CH Core (R4)
4.0.1 - trial-use Switzerland flag

This page is part of the CH Core (R4) (v4.0.1: STU 4) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions

Data Type Profile: CHCoreContactPointECH46Email - Detailed Descriptions

Active as of 2023-12-28

Definitions for the ch-core-contactpoint-ech-46-email data type profile.

Guidance on how to interpret the contents of this table can be found here

0. ContactPoint
ShortCH Core ContactPoint eCH-0046 Email
2. ContactPoint.system
Control1..?
Fixed Valueemail
4. ContactPoint.value
Control1..?
6. ContactPoint.use
8. ContactPoint.use.extension
SlicingThis element introduces a set of slices on ContactPoint.use.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
10. ContactPoint.use.extension:emailCategory
Slice NameemailCategory
Control0..1
TypeExtension(eCH-0046 Email Category) (Extension Type: CodeableConcept)
12. ContactPoint.period
14. ContactPoint.period.start
16. ContactPoint.period.end

Guidance on how to interpret the contents of this table can be found here

0. ContactPoint
Definition

Details for all kinds of technology mediated contact points for a person or organization, including telephone, email, etc.

ShortCH Core ContactPoint eCH-0046 EmailDetails of a Technology mediated contact point (phone, fax, email, etc.)
Control0..*
This element is affected by the following invariants: ele-1
Is Modifierfalse
Invariantscpt-2: A system is required if a value is provided. (value.empty() or system.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
cpt-2: A system is required if a value is provided. (value.empty() or system.exists())
2. ContactPoint.system
Definition

Telecommunications form for contact point - what communications system is required to make use of the contact.

Shortphone | fax | email | pager | url | sms | other
Control10..1
This element is affected by the following invariants: cpt-2
BindingThe codes SHALL be taken from ContactPointSystemhttp://hl7.org/fhir/ValueSet/contact-point-system|4.0.1

Telecommunications form for contact point.

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Fixed Valueemail
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. ContactPoint.value
Definition

The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).

ShortThe actual contact point details
Comments

Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.

Control10..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to support legacy numbers that are not in a tightly controlled format.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. ContactPoint.use
Definition

Identifies the purpose for the contact point.

Shorthome | work | temp | old | mobile - purpose of this contact point
Comments

Applications can assume that a contact is current unless it explicitly says that it is temporary or old.

Control0..1
BindingThe codes SHALL be taken from ContactPointUsehttp://hl7.org/fhir/ValueSet/contact-point-use|4.0.1

Use of contact point.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. ContactPoint.use.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on ContactPoint.use.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
10. ContactPoint.use.extension:emailCategory
Slice NameemailCategory
Definition

Optional Extension Element - found in all resources.

ShortOptional Extensions Element
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(eCH-0046 Email Category) (Extension Type: CodeableConcept)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
12. ContactPoint.period
Definition

Time period when the contact point was/is in use.

ShortTime period when the contact point was/is in use
Control0..1
TypePeriod
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. ContactPoint.period.start
Definition

The start of the period. The boundary is inclusive.

ShortStarting time with inclusive boundary
Comments

If the low element is missing, the meaning is that the low boundary is not known.

Control0..1
This element is affected by the following invariants: per-1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. ContactPoint.period.end
Definition

The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.

ShortEnd time with inclusive boundary, if not ongoing
Comments

The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.

Control0..1
This element is affected by the following invariants: per-1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Meaning if MissingIf the end of the period is missing, it means that the period is ongoing
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here

0. ContactPoint
Definition

Details for all kinds of technology mediated contact points for a person or organization, including telephone, email, etc.

ShortCH Core ContactPoint eCH-0046 Email
Control0..*
This element is affected by the following invariants: ele-1
Is Modifierfalse
Invariantscpt-2: A system is required if a value is provided. (value.empty() or system.exists())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
2. ContactPoint.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
4. ContactPoint.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on ContactPoint.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
6. ContactPoint.system
Definition

Telecommunications form for contact point - what communications system is required to make use of the contact.

Shortphone | fax | email | pager | url | sms | other
Control1..1
This element is affected by the following invariants: cpt-2
BindingThe codes SHALL be taken from ContactPointSystem

Telecommunications form for contact point.

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Fixed Valueemail
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. ContactPoint.value
Definition

The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).

ShortThe actual contact point details
Comments

Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.

Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to support legacy numbers that are not in a tightly controlled format.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. ContactPoint.use
Definition

Identifies the purpose for the contact point.

Shorthome | work | temp | old | mobile - purpose of this contact point
Comments

Applications can assume that a contact is current unless it explicitly says that it is temporary or old.

Control0..1
BindingThe codes SHALL be taken from ContactPointUse

Use of contact point.

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. ContactPoint.use.id
Definition

unique id for the element within a resource (for internal references)

Shortxml:id (or equivalent in JSON)
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
14. ContactPoint.use.extension
Definition

An Extension

ShortExtension
Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on ContactPoint.use.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
16. ContactPoint.use.extension:emailCategory
Slice NameemailCategory
Definition

Optional Extension Element - found in all resources.

ShortOptional Extensions Element
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(eCH-0046 Email Category) (Extension Type: CodeableConcept)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. ContactPoint.use.value
Definition

Primitive value for code

ShortPrimitive value for code
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
20. ContactPoint.rank
Definition

Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values.

ShortSpecify preferred order of use (1 = highest)
Comments

Note that rank does not necessarily follow the order in which the contacts are represented in the instance.

Control0..1
TypepositiveInt
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. ContactPoint.period
Definition

Time period when the contact point was/is in use.

ShortTime period when the contact point was/is in use
Control0..1
TypePeriod
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. ContactPoint.period.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
26. ContactPoint.period.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on ContactPoint.period.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
28. ContactPoint.period.start
Definition

The start of the period. The boundary is inclusive.

ShortStarting time with inclusive boundary
Comments

If the low element is missing, the meaning is that the low boundary is not known.

Control0..1
This element is affected by the following invariants: per-1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. ContactPoint.period.end
Definition

The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.

ShortEnd time with inclusive boundary, if not ongoing
Comments

The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.

Control0..1
This element is affected by the following invariants: per-1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Meaning if MissingIf the end of the period is missing, it means that the period is ongoing
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))