CH Core (R4)
4.0.0-ballot - ballot
This page is part of the CH Core (R4) (v4.0.0-ballot: STU Ballot 1) based on FHIR R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions
Active as of 2023-06-27 |
Definitions for the ch-core-humanname data type profile.
Guidance on how to interpret the contents of this table can be found here.
1. HumanName | |
Invariants | Defined on this element ch-core-hm-1: if officalName with eCH-011 Extension is specified, it can only be put on a name where use attribute is official (: family.extension.where(url='http://fhir.ch/ig/ch-core/StructureDefinition/ch-ext-ech-11-name' and value='officialName').empty() or (family.extension.where(url='http://fhir.ch/ig/ch-core/StructureDefinition/ch-ext-ech-11-name' and value='officialName').exists() and use='official')) ch-core-hm-2: if orginalName with eCH-011 Extension is specified, it can only be put on a name where use attribute is maiden (: family.extension.where(url='http://fhir.ch/ig/ch-core/StructureDefinition/ch-ext-ech-11-name' and value='originalName').empty() or ((family.extension.where(url='http://fhir.ch/ig/ch-core/StructureDefinition/ch-ext-ech-11-name' and value='originalName').exists() and use='maiden'))) ch-core-hm-3: ch-ext-ech-11-name can only be put on a family name (: descendants().extension.where(url='http://fhir.ch/ig/ch-core/StructureDefinition/ch-ext-ech-11-name').count()=family.extension.where(url='http://fhir.ch/ig/ch-core/StructureDefinition/ch-ext-ech-11-name').count()) ch-core-hm-4: ch-ext-ech-11-firstname can only be put on a given name (: descendants().extension.where(url='http://fhir.ch/ig/ch-core/StructureDefinition/ch-ext-ech-11-firstname').count()=given.extension.where(url='http://fhir.ch/ig/ch-core/StructureDefinition/ch-ext-ech-11-firstname').count()) |
2. HumanName.family | |
3. HumanName.family.extension | |
Control | 0..? |
Slicing | This element introduces a set of slices on HumanName.family.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
4. HumanName.family.extension:ech11name | |
SliceName | ech11name |
Control | 0..1 |
Type | Extension(ECH011Name) (Extension Type: code) |
5. HumanName.given | |
6. HumanName.given.extension | |
Control | 0..? |
Slicing | This element introduces a set of slices on HumanName.given.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
7. HumanName.given.extension:ech11firstname | |
SliceName | ech11firstname |
Control | 0..1 |
Type | Extension(ECH011FirstName) (Extension Type: code) |
8. HumanName.prefix | |
9. HumanName.prefix.extension | |
Control | 0..? |
Slicing | This element introduces a set of slices on HumanName.prefix.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
10. HumanName.prefix.extension:salutationandtitle | |
SliceName | salutationandtitle |
Control | 0..* |
Type | Extension(EN-qualifier) (Extension Type: code) |
Guidance on how to interpret the contents of this table can be found here.
1. HumanName | |
Definition | A human's name with the ability to identify parts and usage. |
Control | 0..* This element is affected by the following invariants: ele-1 |
Comments | Names may be changed, or repudiated, or people may have different names in different contexts. Names may be divided into parts of different type that have variable significance depending on context, though the division into parts does not always matter. With personal names, the different parts might or might not be imbued with some implicit meaning; various cultures associate different importance with the name parts and the degree to which systems must care about name parts around the world varies widely. |
Invariants | Defined on this element ch-core-hm-1: if officalName with eCH-011 Extension is specified, it can only be put on a name where use attribute is official (: family.extension.where(url='http://fhir.ch/ig/ch-core/StructureDefinition/ch-ext-ech-11-name' and value='officialName').empty() or (family.extension.where(url='http://fhir.ch/ig/ch-core/StructureDefinition/ch-ext-ech-11-name' and value='officialName').exists() and use='official')) ch-core-hm-2: if orginalName with eCH-011 Extension is specified, it can only be put on a name where use attribute is maiden (: family.extension.where(url='http://fhir.ch/ig/ch-core/StructureDefinition/ch-ext-ech-11-name' and value='originalName').empty() or ((family.extension.where(url='http://fhir.ch/ig/ch-core/StructureDefinition/ch-ext-ech-11-name' and value='originalName').exists() and use='maiden'))) ch-core-hm-3: ch-ext-ech-11-name can only be put on a family name (: descendants().extension.where(url='http://fhir.ch/ig/ch-core/StructureDefinition/ch-ext-ech-11-name').count()=family.extension.where(url='http://fhir.ch/ig/ch-core/StructureDefinition/ch-ext-ech-11-name').count()) ch-core-hm-4: ch-ext-ech-11-firstname can only be put on a given name (: descendants().extension.where(url='http://fhir.ch/ig/ch-core/StructureDefinition/ch-ext-ech-11-firstname').count()=given.extension.where(url='http://fhir.ch/ig/ch-core/StructureDefinition/ch-ext-ech-11-firstname').count()) ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
2. HumanName.use | |
Definition | Identifies the purpose for this name. |
Control | 0..1 |
Binding | The codes SHALL be taken from NameUse The use of a human name. |
Type | code |
Is Modifier | true |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | Allows the appropriate name for a particular context of use to be selected from among a set of names. |
Comments | Applications can assume that a name is current unless it explicitly says that it is temporary or old. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
3. HumanName.family | |
Definition | The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father. |
Control | 0..1 |
Type | string |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Alternate Names | surname |
Comments | Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures). |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
4. HumanName.family.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..* |
Type | Extension |
Summary | false |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on HumanName.family.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
5. HumanName.family.extension:ech11name | |
SliceName | ech11name |
Definition | Extension for eCH-0011 - namedatatype |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | Extension(ECH011Name) (Extension Type: code) |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
6. HumanName.given | |
Definition | Given name. |
Control | 0..* |
Type | string |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Alternate Names | first name, middle name |
Comments | If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
7. HumanName.given.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..* |
Type | Extension |
Summary | false |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on HumanName.given.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
8. HumanName.given.extension:ech11firstname | |
SliceName | ech11firstname |
Definition | eCH-0011: Extension to define first name type |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | Extension(ECH011FirstName) (Extension Type: code) |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
9. HumanName.prefix | |
Definition | Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the start of the name. |
Control | 0..* |
Type | string |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
10. HumanName.prefix.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..* |
Type | Extension |
Summary | false |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on HumanName.prefix.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
11. HumanName.prefix.extension:salutationandtitle | |
SliceName | salutationandtitle |
Definition | A set of codes each of which specifies a certain subcategory of the name part in addition to the main name part type. |
Control | 0..* This element is affected by the following invariants: ele-1 |
Type | Extension(EN-qualifier) (Extension Type: code) |
Comments | Used to indicate additional information about the name part and how it should be used. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Guidance on how to interpret the contents of this table can be found here.
1. HumanName | |
Definition | A human's name with the ability to identify parts and usage. |
Control | 0..* This element is affected by the following invariants: ele-1 |
Comments | Names may be changed, or repudiated, or people may have different names in different contexts. Names may be divided into parts of different type that have variable significance depending on context, though the division into parts does not always matter. With personal names, the different parts might or might not be imbued with some implicit meaning; various cultures associate different importance with the name parts and the degree to which systems must care about name parts around the world varies widely. |
2. HumanName.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
Summary | false |
3. HumanName.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..* |
Type | Extension |
Summary | false |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on HumanName.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
4. HumanName.use | |
Definition | Identifies the purpose for this name. |
Control | 0..1 |
Binding | The codes SHALL be taken from NameUse The use of a human name |
Type | code |
Is Modifier | true |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | Allows the appropriate name for a particular context of use to be selected from among a set of names. |
Comments | Applications can assume that a name is current unless it explicitly says that it is temporary or old. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
5. HumanName.text | |
Definition | Specifies the entire name as it should be displayed e.g. on an application UI. This may be provided instead of or as well as the specific parts. |
Control | 0..1 |
Type | string |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | A renderable, unencoded form. |
Comments | Can provide both a text representation and parts. Applications updating a name SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
6. HumanName.family | |
Definition | The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father. |
Control | 0..1 |
Type | string |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Alternate Names | surname |
Comments | Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures). |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
7. HumanName.family.id | |
Definition | unique id for the element within a resource (for internal references) |
Control | 0..1 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
Summary | false |
8. HumanName.family.extension | |
Definition | An Extension |
Control | 0..* |
Type | Extension |
Summary | false |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on HumanName.family.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
9. HumanName.family.extension:ech11name | |
SliceName | ech11name |
Definition | Extension for eCH-0011 - namedatatype |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | Extension(ECH011Name) (Extension Type: code) |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
10. HumanName.family.value | |
Definition | The actual value |
Control | 0..1 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
Summary | false |
Max Length | 1048576 |
11. HumanName.given | |
Definition | Given name. |
Control | 0..* |
Type | string |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Alternate Names | first name, middle name |
Comments | If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
12. HumanName.given.id | |
Definition | unique id for the element within a resource (for internal references) |
Control | 0..1 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
Summary | false |
13. HumanName.given.extension | |
Definition | An Extension |
Control | 0..* |
Type | Extension |
Summary | false |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on HumanName.given.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
14. HumanName.given.extension:ech11firstname | |
SliceName | ech11firstname |
Definition | eCH-0011: Extension to define first name type |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | Extension(ECH011FirstName) (Extension Type: code) |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
15. HumanName.given.value | |
Definition | The actual value |
Control | 0..1 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
Summary | false |
Max Length | 1048576 |
16. HumanName.prefix | |
Definition | Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the start of the name. |
Control | 0..* |
Type | string |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
17. HumanName.prefix.id | |
Definition | unique id for the element within a resource (for internal references) |
Control | 0..1 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
Summary | false |
18. HumanName.prefix.extension | |
Definition | An Extension |
Control | 0..* |
Type | Extension |
Summary | false |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on HumanName.prefix.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
19. HumanName.prefix.extension:salutationandtitle | |
SliceName | salutationandtitle |
Definition | A set of codes each of which specifies a certain subcategory of the name part in addition to the main name part type. |
Control | 0..* This element is affected by the following invariants: ele-1 |
Type | Extension(EN-qualifier) (Extension Type: code) |
Comments | Used to indicate additional information about the name part and how it should be used. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
20. HumanName.prefix.value | |
Definition | The actual value |
Control | 0..1 |
Type | string |
XML Representation | In the XML format, this property is represented as an attribute. |
Summary | false |
Max Length | 1048576 |
21. HumanName.suffix | |
Definition | Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the end of the name. |
Control | 0..* |
Type | string |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
22. HumanName.period | |
Definition | Indicates the period of time when this name was valid for the named person. |
Control | 0..1 |
Type | Period |
Summary | true |
Requirements | Allows names to be placed in historical context. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |