Left: | Dosage (MedicationRequest) (http://fhir.ch/ig/ch-emed-epr/StructureDefinition/ch-emed-epr-dosage-medicationrequest) |
Right: | Dosage (MedicationRequest) (http://fhir.ch/ig/ch-emed-epr/StructureDefinition/ch-emed-epr-dosage-medicationrequest) |
Error | StructureDefinition.version | Values for version differ: '1.0.0' vs '2.0.0' |
Information | StructureDefinition.date | Values for date differ: '2024-01-26T09:51:05+01:00' vs '2025-01-21T10:58:28+00:00' |
Information | StructureDefinition.short | Values for short differ: '✕ This element is not supported' vs 'Narrative representation of the full dosage (including split dosage elements if they exist) information. SHOULD be provided.' |
Information | StructureDefinition.definition | Values for definition differ: 'Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.' vs 'Narrative representation of the full dosage information, including any split dosage elements if they exist. The aim is to provide the whole content of the dosage (whether structured or not) in a human readable fashion.' |
Warning | Dosage.text | Elements differ in definition for mustSupport: 'false' vs 'true' |
Information | StructureDefinition.comment | Values for comment differ: 'Information about administration or preparation of the medication (e.g. 'infuse as rapidly as possibly via intraperitoneal port' or 'immediately following drug x') should be populated in dosage.text.' vs 'Any information provided in additionalInstruction SHALL be present in both Dosage.text and Dosage.patientInstruction.' |
Information | StructureDefinition.definition | Values for definition differ: 'Instructions in terms that are understood by the patient or consumer.' vs 'Dosage information as free text in terms that are understood by the patient or consumer. Any information that cannot be provided in a structured way, other than in Dosage.additionalInstruction, SHALL be provided here and, OPTIONALLY, coded in additionalInstruction.' |
Error | Dosage.route | Unable to resolve left value set http://fhir.ch/ig/ch-emed/ValueSet/edqm-routeofadministration at Dosage.route |
Information | Dosage.method.coding | Element minimum cardinalities differ: '0' vs '1' |
Information | Dosage.doseAndRate | Element minimum cardinalities differ: '1' vs '0' |
Error | Dosage.doseAndRate.dose[x] | Type Mismatch: Range([CanonicalType[http://fhir.ch/ig/ch-emed/StructureDefinition/ch-emed-range]]), Quantity([CanonicalType[http://fhir.ch/ig/ch-emed/StructureDefinition/ch-emed-quantity]]) vs Range([CanonicalType[http://fhir.ch/ig/ch-core/StructureDefinition/ch-core-range-with-emed-units]]), Quantity([CanonicalType[http://fhir.ch/ig/ch-core/StructureDefinition/ch-core-quantity-with-emed-units]]) |
Information | StructureDefinition.short | Values for short differ: 'A ratio of two Quantity values - a numerator and a denominator' vs 'Amount of medication per unit of time' |
Information | StructureDefinition.definition | Values for definition differ: 'A relationship of two Quantity values - expressed as a numerator and a denominator.' vs 'Amount of medication per unit of time.' |
Information | StructureDefinition.comment | Values for comment differ: 'The Ratio datatype should only be used to express a relationship of two numbers if the relationship cannot be suitably expressed using a Quantity and a common unit. Where the denominator value is known to be fixed to '1', Quantity should be used instead of Ratio.' vs 'It is possible to supply both a rate and a doseQuantity to provide full details about how the medication is to be administered and supplied. If the rate is intended to change over time, depending on local rules/regulations, each change should be captured as a new version of the MedicationRequest with an updated rate, or captured with a new MedicationRequest with the new rate. It is possible to specify a rate over time (for example, 100 ml/hour) using either the rateRatio and rateQuantity. The rateQuantity approach requires systems to have the capability to parse UCUM grammer where ml/hour is included rather than a specific ratio where the time is specified as the denominator. Where a rate such as 500ml over 2 hours is specified, the use of rateRatio may be more semantically correct than specifying using a rateQuantity of 250 mg/hour.' |
Error | Dosage.doseAndRate.rate[x] | Type Mismatch: Ratio([CanonicalType[http://fhir.ch/ig/ch-emed-epr/StructureDefinition/ch-emed-epr-ratio-amount-per-time]]) vs Ratio([CanonicalType[http://fhir.ch/ig/ch-emed-epr/StructureDefinition/ch-emed-epr-ratio-amount-per-time]]) |
Information | StructureDefinition.short | Values for short differ: 'A ratio of two Quantity values - a numerator and a denominator' vs 'Upper limit on medication per unit of time' |
Information | StructureDefinition.definition | Values for definition differ: 'A relationship of two Quantity values - expressed as a numerator and a denominator.' vs 'Upper limit on medication per unit of time.' |
Information | StructureDefinition.comment | Values for comment differ: 'The Ratio datatype should only be used to express a relationship of two numbers if the relationship cannot be suitably expressed using a Quantity and a common unit. Where the denominator value is known to be fixed to '1', Quantity should be used instead of Ratio.' vs 'This is intended for use as an adjunct to the dosage when there is an upper cap. For example '2 tablets every 4 hours to a maximum of 8/day'.' |
Error | Dosage.maxDosePerPeriod | Type Mismatch: Ratio([CanonicalType[http://fhir.ch/ig/ch-emed-epr/StructureDefinition/ch-emed-epr-ratio-amount-per-time]]) vs Ratio([CanonicalType[http://fhir.ch/ig/ch-emed-epr/StructureDefinition/ch-emed-epr-ratio-amount-per-time]]) |
Information | StructureDefinition.short | Values for short differ: 'A fixed quantity (no comparator)' vs 'Upper limit on medication per administration' |
Information | StructureDefinition.definition | Values for definition differ: 'The comparator is not used on a SimpleQuantity' vs 'Upper limit on medication per administration.' |
Information | StructureDefinition.comment | Values for comment differ: 'The context of use may frequently define what kind of quantity this is and therefore what kind of units can be used. The context of use may also restrict the values for the comparator.' vs 'This is intended for use as an adjunct to the dosage when there is an upper cap. For example, a body surface area related dose with a maximum amount, such as 1.5 mg/m2 (maximum 2 mg) IV over 5 – 10 minutes would have doseQuantity of 1.5 mg/m2 and maxDosePerAdministration of 2 mg.' |
Error | Dosage.maxDosePerAdministration | Type Mismatch: Quantity([CanonicalType[http://fhir.ch/ig/ch-emed-epr/StructureDefinition/ch-emed-epr-amount-quantity]]) vs Quantity([CanonicalType[http://fhir.ch/ig/ch-emed-epr/StructureDefinition/ch-emed-epr-amount-quantity]]) |
Error | Dosage.maxDosePerLifetime | Type Mismatch: Quantity([CanonicalType[http://fhir.ch/ig/ch-emed-epr/StructureDefinition/ch-emed-epr-amount-quantity]]) vs Quantity([CanonicalType[http://fhir.ch/ig/ch-emed-epr/StructureDefinition/ch-emed-epr-amount-quantity]]) |
Name | Value | Comments | |
---|---|---|---|
![]() | false | ||
![]() | http://fhir.ch/ig/ch-emed/StructureDefinition/ch-emed-dosage-medicationrequest | ||
![]() | CC0-1.0 | ||
![]() | 2024-01-26T09:51:05+01:00 | 2025-01-21T10:58:28+00:00 |
|
![]() | Definition of the main dosage element (used in MedicationRequest) | ||
![]() | |||
![]() | 4.0.1 | ||
![]() | |||
![]() ![]() | urn:iso:std:iso:3166#CH | ||
![]() | complex-type | ||
![]() | CHEMEDEPRDosageMedicationRequest | ||
![]() | CARA | ||
![]() | |||
![]() | draft | ||
![]() | Dosage (MedicationRequest) | ||
![]() | Dosage | ||
![]() | http://fhir.ch/ig/ch-emed-epr/StructureDefinition/ch-emed-epr-dosage-medicationrequest | ||
![]() | 1.0.0 | 2.0.0 |
|
Name | L Flags | L Card. | L Type | L Description & Constraints | R Flags | R Card. | R Type | R Description & Constraints | Comments![]() |
---|---|---|---|---|---|---|---|---|---|
![]() ![]() | C | 0..* | CH EMED Dosage (MedicationRequest) ch-dosage-4: For split dosage timing event and dose/rate are required ch-dosage-3: Patient instruction/free text dosage instruction, timing or as needed has to be specified | C | 0..* | CHEMEDDosageMedicationRequest | CH EMED Dosage (MedicationRequest) ch-dosage-4: For split dosage timing event and dose/rate are required ch-dosage-3: Patient instruction/free text dosage instruction, or timing and dose/rate has to be specified base-dosage-text: It is a strong recommendation that the base dosage should contain the whole dosage information as narrative, including the information from split dosage elements. | ||
![]() ![]() ![]() | 0..1 | string | Unique id for inter-element referencing | 0..1 | string | Unique id for inter-element referencing | |||
![]() ![]() ![]() | 0..* | Extension | ✕ This element is not supported Slice: Unordered, Open by value:url | D | 0..* | Extension | ✕ This element is not supported Slice: Unordered, Open by value:url | ||
![]() ![]() ![]() | ?!Σ | 0..0 | ?!Σ | 0..0 | |||||
![]() ![]() ![]() | ΣC | 0..1 | integer | The order of the dosage instructions ch-dosage-1: No sequence number (for one dosage element) or sequence number = 1 (for more than one dosage element) | ΣC | 0..1 | integer | The order of the dosage instructions ch-dosage-1: No sequence number (for one dosage element) or sequence number = 1 (for more than one dosage element) | |
![]() ![]() ![]() | Σ | 0..1 | string | ✕ This element is not supported | SΣD | 0..1 | string | Narrative representation of the full dosage (including split dosage elements if they exist) information. SHOULD be provided. |
|
![]() ![]() ![]() | Σ | 0..* | CodeableConcept | Supplemental instruction or warnings to the patient - e.g. "with meals", "may cause drowsiness" Binding: ?? (example): A coded concept identifying additional instructions such as "take with water" or "avoid operating heavy machinery". | Σ | 0..* | CodeableConcept | Supplemental instruction or warnings to the patient - e.g. "with meals", "may cause drowsiness" Binding: ?? (example): A coded concept identifying additional instructions such as "take with water" or "avoid operating heavy machinery". | |
![]() ![]() ![]() ![]() | 0..1 | string | Unique id for inter-element referencing | 0..1 | string | Unique id for inter-element referencing | |||
![]() ![]() ![]() ![]() | 0..* | Extension | ✕ This element is not supported Slice: Unordered, Open by value:url | D | 0..* | Extension | ✕ This element is not supported Slice: Unordered, Open by value:url | ||
![]() ![]() ![]() ![]() | Σ | 0..* | Coding | Code defined by a terminology system | Σ | 0..* | Coding | Code defined by a terminology system | |
![]() ![]() ![]() ![]() | Σ | 1..1 | string | Plain text representation of the concept | Σ | 1..1 | string | Plain text representation of the concept | |
![]() ![]() ![]() | SΣ | 0..1 | string | Patient instructions (e.g. 'take with food'), incl. free text dosage instructions (e.g. for complex dosage) | SΣ | 0..1 | string | Patient instructions (e.g. 'take with food'), incl. free text dosage instructions (e.g. for complex dosage) | |
![]() ![]() ![]() | Σ | 0..1 | Timing | When medication should be administered | Σ | 0..1 | Timing | When medication should be administered | |
![]() ![]() ![]() ![]() | 0..1 | string | ✕ This element is not supported | D | 0..1 | string | ✕ This element is not supported | ||
![]() ![]() ![]() ![]() | 0..* | Extension | ✕ This element is not supported Slice: Unordered, Open by value:url | D | 0..* | Extension | ✕ This element is not supported Slice: Unordered, Open by value:url | ||
![]() ![]() ![]() ![]() | ?!Σ | 0..0 | ?!Σ | 0..0 | |||||
![]() ![]() ![]() ![]() | Σ | 0..* | dateTime | ✕ This element is not supported | ΣD | 0..* | dateTime | ✕ This element is not supported | |
![]() ![]() ![]() ![]() | ΣC | 0..1 | Element | When the event is to occur tim-1: if there's a duration, there needs to be duration units tim-2: if there's a period, there needs to be period units tim-4: duration SHALL be a non-negative value tim-5: period SHALL be a non-negative value tim-6: If there's a periodMax, there must be a period tim-7: If there's a durationMax, there must be a duration tim-8: If there's a countMax, there must be a count tim-9: If there's an offset, there must be a when (and not C, CM, CD, CV) tim-10: If there's a timeOfDay, there cannot be a when, or vice versa | ΣC | 0..1 | Element | When the event is to occur tim-1: if there's a duration, there needs to be duration units tim-2: if there's a period, there needs to be period units tim-4: duration SHALL be a non-negative value tim-5: period SHALL be a non-negative value tim-6: If there's a periodMax, there must be a period tim-7: If there's a durationMax, there must be a duration tim-8: If there's a countMax, there must be a count tim-9: If there's an offset, there must be a when (and not C, CM, CD, CV) tim-10: If there's a timeOfDay, there cannot be a when, or vice versa | |
![]() ![]() ![]() ![]() ![]() | 0..1 | string | ✕ This element is not supported | D | 0..1 | string | ✕ This element is not supported | ||
![]() ![]() ![]() ![]() ![]() | 0..* | Extension | ✕ This element is not supported Slice: Unordered, Open by value:url | D | 0..* | Extension | ✕ This element is not supported Slice: Unordered, Open by value:url | ||
![]() ![]() ![]() ![]() ![]() | Σ | 0..1 | Period | Length/Range of lengths, or (Start and/or end) limits Slice: Unordered, Closed by type:$this | Σ | 0..1 | Period | Length/Range of lengths, or (Start and/or end) limits Slice: Unordered, Closed by type:$this | |
![]() ![]() ![]() ![]() ![]() | Σ | 0..1 | positiveInt | ✕ This element is not supported | ΣD | 0..1 | positiveInt | ✕ This element is not supported | |
![]() ![]() ![]() ![]() ![]() | Σ | 0..1 | positiveInt | ✕ This element is not supported | ΣD | 0..1 | positiveInt | ✕ This element is not supported | |
![]() ![]() ![]() ![]() ![]() | Σ | 0..1 | decimal | ✕ This element is not supported | ΣD | 0..1 | decimal | ✕ This element is not supported | |
![]() ![]() ![]() ![]() ![]() | Σ | 0..1 | decimal | ✕ This element is not supported | ΣD | 0..1 | decimal | ✕ This element is not supported | |
![]() ![]() ![]() ![]() ![]() | Σ | 0..1 | code | ✕ This element is not supported Binding: ?? (required): A unit of time (units from UCUM). | ΣD | 0..1 | code | ✕ This element is not supported Binding: ?? (required): A unit of time (units from UCUM). | |
![]() ![]() ![]() ![]() ![]() | Σ | 0..1 | positiveInt | ✕ This element is not supported | ΣD | 0..1 | positiveInt | ✕ This element is not supported | |
![]() ![]() ![]() ![]() ![]() | Σ | 0..1 | positiveInt | ✕ This element is not supported | ΣD | 0..1 | positiveInt | ✕ This element is not supported | |
![]() ![]() ![]() ![]() ![]() | Σ | 0..1 | decimal | ✕ This element is not supported | ΣD | 0..1 | decimal | ✕ This element is not supported | |
![]() ![]() ![]() ![]() ![]() | Σ | 0..1 | decimal | ✕ This element is not supported | ΣD | 0..1 | decimal | ✕ This element is not supported | |
![]() ![]() ![]() ![]() ![]() | Σ | 0..1 | code | ✕ This element is not supported Binding: ?? (required): A unit of time (units from UCUM). | ΣD | 0..1 | code | ✕ This element is not supported Binding: ?? (required): A unit of time (units from UCUM). | |
![]() ![]() ![]() ![]() ![]() | Σ | 0..* | code | ✕ This element is not supported Binding: ?? (required) | ΣD | 0..* | code | ✕ This element is not supported Binding: ?? (required) | |
![]() ![]() ![]() ![]() ![]() | Σ | 0..* | time | ✕ This element is not supported | ΣD | 0..* | time | ✕ This element is not supported | |
![]() ![]() ![]() ![]() ![]() | SΣC | 0..* | code | ... It shall only contain values from Event Timings Binding: ?? (required): Real world event relating to the schedule. ch-emed-event-timing: For the representation of the time of administration according to the 1-1-1-1 scheme, the values MORN-NOON-EVE-NIGHT are highly recommended. only-standard-event-timings: The timing event shall only be 'MORN', 'NOON', 'EVE' or 'NIGHT'. | SΣC | 0..* | code | ... It shall only contain values from Event Timings Binding: ?? (required): Real world event relating to the schedule. ch-emed-event-timing: For the representation of the time of administration according to the 1-1-1-1 scheme, the values MORN-NOON-EVE-NIGHT are highly recommended. only-standard-event-timings: The timing event shall only be 'MORN', 'NOON', 'EVE' or 'NIGHT'. | |
![]() ![]() ![]() ![]() ![]() | Σ | 0..1 | unsignedInt | ✕ This element is not supported | ΣD | 0..1 | unsignedInt | ✕ This element is not supported | |
![]() ![]() ![]() ![]() | Σ | 0..1 | CodeableConcept | ✕ This element is not supported Binding: ?? (preferred): Code for a known / defined timing pattern. | ΣD | 0..1 | CodeableConcept | ✕ This element is not supported Binding: ?? (preferred): Code for a known / defined timing pattern. | |
![]() ![]() ![]() | Σ | 0..1 | boolean | Take "as needed" (for x) Slice: Unordered, Closed by type:$this | Σ | 0..1 | boolean | Take "as needed" (for x) Slice: Unordered, Closed by type:$this | |
![]() ![]() ![]() | Σ | 0..1 | CodeableConcept | ✕ This element is not supported Binding: ?? (example): A coded concept describing the site location the medicine enters into or onto the body. | ΣD | 0..1 | CodeableConcept | ✕ This element is not supported Binding: ?? (example): A coded concept describing the site location the medicine enters into or onto the body. | |
![]() ![]() ![]() ![]() | 0..1 | string | Unique id for inter-element referencing | 0..1 | string | Unique id for inter-element referencing | |||
![]() ![]() ![]() ![]() | 0..* | Extension | ✕ This element is not supported Slice: Unordered, Open by value:url | D | 0..* | Extension | ✕ This element is not supported Slice: Unordered, Open by value:url | ||
![]() ![]() ![]() ![]() | Σ | 0..* | Coding | Code defined by a terminology system | Σ | 0..* | Coding | Code defined by a terminology system | |
![]() ![]() ![]() ![]() | Σ | 1..1 | string | Plain text representation of the concept | Σ | 1..1 | string | Plain text representation of the concept | |
![]() ![]() ![]() | Σ | 0..1 | CodeableConcept | Route of administration Binding: ?? (required) | Σ | 0..1 | CodeableConcept | Route of administration Binding: ?? (required) |
|
![]() ![]() ![]() ![]() | 0..1 | string | Unique id for inter-element referencing | 0..1 | string | Unique id for inter-element referencing | |||
![]() ![]() ![]() ![]() | 0..* | Extension | ✕ This element is not supported Slice: Unordered, Open by value:url | D | 0..* | Extension | ✕ This element is not supported Slice: Unordered, Open by value:url | ||
![]() ![]() ![]() ![]() | SΣ | 1..* | Coding | Code defined by a terminology system | SΣ | 1..* | Coding | Code defined by a terminology system | |
![]() ![]() ![]() ![]() ![]() | 0..1 | string | Unique id for inter-element referencing | 0..1 | string | Unique id for inter-element referencing | |||
![]() ![]() ![]() ![]() ![]() | 0..* | Extension | Additional content defined by implementations Slice: Unordered, Open by value:url | 0..* | Extension | Additional content defined by implementations Slice: Unordered, Open by value:url | |||
![]() ![]() ![]() ![]() ![]() | Σ | 1..1 | uri | Identity of the terminology system | Σ | 1..1 | uri | Identity of the terminology system | |
![]() ![]() ![]() ![]() ![]() | Σ | 0..1 | string | Version of the system - if relevant | Σ | 0..1 | string | Version of the system - if relevant | |
![]() ![]() ![]() ![]() ![]() | Σ | 1..1 | code | Symbol in syntax defined by the system | Σ | 1..1 | code | Symbol in syntax defined by the system | |
![]() ![]() ![]() ![]() ![]() | Σ | 0..1 | string | Representation defined by the system | Σ | 0..1 | string | Representation defined by the system | |
![]() ![]() ![]() ![]() ![]() | Σ | 0..1 | boolean | If this coding was chosen directly by the user | Σ | 0..1 | boolean | If this coding was chosen directly by the user | |
![]() ![]() ![]() ![]() | Σ | 1..1 | string | Plain text representation of the concept | Σ | 1..1 | string | Plain text representation of the concept | |
![]() ![]() ![]() | Σ | 0..1 | CodeableConcept | ✕ This element is not supported Binding: ?? (example): A coded concept describing the technique by which the medicine is administered. | ΣD | 0..1 | CodeableConcept | ✕ This element is not supported Binding: ?? (required) | |
![]() ![]() ![]() ![]() | 0..1 | string | Unique id for inter-element referencing | 0..1 | string | Unique id for inter-element referencing | |||
![]() ![]() ![]() ![]() | 0..* | Extension | ✕ This element is not supported Slice: Unordered, Open by value:url | D | 0..* | Extension | ✕ This element is not supported Slice: Unordered, Open by value:url | ||
![]() ![]() ![]() ![]() | Σ | 0..* | Coding | Code defined by a terminology system | Σ | 1..* | Coding | Code defined by a terminology system |
|
![]() ![]() ![]() ![]() ![]() | 0..1 | string | Unique id for inter-element referencing |
| |||||
![]() ![]() ![]() ![]() ![]() | 0..* | Extension | Additional content defined by implementations Slice: Unordered, Open by value:url |
| |||||
![]() ![]() ![]() ![]() ![]() | Σ | 1..1 | uri | Identity of the terminology system |
| ||||
![]() ![]() ![]() ![]() ![]() | Σ | 0..1 | string | Version of the system - if relevant |
| ||||
![]() ![]() ![]() ![]() ![]() | Σ | 1..1 | code | Symbol in syntax defined by the system |
| ||||
![]() ![]() ![]() ![]() ![]() | Σ | 0..1 | string | Representation defined by the system |
| ||||
![]() ![]() ![]() ![]() ![]() | Σ | 0..1 | boolean | If this coding was chosen directly by the user |
| ||||
![]() ![]() ![]() ![]() | Σ | 1..1 | string | Plain text representation of the concept | Σ | 1..1 | string | Plain text representation of the concept | |
![]() ![]() ![]() | Σ | 1..1 | Element | Amount of medication administered | Σ | 0..1 | Element | Amount of medication administered |
|
![]() ![]() ![]() ![]() | 0..1 | string | Unique id for inter-element referencing | 0..1 | string | Unique id for inter-element referencing | |||
![]() ![]() ![]() ![]() | 0..* | Extension | Additional content defined by implementations Slice: Unordered, Open by value:url | 0..* | Extension | Additional content defined by implementations Slice: Unordered, Open by value:url | |||
![]() ![]() ![]() ![]() | Σ | 0..1 | CodeableConcept | ✕ This element is not supported Binding: ?? (example): The kind of dose or rate specified. | ΣD | 0..1 | CodeableConcept | ✕ This element is not supported Binding: ?? (example): The kind of dose or rate specified. | |
![]() ![]() ![]() ![]() | SΣ | 0..1 | ??, ?? | Amount of medication per dose Slice: Unordered, Closed by type:$this | SΣ | 0..1 | ??, ?? | Amount of medication per dose Slice: Unordered, Closed by type:$this |
|
![]() ![]() ![]() ![]() | C | 0..1 | ?? | A ratio of two Quantity values - a numerator and a denominator rat-1: Numerator and denominator SHALL both be present, or both are absent. If both are absent, there SHALL be some extension present | Σ | 0..1 | ?? | Amount of medication per unit of time |
|
![]() ![]() ![]() | C | 0..1 | ?? | A ratio of two Quantity values - a numerator and a denominator rat-1: Numerator and denominator SHALL both be present, or both are absent. If both are absent, there SHALL be some extension present | Σ | 0..1 | ?? | Upper limit on medication per unit of time |
|
![]() ![]() ![]() | C | 0..1 | ?? | A fixed quantity (no comparator) qty-3: If a code for the unit is present, the system SHALL also be present sqty-1: The comparator is not used on a SimpleQuantity | Σ | 0..1 | ?? | Upper limit on medication per administration |
|
![]() ![]() ![]() | C | 0..1 | ?? | ✕ This element is not supported qty-3: If a code for the unit is present, the system SHALL also be present sqty-1: The comparator is not used on a SimpleQuantity | ΣD | 0..1 | ?? | ✕ This element is not supported |
|
![]() |