CH ELM (R4)
1.3.0 - release Switzerland flag

This page is part of the Observations of notifiable communicable infectious diseases (v1.3.0: Release) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions

Extension: ChExtElmStatus - Detailed Descriptions

Active as of 2024-05-17

Definitions for the ch-ext-elm-status extension.

Guidance on how to interpret the contents of this table can be found here

0. Extension
Definition

Extension to define the status of the processing of the document

ShortStatus of the processing of the document
2. Extension.extension
Control1..?
4. Extension.extension:status
Slice Namestatus
ShortStatus of the processing of the document
Control1..1
6. Extension.extension:status.extension
Control0..0
8. Extension.extension:status.url
Fixed Valuestatus
10. Extension.extension:status.value[x]
Control1..?
[x] NoteSee Choice of Data Types for further information about how to use [x]
SlicingThis element introduces a set of slices on Extension.extension.value[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • type @ $this
  • 12. Extension.extension:status.value[x]:valueCode
    Slice NamevalueCode
    ShortCode to indicate the status of the processing of the document
    Control1..1
    BindingThe codes SHALL be taken from CH ELM Status
    (required to http://fhir.ch/ig/ch-elm/ValueSet/ch-elm-status)
    Typecode
    [x] NoteSee Choice of Data Types for further information about how to use [x]
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    14. Extension.extension:outcome
    Slice Nameoutcome
    ShortTimestamp of the authorship/data input
    Control0..1
    16. Extension.extension:outcome.extension
    Control0..0
    18. Extension.extension:outcome.url
    Fixed Valueoutcome
    20. Extension.extension:outcome.value[x]
    Control1..?
    [x] NoteSee Choice of Data Types for further information about how to use [x]
    SlicingThis element introduces a set of slices on Extension.extension.value[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • type @ $this
    • 22. Extension.extension:outcome.value[x]:valueReference
      Slice NamevalueReference
      Shortreference to contained OperationOutcome if processing failed
      Control1..1
      TypeReference(OperationOutcome)contained
      [x] NoteSee Choice of Data Types for further information about how to use [x]
      24. Extension.url
      Fixed Valuehttp://fhir.ch/ig/ch-elm/StructureDefinition/ch-ext-elm-status
      26. Extension.value[x]
      Control0..0

      Guidance on how to interpret the contents of this table can be found here

      0. Extension
      Definition

      Extension to define the status of the processing of the document


      Optional Extension Element - found in all resources.

      ShortStatus of the processing of the documentOptional Extensions Element
      Control0..*
      This element is affected by the following invariants: ele-1
      Is Modifierfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      2. Extension.extension
      Definition

      An Extension


      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortExtensionAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control10..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 4. Extension.extension:status
        Slice Namestatus
        Definition

        An Extension

        ShortStatus of the processing of the documentAdditional content defined by implementations
        Control10..1*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        6. Extension.extension:status.extension
        Definition

        An Extension


        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortExtensionAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..0*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 8. Extension.extension:status.url
          Definition

          Source of the definition for the extension code - a logical name or a URL.

          Shortidentifies the meaning of the extension
          Comments

          The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

          Control1..1
          Typeuri
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          Fixed Valuestatus
          10. Extension.extension:status.value[x]
          Definition

          Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

          ShortValue of extension
          Control10..1
          Typecode, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
          [x] NoteSee Choice of Data Types for further information about how to use [x]
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          SlicingThis element introduces a set of slices on Extension.extension.value[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
          • type @ $this
          • 12. Extension.extension:status.value[x]:valueCode
            Slice NamevalueCode
            Definition

            Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

            ShortCode to indicate the status of the processing of the documentValue of extension
            Control10..1
            BindingThe codes SHALL be taken from For codes, see CH ELM Status
            (required to http://fhir.ch/ig/ch-elm/ValueSet/ch-elm-status)
            Typecode, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
            [x] NoteSee Choice of Data Types for further information about how to use [x]
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            14. Extension.extension:outcome
            Slice Nameoutcome
            Definition

            An Extension

            ShortTimestamp of the authorship/data inputAdditional content defined by implementations
            Control0..1*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            16. Extension.extension:outcome.extension
            Definition

            An Extension


            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortExtensionAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..0*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 18. Extension.extension:outcome.url
              Definition

              Source of the definition for the extension code - a logical name or a URL.

              Shortidentifies the meaning of the extension
              Comments

              The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

              Control1..1
              Typeuri
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              Fixed Valueoutcome
              20. Extension.extension:outcome.value[x]
              Definition

              Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

              ShortValue of extension
              Control10..1
              TypeReference, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
              [x] NoteSee Choice of Data Types for further information about how to use [x]
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              SlicingThis element introduces a set of slices on Extension.extension.value[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
              • type @ $this
              • 22. Extension.extension:outcome.value[x]:valueReference
                Slice NamevalueReference
                Definition

                Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                Shortreference to contained OperationOutcome if processing failedValue of extension
                Control10..1
                TypeReference(OperationOutcome)contained, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
                [x] NoteSee Choice of Data Types for further information about how to use [x]
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                24. Extension.url
                Definition

                Source of the definition for the extension code - a logical name or a URL.

                Shortidentifies the meaning of the extension
                Comments

                The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                Control1..1
                Typeuri
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                Fixed Valuehttp://fhir.ch/ig/ch-elm/StructureDefinition/ch-ext-elm-status
                26. Extension.value[x]
                Definition

                Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                ShortValue of extension
                Control0..01
                TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

                Guidance on how to interpret the contents of this table can be found here

                0. Extension
                Definition

                Extension to define the status of the processing of the document

                ShortStatus of the processing of the document
                Control0..*
                This element is affected by the following invariants: ele-1
                Is Modifierfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                2. Extension.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                4. Extension.extension
                Definition

                An Extension

                ShortExtension
                Control1..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                SlicingThis element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ url
                • 6. Extension.extension:status
                  Slice Namestatus
                  Definition

                  An Extension

                  ShortStatus of the processing of the document
                  Control1..1
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  8. Extension.extension:status.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  10. Extension.extension:status.extension
                  Definition

                  An Extension

                  ShortExtension
                  Control0..0
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  SlicingThis element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • value @ url
                  • 12. Extension.extension:status.url
                    Definition

                    Source of the definition for the extension code - a logical name or a URL.

                    Shortidentifies the meaning of the extension
                    Comments

                    The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                    Control1..1
                    Typeuri
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    Fixed Valuestatus
                    14. Extension.extension:status.value[x]
                    Definition

                    Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                    ShortValue of extension
                    Control1..1
                    Typecode
                    [x] NoteSee Choice of Data Types for further information about how to use [x]
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    SlicingThis element introduces a set of slices on Extension.extension.value[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
                    • type @ $this
                    • 16. Extension.extension:status.value[x]:valueCode
                      Slice NamevalueCode
                      Definition

                      Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                      ShortCode to indicate the status of the processing of the document
                      Control1..1
                      BindingThe codes SHALL be taken from CH ELM Status
                      (required to http://fhir.ch/ig/ch-elm/ValueSet/ch-elm-status)
                      Typecode
                      [x] NoteSee Choice of Data Types for further information about how to use [x]
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      18. Extension.extension:outcome
                      Slice Nameoutcome
                      Definition

                      An Extension

                      ShortTimestamp of the authorship/data input
                      Control0..1
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      20. Extension.extension:outcome.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      22. Extension.extension:outcome.extension
                      Definition

                      An Extension

                      ShortExtension
                      Control0..0
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      SlicingThis element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                      • value @ url
                      • 24. Extension.extension:outcome.url
                        Definition

                        Source of the definition for the extension code - a logical name or a URL.

                        Shortidentifies the meaning of the extension
                        Comments

                        The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                        Control1..1
                        Typeuri
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        Fixed Valueoutcome
                        26. Extension.extension:outcome.value[x]
                        Definition

                        Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                        ShortValue of extension
                        Control1..1
                        TypeReference
                        [x] NoteSee Choice of Data Types for further information about how to use [x]
                        Is Modifierfalse
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        SlicingThis element introduces a set of slices on Extension.extension.value[x]. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
                        • type @ $this
                        • 28. Extension.extension:outcome.value[x]:valueReference
                          Slice NamevalueReference
                          Definition

                          Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                          Shortreference to contained OperationOutcome if processing failed
                          Control1..1
                          TypeReference(OperationOutcome)contained
                          [x] NoteSee Choice of Data Types for further information about how to use [x]
                          Is Modifierfalse
                          Summaryfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          30. Extension.url
                          Definition

                          Source of the definition for the extension code - a logical name or a URL.

                          Shortidentifies the meaning of the extension
                          Comments

                          The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                          Control1..1
                          Typeuri
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          Fixed Valuehttp://fhir.ch/ig/ch-elm/StructureDefinition/ch-ext-elm-status
                          32. Extension.value[x]
                          Definition

                          Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                          ShortValue of extension
                          Control0..0
                          TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summaryfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))