CH EMED EPR
1.0.0 - trial-use Switzerland flag

This page is part of the FHIR eMedication exchange formats for the implementation effort of CARA within its EPR community (v1.0.0: STU1) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version. For a full list of available versions, see the Directory of published versions

Resource Profile: CHEMEDEPRDevice - Detailed Descriptions

Draft as of 2024-01-26

Definitions for the ch-emed-epr-device resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Device
2. Device.meta
4. Device.meta.extension
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
6. Device.meta.versionId
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
8. Device.meta.lastUpdated
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
10. Device.meta.source
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
12. Device.meta.security
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
14. Device.meta.tag
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
16. Device.implicitRules
Comments

...All modifiers SHALL be documented in the profile, in order to be usable.

Control0..0
18. Device.modifierExtension
Comments

...All modifiers SHALL be documented in the profile, in order to be usable.

Control0..0
20. Device.identifier
NoteThis is a business identifier, not a resource identifier (see discussion)
22. Device.identifier.extension
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
24. Device.identifier.type
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
26. Device.identifier.period
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
28. Device.identifier.assigner
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element will be removed in PML(C) documents
Comments

✕ Unsupported reference. It'll be stripped when generating PML(C) documents.

TypeReference(CH EMED EPR Organization)
Standards StatusDraft (from Trial Use)
30. Device.definition
Short✕ This element will be removed in PML(C) documents
Comments

✕ Unsupported reference. It'll be stripped when generating PML(C) documents.

Standards StatusDraft (from Trial Use)
32. Device.udiCarrier
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
34. Device.status
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
36. Device.statusReason
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
38. Device.type
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
40. Device.specialization
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
42. Device.property
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
44. Device.patient
Short✕ This element will be removed in PML(C) documents
Comments

✕ Unsupported reference. It'll be stripped when generating PML(C) documents.

Standards StatusDraft (from Trial Use)
46. Device.owner
Short✕ This element will be removed in PML(C) documents
Comments

✕ Unsupported reference. It'll be stripped when generating PML(C) documents.

TypeReference(CH EMED EPR Organization)
Standards StatusDraft (from Trial Use)
48. Device.location
Short✕ This element will be removed in PML(C) documents
Comments

✕ Unsupported reference. It'll be stripped when generating PML(C) documents.

Standards StatusDraft (from Trial Use)
50. Device.note
52. Device.note.author[x]
[x] NoteSee Choice of Data Types for further information about how to use [x]
SlicingThis element introduces a set of slices on Device.note.author[x]. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • type @ $this
54. Device.note.author[x]:authorReference
Slice NameauthorReference
Short✕ This element will be removed in PML(C) documents
Comments

✕ Unsupported reference. It'll be stripped when generating PML(C) documents.

Control0..1
TypeReference(Practitioner, Patient, RelatedPerson, Organization)
[x] NoteSee Choice of Data Types for further information about how to use [x]
Standards StatusDraft (from Trial Use)
56. Device.safety
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
58. Device.parent
Short✕ This element will be removed in PML(C) documents
Comments

✕ Unsupported reference. It'll be stripped when generating PML(C) documents.

Standards StatusDraft (from Trial Use)

Guidance on how to interpret the contents of this table can be found here

0. Device
Definition

A type of a manufactured item that is used in the provision of healthcare without being substantially changed through that activity. The device may be a medical or non-medical device.

ShortItem used in healthcare
Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Device.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. All modifiers SHALL be documented in the profile, in order to be usable.


Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..01
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Device.modifierExtension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensionExtensions that cannot be ignored
Comments

All modifiers SHALL be documented in the profile, in order to be usable.


There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. Device.definition
Definition

The reference to the definition for the device.

Short✕ This element will be removed in PML(C) documentsThe reference to the definition for the device
Comments

✕ Unsupported reference. It'll be stripped when generating PML(C) documents.

Control0..1
TypeReference(DeviceDefinition)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. Device.udiCarrier
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.


Unique device identifier (UDI) assigned to device label or package. Note that the Device may include multiple udiCarriers as it either may include just the udiCarrier for the jurisdiction it is sold, or for multiple jurisdictions it could have been sold.

Short✕ This element is not supportedUnique Device Identifier (UDI) Barcode string
Comments

UDI may identify an unique instance of a device, or it may only identify the type of the device. See UDI mappings for a complete mapping of UDI parts to Device.

Control0..*
TypeBackboneElement
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Device.udiCarrier.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
12. Device.status
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.


Status of the Device availability.

Short✕ This element is not supportedactive | inactive | entered-in-error | unknown
Comments

This element is labeled as a modifier because the status contains the codes inactive and entered-in-error that mark the device (record)as not currently valid.

Control0..1
BindingThe codes SHALL be taken from FHIRDeviceStatushttp://hl7.org/fhir/ValueSet/device-status|4.0.1
(required to http://hl7.org/fhir/ValueSet/device-status|4.0.1
Typecode
Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. Device.statusReason
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.


Reason for the dtatus of the Device availability.

Short✕ This element is not supportedonline | paused | standby | offline | not-ready | transduc-discon | hw-discon | off
Control0..*
BindingUnless not suitable, these codes SHALL be taken from FHIRDeviceStatusReasonhttp://hl7.org/fhir/ValueSet/device-status-reason
(extensible to http://hl7.org/fhir/ValueSet/device-status-reason
TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. Device.type
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.


The kind or type of device.

Short✕ This element is not supportedThe kind or type of device
Control0..1
BindingFor example codes, see DeviceTypehttp://hl7.org/fhir/ValueSet/device-type
(example to http://hl7.org/fhir/ValueSet/device-type
TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. Device.specialization
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.


The capabilities supported on a device, the standards to which the device conforms for a particular purpose, and used for the communication.

Short✕ This element is not supportedThe capabilities supported on a device, the standards to which the device conforms for a particular purpose, and used for the communication
Control0..*
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Device.specialization.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
22. Device.specialization.systemType
Definition

The standard that is used to operate and communicate.

ShortThe standard that is used to operate and communicate
Control1..1
TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Alternate NamesΣ
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. Device.property
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.


The actual configuration settings of a device as it actually operates, e.g., regulation status, time properties.

Short✕ This element is not supportedThe actual configuration settings of a device as it actually operates, e.g., regulation status, time properties
Control0..*
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Device.property.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
28. Device.property.type
Definition

Code that specifies the property DeviceDefinitionPropetyCode (Extensible).

ShortCode that specifies the property DeviceDefinitionPropetyCode (Extensible)
Control1..1
TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. Device.patient
Definition

Patient information, If the device is affixed to a person.

Short✕ This element will be removed in PML(C) documentsPatient to whom Device is affixed
Comments

✕ Unsupported reference. It'll be stripped when generating PML(C) documents.

Control0..1
TypeReference(Patient)
Is Modifierfalse
Summaryfalse
Requirements

If the device is implanted in a patient, then need to associate the device to the patient.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. Device.owner
Definition

An organization that is responsible for the provision and ongoing maintenance of the device.

Short✕ This element will be removed in PML(C) documentsOrganization responsible for device
Comments

✕ Unsupported reference. It'll be stripped when generating PML(C) documents.

Control0..1
TypeReference(CH EMED EPR Organization, Organization)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. Device.location
Definition

The place where the device can be found.

Short✕ This element will be removed in PML(C) documentsWhere the device is found
Comments

✕ Unsupported reference. It'll be stripped when generating PML(C) documents.

Control0..1
TypeReference(Location)
Is Modifierfalse
Summaryfalse
Requirements

Device.location can be used to track device location.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. Device.safety
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.


Provides additional safety characteristics about a medical device. For example devices containing latex.

Short✕ This element is not supportedSafety Characteristics of Device
Control0..*
TypeCodeableConcept
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. Device.parent
Definition

The parent device.

Short✕ This element will be removed in PML(C) documentsThe parent device
Comments

✕ Unsupported reference. It'll be stripped when generating PML(C) documents.

Control0..1
TypeReference(Device)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here

0. Device
Definition

A type of a manufactured item that is used in the provision of healthcare without being substantially changed through that activity. The device may be a medical or non-medical device.

ShortItem used in healthcare
Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Device.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

ShortLogical id of this artifact
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control0..1
Typeid
Is Modifierfalse
Summarytrue
4. Device.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

ShortMetadata about the resource
Control0..1
TypeMeta
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Device.meta.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
8. Device.meta.extension
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Device.meta.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
10. Device.meta.versionId
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Comments

The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes.

Control0..1
Typeid
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Device.meta.lastUpdated
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Comments

This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a read interaction.

Control0..1
Typeinstant
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. Device.meta.source
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Comments

In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used.

This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL.

Control0..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. Device.meta.profile
Definition

A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url.

ShortProfiles this resource claims to conform to
Comments

It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set.

Control0..*
Typecanonical(StructureDefinition)
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. Device.meta.security
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Comments

The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored.

Control0..*
BindingUnless not suitable, these codes SHALL be taken from All Security Labels
(extensible to http://hl7.org/fhir/ValueSet/security-labels
TypeCoding
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Device.meta.tag
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Comments

The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.

Control0..*
BindingFor example codes, see CommonTags
(example to http://hl7.org/fhir/ValueSet/common-tags
TypeCoding
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. Device.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. All modifiers SHALL be documented in the profile, in order to be usable.

Control0..0
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. Device.language
Definition

The base language in which the resource is written.

ShortLanguage of the resource content
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control0..1
BindingThe codes SHOULD be taken from CommonLanguages
(preferred to http://hl7.org/fhir/ValueSet/languages
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Device.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

ShortText summary of the resource, for human interpretation
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Control0..1
TypeNarrative
Is Modifierfalse
Summaryfalse
Alternate Namesnarrative, html, xhtml, display
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. Device.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

Control0..*
TypeResource
Is Modifierfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
30. Device.extension
Definition

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
32. Device.modifierExtension
Definition

An Extension

ShortExtension
Comments

All modifiers SHALL be documented in the profile, in order to be usable.

Control0..0
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
34. Device.identifier
Definition

Unique instance identifiers assigned to a device by manufacturers other organizations or owners.

ShortInstance identifier
Comments

The barcode string from a barcode present on a device label or package may identify the instance, include names given to the device in local usage, or may identify the type of device. If the identifier identifies the type of device, Device.type element should be used.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. Device.identifier.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
38. Device.identifier.extension
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Device.identifier.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
40. Device.identifier.use
Definition

The purpose of this identifier.

Shortusual | official | temp | secondary | old (If known)
Comments

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Control0..1
BindingThe codes SHALL be taken from IdentifierUse
(required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1
Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. Device.identifier.type
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Comments

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Control0..1
BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
(extensible to http://hl7.org/fhir/ValueSet/identifier-type
TypeCodeableConcept
Is Modifierfalse
Summarytrue
Requirements

Allows users to make use of identifiers when the identifier system is not known.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
44. Device.identifier.system
Definition

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

ShortThe namespace for the identifier value
Comments

Identifier.system is always case sensitive.

Control0..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. Device.identifier.value
Definition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

ShortThe value that is unique
Comments

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Example<br/><b>General</b>:123456
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
48. Device.identifier.period
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Control0..1
TypePeriod
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. Device.identifier.assigner
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element will be removed in PML(C) documents
Comments

✕ Unsupported reference. It'll be stripped when generating PML(C) documents.

Control0..1
TypeReference(CH EMED EPR Organization)
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. Device.definition
Definition

The reference to the definition for the device.

Short✕ This element will be removed in PML(C) documents
Comments

✕ Unsupported reference. It'll be stripped when generating PML(C) documents.

Control0..1
TypeReference(DeviceDefinition)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
54. Device.udiCarrier
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Comments

UDI may identify an unique instance of a device, or it may only identify the type of the device. See UDI mappings for a complete mapping of UDI parts to Device.

Control0..*
TypeBackboneElement
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
56. Device.udiCarrier.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
58. Device.udiCarrier.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
60. Device.udiCarrier.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
62. Device.udiCarrier.deviceIdentifier
Definition

The device identifier (DI) is a mandatory, fixed portion of a UDI that identifies the labeler and the specific version or model of a device.

ShortMandatory fixed portion of UDI
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Alternate NamesDI
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
64. Device.udiCarrier.issuer
Definition

Organization that is charged with issuing UDIs for devices. For example, the US FDA issuers include :

  1. GS1: http://hl7.org/fhir/NamingSystem/gs1-di,
  2. HIBCC: http://hl7.org/fhir/NamingSystem/hibcc-dI,
  3. ICCBBA for blood containers: http://hl7.org/fhir/NamingSystem/iccbba-blood-di,
  4. ICCBA for other devices: http://hl7.org/fhir/NamingSystem/iccbba-other-di.
ShortUDI Issuing Organization
Control0..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Alternate NamesBarcode System
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
66. Device.udiCarrier.jurisdiction
Definition

The identity of the authoritative source for UDI generation within a jurisdiction. All UDIs are globally unique within a single namespace with the appropriate repository uri as the system. For example, UDIs of devices managed in the U.S. by the FDA, the value is http://hl7.org/fhir/NamingSystem/fda-udi.

ShortRegional UDI authority
Control0..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

Allows a recipient of a UDI to know which database will contain the UDI-associated metadata.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
68. Device.udiCarrier.carrierAIDC
Definition

The full UDI carrier of the Automatic Identification and Data Capture (AIDC) technology representation of the barcode string as printed on the packaging of the device - e.g., a barcode or RFID. Because of limitations on character sets in XML and the need to round-trip JSON data through XML, AIDC Formats SHALL be base64 encoded.

ShortUDI Machine Readable Barcode String
Comments

The AIDC form of UDIs should be scanned or otherwise used for the identification of the device whenever possible to minimize errors in records resulting from manual transcriptions. If separate barcodes for DI and PI are present, concatenate the string with DI first and in order of human readable expression on label.

Control0..1
Typebase64Binary
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Alternate NamesAutomatic Identification and Data Capture
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
70. Device.udiCarrier.carrierHRF
Definition

The full UDI carrier as the human readable form (HRF) representation of the barcode string as printed on the packaging of the device.

ShortUDI Human Readable Barcode String
Comments

If separate barcodes for DI and PI are present, concatenate the string with DI first and in order of human readable expression on label.

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Alternate NamesHuman Readable Form
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
72. Device.udiCarrier.entryType
Definition

A coded entry to indicate how the data was entered.

Shortbarcode | rfid | manual +
Control0..1
BindingThe codes SHALL be taken from UDIEntryType
(required to http://hl7.org/fhir/ValueSet/udi-entry-type|4.0.1
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

Supports a way to distinguish hand entered from machine read data.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
74. Device.status
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Comments

This element is labeled as a modifier because the status contains the codes inactive and entered-in-error that mark the device (record)as not currently valid.

Control0..1
BindingThe codes SHALL be taken from FHIRDeviceStatus
(required to http://hl7.org/fhir/ValueSet/device-status|4.0.1
Typecode
Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
76. Device.statusReason
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Control0..*
BindingUnless not suitable, these codes SHALL be taken from FHIRDeviceStatusReason
(extensible to http://hl7.org/fhir/ValueSet/device-status-reason
TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
78. Device.distinctIdentifier
Definition

The distinct identification string as required by regulation for a human cell, tissue, or cellular and tissue-based product.

ShortThe distinct identification string
Comments

For example, this applies to devices in the United States regulated under Code of Federal Regulation 21CFR§1271.290(c).

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Alternate NamesDistinct Identification Code (DIC)
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
80. Device.manufacturer
Definition

A name of the manufacturer.

ShortName of device manufacturer
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
82. Device.manufactureDate
Definition

The date and time when the device was manufactured.

ShortDate when the device was made
Control0..1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
84. Device.expirationDate
Definition

The date and time beyond which this device is no longer valid or should not be used (if applicable).

ShortDate and time of expiry of this device (if applicable)
Control0..1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
86. Device.lotNumber
Definition

Lot number assigned by the manufacturer.

ShortLot number of manufacture
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
88. Device.serialNumber
Definition

The serial number assigned by the organization when the device was manufactured.

ShortSerial number assigned by the manufacturer
Comments

Alphanumeric Maximum 20.

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
90. Device.deviceName
Definition

This represents the manufacturer's name of the device as provided by the device, from a UDI label, or by a person describing the Device. This typically would be used when a person provides the name(s) or when the device represents one of the names available from DeviceDefinition.

ShortThe name of the device as given by the manufacturer
Control0..*
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
92. Device.deviceName.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
94. Device.deviceName.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
96. Device.deviceName.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
98. Device.deviceName.name
Definition

The name of the device.

ShortThe name of the device
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Alternate NamesΣ
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
100. Device.deviceName.type
Definition

The type of deviceName. UDILabelName | UserFriendlyName | PatientReportedName | ManufactureDeviceName | ModelName.

Shortudi-label-name | user-friendly-name | patient-reported-name | manufacturer-name | model-name | other
Control1..1
BindingThe codes SHALL be taken from DeviceNameType
(required to http://hl7.org/fhir/ValueSet/device-nametype|4.0.1
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
102. Device.modelNumber
Definition

The model number for the device.

ShortThe model number for the device
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
104. Device.partNumber
Definition

The part number of the device.

ShortThe part number of the device
Comments

Alphanumeric Maximum 20.

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
106. Device.type
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Control0..1
BindingFor example codes, see DeviceType
(example to http://hl7.org/fhir/ValueSet/device-type
TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
108. Device.specialization
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Control0..*
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
110. Device.specialization.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
112. Device.specialization.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
114. Device.specialization.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
116. Device.specialization.systemType
Definition

The standard that is used to operate and communicate.

ShortThe standard that is used to operate and communicate
Control1..1
TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Alternate NamesΣ
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
118. Device.specialization.version
Definition

The version of the standard that is used to operate and communicate.

ShortThe version of the standard that is used to operate and communicate
NoteThis is a business versionId, not a resource version id (see discussion)
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
120. Device.version
Definition

The actual design of the device or software version running on the device.

ShortThe actual design of the device or software version running on the device
NoteThis is a business versionId, not a resource version id (see discussion)
Control0..*
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
122. Device.version.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
124. Device.version.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
126. Device.version.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
128. Device.version.type
Definition

The type of the device version.

ShortThe type of the device version
Control0..1
TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Alternate NamesΣ
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
130. Device.version.component
Definition

A single component of the device version.

ShortA single component of the device version
Control0..1
TypeIdentifier
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
132. Device.version.value
Definition

The version text.

ShortThe version text
Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
134. Device.property
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Control0..*
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
136. Device.property.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
138. Device.property.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
140. Device.property.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
142. Device.property.type
Definition

Code that specifies the property DeviceDefinitionPropetyCode (Extensible).

ShortCode that specifies the property DeviceDefinitionPropetyCode (Extensible)
Control1..1
TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
144. Device.property.valueQuantity
Definition

Property value as a quantity.

ShortProperty value as a quantity
Control0..*
TypeQuantity
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
146. Device.property.valueCode
Definition

Property value as a code, e.g., NTP4 (synced to NTP).

ShortProperty value as a code, e.g., NTP4 (synced to NTP)
Control0..*
TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
148. Device.patient
Definition

Patient information, If the device is affixed to a person.

Short✕ This element will be removed in PML(C) documents
Comments

✕ Unsupported reference. It'll be stripped when generating PML(C) documents.

Control0..1
TypeReference(Patient)
Is Modifierfalse
Summaryfalse
Requirements

If the device is implanted in a patient, then need to associate the device to the patient.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
150. Device.owner
Definition

An organization that is responsible for the provision and ongoing maintenance of the device.

Short✕ This element will be removed in PML(C) documents
Comments

✕ Unsupported reference. It'll be stripped when generating PML(C) documents.

Control0..1
TypeReference(CH EMED EPR Organization)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
152. Device.contact
Definition

Contact details for an organization or a particular human that is responsible for the device.

ShortDetails for human/organization for support
Comments

used for troubleshooting etc.

Control0..*
TypeContactPoint
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
154. Device.location
Definition

The place where the device can be found.

Short✕ This element will be removed in PML(C) documents
Comments

✕ Unsupported reference. It'll be stripped when generating PML(C) documents.

Control0..1
TypeReference(Location)
Is Modifierfalse
Summaryfalse
Requirements

Device.location can be used to track device location.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
156. Device.url
Definition

A network address on which the device may be contacted directly.

ShortNetwork address to contact device
Comments

If the device is running a FHIR server, the network address should be the Base URL from which a conformance statement may be retrieved.

Control0..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
158. Device.note
Definition

Descriptive information, usage information or implantation information that is not captured in an existing element.

ShortDevice notes and comments
Control0..*
TypeAnnotation
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
160. Device.note.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
162. Device.note.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Device.note.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
164. Device.note.author[x]
Definition

The individual responsible for making the annotation.

ShortIndividual responsible for the annotation
Comments

Organization is used when there's no need for specific attribution as to who made the comment.

Control0..1
TypeChoice of: Reference(Practitioner, Patient, RelatedPerson, Organization), string
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Device.note.author[x]. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • type @ $this
166. Device.note.author[x]:authorReference
Slice NameauthorReference
Definition

The individual responsible for making the annotation.

Short✕ This element will be removed in PML(C) documents
Comments

✕ Unsupported reference. It'll be stripped when generating PML(C) documents.

Control0..1
TypeReference(Practitioner, Patient, RelatedPerson, Organization)
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
168. Device.note.time
Definition

Indicates when this particular annotation was made.

ShortWhen the annotation was made
Control0..1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
170. Device.note.text
Definition

The text of the annotation in markdown format.

ShortThe annotation - text content (as markdown)
Control1..1
Typemarkdown
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
172. Device.safety
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Control0..*
TypeCodeableConcept
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
174. Device.parent
Definition

The parent device.

Short✕ This element will be removed in PML(C) documents
Comments

✕ Unsupported reference. It'll be stripped when generating PML(C) documents.

Control0..1
TypeReference(Device)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))