemental instruction or warnings to the patient - e.g. "with meals", "may cause drowsiness" Binding: SNOMEDCTAdditionalDosageInstructions (example): A coded concept identifying additional instructions such as "take with water" or "avoid operating heavy machinery".
patientInstruction	Σ	0..1	string	Patient or consumer oriented instructions
timing	Σ	1..1	Timing	When medication should be administered
id		0..1	string	Unique id for inter-element referencing
Slices for extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
event	Σ	0..*	dateTime	When the event occurs
repeat	ΣI	1..1	Element	When the event is to occur
id		0..1	string	Unique id for inter-element referencing
Slices for extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
Slices for bounds[x]	Σ	0..1	Period	Length/Range of lengths, or (Start and/or end) limits Slice: Unordered, Closed by type:$this
bounds[x]:boundsPeriod	SΣ	1..1	Period	Start and/or end of treatment
id		0..1	string	Unique id for inter-element referencing
Slices for extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
start	ΣI	0..1	dateTime	Starting time with inclusive boundary
end	ΣI	0..1	dateTime	End time with inclusive boundary, if not ongoing
count	Σ	0..1	positiveInt	Number of times to repeat
countMax	Σ	0..1	positiveInt	Maximum number of times to repeat
duration	Σ	0..1	decimal	How long when it happens
durationMax	Σ	0..1	decimal	How long when it happens (Max)
durationUnit	Σ	0..1	code	s \| min \| h \| d \| wk \| mo \| a - unit of time (UCUM) Binding: UnitsOfTime (required): A unit of time (units from UCUM).
frequency	Σ	0..1	positiveInt	Event occurs frequency times per period
frequencyMax	Σ	0..1	positiveInt	Event occurs up to frequencyMax times per period
period	Σ	0..1	decimal	Event occurs frequency times per period
periodMax	Σ	0..1	decimal	Upper limit of period (3-4 hours)
periodUnit	Σ	0..1	code	s \| min \| h \| d \| wk \| mo \| a - unit of time (UCUM) Binding: UnitsOfTime (required): A unit of time (units from UCUM).
dayOfWeek	Σ	0..*	code	mon \| tue \| wed \| thu \| fri \| sat \| sun Binding: DaysOfWeek (required)
timeOfDay	Σ	0..*	time	Time of day for action
when	SΣI	1..*	code	Code for time period of occurrence Binding: EventTiming (required): Real world event relating to the schedule.
offset	Σ	0..1	unsignedInt	Minutes from event (before or after)
code	Σ	0..1	CodeableConcept	BID \| TID \| QID \| AM \| PM \| QD \| QOD \| + Binding: TimingAbbreviation (preferred): Code for a known / defined timing pattern.
asNeeded[x]	Σ	0..1		Take "as needed" (for x) Binding: SNOMEDCTMedicationAsNeededReasonCodes (example): A coded concept identifying the precondition that should be met or evaluated prior to consuming or administering a medication dose. For example "pain", "30 minutes prior to sexual intercourse", "on flare-up" etc.
asNeededBoolean			boolean
asNeededCodeableConcept			CodeableConcept
site	Σ	0..1	CodeableConcept	Body site to administer to Binding: SNOMEDCTAnatomicalStructureForAdministrationSiteCodes (example): A coded concept describing the site location the medicine enters into or onto the body.
route	Σ	0..1	CodeableConcept	Route of administration Binding: EDQM - RouteOfAdministration (required)
id		0..1	string	Unique id for inter-element referencing
Slices for extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
coding	SΣ	1..*	Coding	Code defined by a terminology system
id		0..1	string	Unique id for inter-element referencing
Slices for extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
system	Σ	1..1	uri	Identity of the terminology system
version	Σ	0..1	string	Version of the system - if relevant
code	Σ	1..1	code	Symbol in syntax defined by the system
display	Σ	1..1	string	Representation defined by the system
userSelected	Σ	0..1	boolean	If this coding was chosen directly by the user
text	Σ	0..1	string	Plain text representation of the concept
method	Σ	0..1	CodeableConcept	Technique for administering medication Binding: SNOMEDCTAdministrationMethodCodes (example): A coded concept describing the technique by which the medicine is administered.
doseAndRate	Σ	1..1	Element	Amount of medication administered
id		0..1	string	Unique id for inter-element referencing
Slices for extension		0..*	Extension	Additional content defined by implementations Slice: Unordered, Open by value:url
type	Σ	0..1	CodeableConcept	The kind of dose or rate specified Binding: DoseAndRateType (example): The kind of dose or rate specified.
dose[x]	SΣ	0..1		Amount of medication per dose
doseRange			Range(CHEMEDRangeWithEmedUnits)
doseQuantity			Quantity(CHEMEDQuantityWithEmedUnits)
rate[x]	Σ	0..1		Amount of medication per unit of time
rateRatio			Ratio
rateRange			Range
rateQuantity			Quantity(SimpleQuantity)
maxDosePerPeriod	Σ	0..1	Ratio	Upper limit on medication per unit of time
maxDosePerAdministration	Σ	0..1	SimpleQuantity	Upper limit on medication per administration
maxDosePerLifetime	Σ	0..1	SimpleQuantity	Upper limit on medication per lifetime of the patient
Documentation for this format

Other representations of profile: CSV, Excel, Schematron

Terminology Bindings

Path	Conformance	ValueSet
Dosage.additionalInstruction	example	SNOMEDCTAdditionalDosageInstructions
Dosage.timing.repeat.durationUnit	required	UnitsOfTime
Dosage.timing.repeat.periodUnit	required	UnitsOfTime
Dosage.timing.repeat.dayOfWeek	required	DaysOfWeek
Dosage.timing.repeat.when	required	EventTiming
Dosage.timing.code	preferred	TimingAbbreviation
Dosage.asNeeded[x]	example	SNOMEDCTMedicationAsNeededReasonCodes
Dosage.site	example	SNOMEDCTAnatomicalStructureForAdministrationSiteCodes
Dosage.route	required	RouteOfAdministrationEDQM
Dosage.method	example	SNOMEDCTAdministrationMethodCodes
Dosage.doseAndRate.type	example	DoseAndRateType

Constraints

Id	Grade	Path	Details	Requirements
ele-1	error	Dosage	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.extension	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ext-1	error	Dosage.extension	Must have either extensions or value[x], not both : extension.exists() != value.exists()
ele-1	error	Dosage.modifierExtension	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ext-1	error	Dosage.modifierExtension	Must have either extensions or value[x], not both : extension.exists() != value.exists()
ele-1	error	Dosage.sequence	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.additionalInstruction	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.patientInstruction	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.timing	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.timing.extension	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ext-1	error	Dosage.timing.extension	Must have either extensions or value[x], not both : extension.exists() != value.exists()
ele-1	error	Dosage.timing.modifierExtension	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ext-1	error	Dosage.timing.modifierExtension	Must have either extensions or value[x], not both : extension.exists() != value.exists()
ele-1	error	Dosage.timing.event	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.timing.repeat	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
tim-1	error	Dosage.timing.repeat	if there's a duration, there needs to be duration units : duration.empty() or durationUnit.exists()
tim-2	error	Dosage.timing.repeat	if there's a period, there needs to be period units : period.empty() or periodUnit.exists()
tim-4	error	Dosage.timing.repeat	duration SHALL be a non-negative value : duration.exists() implies duration >= 0
tim-5	error	Dosage.timing.repeat	period SHALL be a non-negative value : period.exists() implies period >= 0
tim-6	error	Dosage.timing.repeat	If there's a periodMax, there must be a period : periodMax.empty() or period.exists()
tim-7	error	Dosage.timing.repeat	If there's a durationMax, there must be a duration : durationMax.empty() or duration.exists()
tim-8	error	Dosage.timing.repeat	If there's a countMax, there must be a count : countMax.empty() or count.exists()
tim-9	error	Dosage.timing.repeat	If there's an offset, there must be a when (and not C, CM, CD, CV) : offset.empty() or (when.exists() and ((when in ('C' \| 'CM' \| 'CD' \| 'CV')).not()))
tim-10	error	Dosage.timing.repeat	If there's a timeOfDay, there cannot be a when, or vice versa : timeOfDay.empty() or when.empty()
ele-1	error	Dosage.timing.repeat.extension	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ext-1	error	Dosage.timing.repeat.extension	Must have either extensions or value[x], not both : extension.exists() != value.exists()
ele-1	error	Dosage.timing.repeat.bounds[x]	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.timing.repeat.bounds[x]:boundsPeriod	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.timing.repeat.bounds[x]:boundsPeriod.extension	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ext-1	error	Dosage.timing.repeat.bounds[x]:boundsPeriod.extension	Must have either extensions or value[x], not both : extension.exists() != value.exists()
ele-1	error	Dosage.timing.repeat.bounds[x]:boundsPeriod.start	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.timing.repeat.bounds[x]:boundsPeriod.end	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.timing.repeat.count	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.timing.repeat.countMax	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.timing.repeat.duration	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.timing.repeat.durationMax	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.timing.repeat.durationUnit	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.timing.repeat.frequency	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.timing.repeat.frequencyMax	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.timing.repeat.period	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.timing.repeat.periodMax	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.timing.repeat.periodUnit	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.timing.repeat.dayOfWeek	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.timing.repeat.timeOfDay	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.timing.repeat.when	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ch-emed-event-timing	warning	Dosage.timing.repeat.when	For the representation of the time of administration according to the 1-1-1-1 scheme, the values MORN-NOON-EVE-NIGHT are highly recommended. : $this='MORN' or $this='NOON' or $this='EVE' or $this='NIGHT'
ele-1	error	Dosage.timing.repeat.offset	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.timing.code	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.asNeeded[x]	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.site	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.route	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.route.extension	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ext-1	error	Dosage.route.extension	Must have either extensions or value[x], not both : extension.exists() != value.exists()
ele-1	error	Dosage.route.coding	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.route.coding.extension	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ext-1	error	Dosage.route.coding.extension	Must have either extensions or value[x], not both : extension.exists() != value.exists()
ele-1	error	Dosage.route.coding.system	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.route.coding.version	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.route.coding.code	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.route.coding.display	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.route.coding.userSelected	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.route.text	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.method	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.doseAndRate	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.doseAndRate.extension	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ext-1	error	Dosage.doseAndRate.extension	Must have either extensions or value[x], not both : extension.exists() != value.exists()
ele-1	error	Dosage.doseAndRate.type	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.doseAndRate.dose[x]	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.doseAndRate.rate[x]	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.maxDosePerPeriod	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.maxDosePerAdministration	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())
ele-1	error	Dosage.maxDosePerLifetime	All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count())

IG © 2021+ HL7 Switzerland. Package ch.fhir.ig.ch-emed#2.0.0 based on FHIR 4.0.1. Generated 2022-02-11
Links: Table of Contents | QA Report | Propose a change