CH LAB-Order (R4)
2.0.0 - trial-use Switzerland flag

This page is part of the CH LAB-Order (R4) (v2.0.0: STU 2) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions

Resource Profile: ChLabOrderCompositionWithSR_AndForm - Detailed Descriptions

Active as of 2019-01-30

Definitions for the ch-lab-order-composition-with-sr-and-form resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Composition
ShortCH LAB-Order Composition with ServiceRequest and Form
2. Composition.type
BindingThe codes SHALL be taken from DocumentEntry.typeCode
(required to http://fhir.ch/ig/ch-epr-term/ValueSet/DocumentEntry.typeCode)
4. Composition.category
ShortOrder Document
BindingThe codes SHALL be taken from DocumentEntry.classCode
(required to http://fhir.ch/ig/ch-epr-term/ValueSet/DocumentEntry.classCode)
6. Composition.section:orderReferral
Slice NameorderReferral
8. Composition.section:orderReferral.entry
Control3..?
10. Composition.section:orderReferral.entry:Questionnaire
Slice NameQuestionnaire
Control1..?
12. Composition.section:orderReferral.entry:QuestionnaireResponse
Slice NameQuestionnaireResponse
Control1..?

Guidance on how to interpret the contents of this table can be found here

0. Composition
Definition

A set of healthcare-related information that is assembled together into a single logical package that provides a single coherent statement of meaning, establishes its own context and that has clinical attestation with regard to who is making the statement. A Composition defines the structure and narrative content necessary for a document. However, a Composition alone does not constitute a document. Rather, the Composition must be the first entry in a Bundle where Bundle.type=document, and any other resources referenced from Composition must be included as subsequent entries in the Bundle (for example Patient, Practitioner, Encounter, etc.).

ShortCH LAB-Order Composition with ServiceRequest and FormA set of resources composed into a single coherent clinical statement with clinical attestation
Comments

While the focus of this specification is on patient-specific clinical statements, this resource can also apply to other healthcare-related statements such as study protocol designs, healthcare invoices and other activities that are not necessarily patient-specific or clinical.

Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Composition.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Composition.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

ShortNarrative text of the compositionText summary of the resource, for human interpretation
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Control10..1
TypeNarrative
Is Modifierfalse
Must Supporttrue
Summaryfalse
Alternate Namesnarrative, html, xhtml, display
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Composition.extension:dataEnterer
Slice NamedataEnterer
Definition

Extension to define the information about the person and organization that entered data and the time of the data input

ShortThe person/organization who has typed/filled in the form content
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(EPR Data Enterer) (Complex Extension)
Is Modifierfalse
Must Supporttrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
8. Composition.extension:urgentNoficationContactForThisDocument
Slice NameurgentNoficationContactForThisDocument
Definition

An information recipient to notify for urgent matters (e.g. in a radiology service, the radiologist has to be called by phone right away at the time the doucment is received).

ShortAn information recipient to notify for urgent matters
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(CH ORF Urgent Notification Contact For This Documet) (Extension Type: Reference)
Is Modifierfalse
Must Supporttrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
10. Composition.extension:urgentNoficationContactForTheResponseToThisDocument
Slice NameurgentNoficationContactForTheResponseToThisDocument
Definition

An information recipient to notify for urgent matters about the response. (e.g. in a clinical setting, the referring doctor has to be called by phone right away at the time the images and reports arrive. The Urgent Notification Contact for the Response can be specified already in the request. At the time the response is written, this element shall be populated to the Urgent Notification Contact element in the response.)

ShortAn information recipient to notify for urgent matters about the response
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(CH ORF Urgent Notification Contact For The Response To This Document) (Extension Type: Reference)
Is Modifierfalse
Must Supporttrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
12. Composition.extension:receiver
Slice Namereceiver
Definition

Person/organization who receives the document

ShortPerson/organization who receives the document
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(CH ORF Receiver) (Extension Type: Reference)
Is Modifierfalse
Must Supporttrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
14. Composition.extension:copyReceiver
Slice NamecopyReceiver
Definition

Receiver of the copy of this order and the results therefrom

ShortPerson/organization who receives the copy of this order (shall receive also all results therefrom)
Control0..*
This element is affected by the following invariants: ele-1
TypeExtension(CH ORF Copy Receiver) (Extension Type: Reference)
Is Modifierfalse
Must Supporttrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
16. Composition.extension:precedentDocument
Slice NameprecedentDocument
Definition

Identifier of the document which precedes this document in a thread.

ShortIdentifier of the document which precedes this document in a thread.
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(CH ORF Precedent Document) (Extension Type: Identifier)
Is Modifierfalse
Must Supporttrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. Composition.extension:antecedentEpisodeOfCare
Slice NameantecedentEpisodeOfCare
Definition

Documentation of the antecedent episode of care e.g hospitalisation in case of care transfer between instituitons e.g. hospitals, rehab. clinics, retirement homes etc.

ShortDocumentation of the antecedent episode of care e.g hospitalisation in case of care transfer between instituitons e.g. hospitals, rehab. clinics, retirement homes etc.
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(CH ORF Episode of Care) (Extension Type: Reference)
Is Modifierfalse
Must Supporttrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
20. Composition.extension:initiator
Slice Nameinitiator
Definition

Extension to define person/organization who initated this order (may or may not receive a copy)

ShortProfile to specify who intiated this order; in particulars for spitex and transfer to retirement home etc.
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(CH ORF Initiator) (Complex Extension)
Is Modifierfalse
Must Supporttrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
22. Composition.extension:patientConsent
Slice NamepatientConsent
Definition

Patient Consent to this Order

ShortTo specify if the patient gave an informed consent to this order; in particulars for spitex and transfer to retirement home etc.
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(CH ORF Patient Consent) (Extension Type: Reference)
Is Modifierfalse
Must Supporttrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
24. Composition.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
26. Composition.status
Definition

The workflow/clinical status of this composition. The status is a marker for the clinical standing of the document.

Shortpreliminary | final | amended | entered-in-error
Comments

If a composition is marked as withdrawn, the compositions/documents in the series, or data from the composition or document series, should never be displayed to a user without being clearly marked as untrustworthy. The flag "entered-in-error" is why this element is labeled as a modifier of other elements.

Some reporting work flows require that the original narrative of a final document never be altered; instead, only new narrative can be added. The composition resource has no explicit status for explicitly noting whether this business rule is in effect. This would be handled by an extension if required.

Control1..1
BindingThe codes SHALL be taken from CompositionStatushttp://hl7.org/fhir/ValueSet/composition-status|4.0.1
(required to http://hl7.org/fhir/ValueSet/composition-status|4.0.1)

The workflow/clinical status of the composition.

Typecode
Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Need to be able to mark interim, amended, or withdrawn compositions or documents.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. Composition.type
Definition

Specifies the particular kind of composition (e.g. History and Physical, Discharge Summary, Progress Note). This usually equates to the purpose of making the composition.

ShortPrecise type of clinical documentKind of composition (LOINC if possible)
Comments

For Composition type, LOINC is ubiquitous and strongly endorsed by HL7. Most implementation guides will require a specific LOINC code, or use LOINC as an extensible binding.

Control1..1
BindingThe codes SHALL be taken from The codes SHOULD be taken from DocumentEntry.typeCodehttp://hl7.org/fhir/ValueSet/doc-typecodes
(required to http://fhir.ch/ig/ch-epr-term/ValueSet/DocumentEntry.typeCode)
TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Key metadata element describing the composition, used in searching/filtering.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. Composition.category
Definition

A categorization for the type of the composition - helps for indexing and searching. This may be implied by or derived from the code specified in the Composition Type.

ShortOrder DocumentCategorization of Composition
Comments

This is a metadata field from XDS/MHD.

Control10..1*
BindingThe codes SHALL be taken from For example codes, see DocumentEntry.classCodehttp://hl7.org/fhir/ValueSet/document-classcodes
(required to http://fhir.ch/ig/ch-epr-term/ValueSet/DocumentEntry.classCode)
TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Helps humans to assess whether the composition is of interest when viewing an index of compositions or documents.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. Composition.subject
Definition

Who or what the composition is about. The composition can be about a person, (patient or healthcare practitioner), a device (e.g. a machine) or even a group of subjects (such as a document about a herd of livestock, or a set of patients that share a common exposure).

ShortPatient as the principle target of a particular form contentWho and/or what the composition is about
Comments

For clinical documents, this is usually the patient.

Control10..1
TypeReference(CH Core Patient, Resource)
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Essential metadata for searching for the composition. Identifies who and/or what the composition/document is about.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. Composition.subject.reference
Definition

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

ShortLiteral reference, Relative, internal or absolute URL
Comments

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

Control10..1
This element is affected by the following invariants: ref-1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. Composition.date
Definition

The composition editing time, when the composition was last logically changed by the author.

ShortComposition editing time
Comments

The Last Modified Date on the composition may be after the date of the document was attested without being changed.

Control1..1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

dateTime is used for tracking, organizing versions and searching. Note that this is the time of authoring. When packaged in a document, Bundle.timestamp is the date of packaging.


dateTime is used for tracking, organizing versions and searching. Note that this is the time of authoring. When packaged in a document, Bundle.timestamp is the date of packaging.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. Composition.author
Definition

Identifies who is responsible for the information in the composition, not necessarily who typed it in.

ShortThe person/organization responsible for the form contentWho and/or what authored the composition
Control1..1*
TypeReference(CH Core PractitionerRole, Practitioner, PractitionerRole, Device, Patient, RelatedPerson, Organization)
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Identifies who is responsible for the content.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. Composition.author.reference
Definition

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

ShortLiteral reference, Relative, internal or absolute URL
Comments

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

Control10..1
This element is affected by the following invariants: ref-1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. Composition.title
Definition

Official human-readable label for the composition.

ShortMeaningful titleHuman Readable name/title
Comments

For many compositions, the title is the same as the text or a display name of Composition.type (e.g. a "consultation" or "progress note"). Note that CDA does not make title mandatory, but there are no known cases where it is useful for title to be omitted, so it is mandatory here. Feedback on this requirement is welcome during the trial use period.

Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
44. Composition.section
Definition

The root of the sections that make up the composition.

ShortComposition is broken into sections
Control10..*
TypeBackboneElement
Is Modifierfalse
Must Supporttrue
Summaryfalse
Invariantscmp-1: A section must contain at least one of text, entries, or sub-sections (text.exists() or entry.exists() or section.exists())
cmp-2: A section can only have an emptyReason if it is empty (emptyReason.empty() or entry.empty())
ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
cmp-1: A section must contain at least one of text, entries, or sub-sections (text.exists() or entry.exists() or section.exists())
cmp-2: A section can only have an emptyReason if it is empty (emptyReason.empty() or entry.empty())
SlicingThis element introduces a set of slices on Composition.section. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • pattern @ code
  • 46. Composition.section.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    48. Composition.section:orderReferral
    Slice NameorderReferral
    Definition

    The root of the sections that make up the composition.

    ShortContains the data that supports the order and referral by form.Composition is broken into sections
    Control10..1*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantscmp-1: A section must contain at least one of text, entries, or sub-sections (text.exists() or entry.exists() or section.exists())
    cmp-2: A section can only have an emptyReason if it is empty (emptyReason.empty() or entry.empty())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    cmp-1: A section must contain at least one of text, entries, or sub-sections (text.exists() or entry.exists() or section.exists())
    cmp-2: A section can only have an emptyReason if it is empty (emptyReason.empty() or entry.empty())
    50. Composition.section:orderReferral.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    52. Composition.section:orderReferral.title
    Definition

    The label for this particular section. This will be part of the rendered content for the document, and is often used to build a table of contents.

    ShortOrder-ReferralLabel for section (e.g. for ToC)
    Comments

    The title identifies the section for a human reader. The title must be consistent with the narrative of the resource that is the target of the section.content reference. Generally, sections SHOULD have titles, but in some documents, it is unnecessary or inappropriate. Typically, this is where a section has subsections that have their own adequately distinguishing title, or documents that only have a single section. Most Implementation Guides will make section title to be a required element.

    Control10..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    Requirements

    Section headings are often standardized for different types of documents. They give guidance to humans on how the document is organized.

    Alternate Namesheader, label, caption
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    54. Composition.section:orderReferral.code
    Definition

    A code identifying the kind of content contained within the section. This must be consistent with the section title.

    ShortClassification of section (recommended)
    Comments

    The code identifies the section for an automated processor of the document. This is particularly relevant when using profiles to control the structure of the document.

    If the section has content (instead of sub-sections), the section.code does not change the meaning or interpretation of the resource that is the content of the section in the comments for the section.code.

    Control10..1
    BindingFor example codes, see DocumentSectionCodeshttp://hl7.org/fhir/ValueSet/doc-section-codes
    (example to http://hl7.org/fhir/ValueSet/doc-section-codes)

    Classification of a section of a composition/document.

    TypeCodeableConcept
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    Provides computable standardized labels to topics within the document.

    Pattern Value{
      "coding" : [{
        "system" : "http://loinc.org",
        "code" : "93037-0"
      }]
    }
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    56. Composition.section:orderReferral.text
    Definition

    A human-readable narrative that contains the attested content of the section, used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative.

    ShortText summary of the section, for human interpretation
    Comments

    Document profiles may define what content should be represented in the narrative to ensure clinical safety.

    Control0..1
    This element is affected by the following invariants: cmp-1
    TypeNarrative
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    58. Composition.section:orderReferral.entry
    Definition

    A reference to the actual resource from which the narrative in the section is derived.

    ShortA reference to data that supports this section
    Comments

    If there are no entries in the list, an emptyReason SHOULD be provided.

    Control30..*
    This element is affected by the following invariants: cmp-2
    TypeReference(Resource)
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    SlicingThis element introduces a set of slices on Composition.section.entry. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • profile @ resolve()
    • 60. Composition.section:orderReferral.entry:Questionnaire
      Slice NameQuestionnaire
      Definition

      A reference to the actual resource from which the narrative in the section is derived.

      ShortQuestionnaireA reference to data that supports this section
      Comments

      If there are no entries in the list, an emptyReason SHOULD be provided.

      Control10..1*
      This element is affected by the following invariants: cmp-2
      TypeReference(CH ORF Questionnaire, Resource)
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      62. Composition.section:orderReferral.entry:Questionnaire.reference
      Definition

      A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

      ShortLiteral reference, Relative, internal or absolute URL
      Comments

      Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

      Control10..1
      This element is affected by the following invariants: ref-1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      64. Composition.section:orderReferral.entry:QuestionnaireResponse
      Slice NameQuestionnaireResponse
      Definition

      A reference to the actual resource from which the narrative in the section is derived.

      ShortQuestionnaireResponseA reference to data that supports this section
      Comments

      If there are no entries in the list, an emptyReason SHOULD be provided.

      Control10..1*
      This element is affected by the following invariants: cmp-2
      TypeReference(CH ORF QuestionnaireResponse, Resource)
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      66. Composition.section:orderReferral.entry:QuestionnaireResponse.reference
      Definition

      A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

      ShortLiteral reference, Relative, internal or absolute URL
      Comments

      Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

      Control10..1
      This element is affected by the following invariants: ref-1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      68. Composition.section:orderReferral.entry:ServiceRequest
      Slice NameServiceRequest
      Definition

      A reference to the actual resource from which the narrative in the section is derived.

      ShortServiceRequestA reference to data that supports this section
      Comments

      If there are no entries in the list, an emptyReason SHOULD be provided.

      Control10..*
      This element is affected by the following invariants: cmp-2
      TypeReference(CH ORF ServiceRequest, Resource)
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      70. Composition.section:orderReferral.entry:ServiceRequest.reference
      Definition

      A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

      ShortLiteral reference, Relative, internal or absolute URL
      Comments

      Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

      Control10..1
      This element is affected by the following invariants: ref-1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      72. Composition.section:orderReferral.entry:DocumentReference
      Slice NameDocumentReference
      Definition

      A reference to the actual resource from which the narrative in the section is derived.

      ShortDocumentReferenceA reference to data that supports this section
      Comments

      If there are no entries in the list, an emptyReason SHOULD be provided.

      Control0..*
      This element is affected by the following invariants: cmp-2
      TypeReference(CH ORF DocumentReference, Resource)
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      74. Composition.section:orderReferral.entry:DocumentReference.reference
      Definition

      A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

      ShortLiteral reference, Relative, internal or absolute URL
      Comments

      Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

      Control10..1
      This element is affected by the following invariants: ref-1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      76. Composition.section:orderReferral.section
      Definition

      A nested sub-section within this section.

      ShortNested Section
      Comments

      Nested sections are primarily used to help human readers navigate to particular portions of the document.

      Control0..0*
      This element is affected by the following invariants: cmp-1
      TypeSeettp://hl7.org/fhir/StructureDefinition/Composition#Composition.section
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      78. Composition.section:originalRepresentation
      Slice NameoriginalRepresentation
      Definition

      The root of the sections that make up the composition.

      ShortContains the original representation as a PDF of the current document.Composition is broken into sections
      Control0..1*
      TypeBackboneElement
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantscmp-1: A section must contain at least one of text, entries, or sub-sections (text.exists() or entry.exists() or section.exists())
      cmp-2: A section can only have an emptyReason if it is empty (emptyReason.empty() or entry.empty())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      cmp-1: A section must contain at least one of text, entries, or sub-sections (text.exists() or entry.exists() or section.exists())
      cmp-2: A section can only have an emptyReason if it is empty (emptyReason.empty() or entry.empty())
      80. Composition.section:originalRepresentation.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      82. Composition.section:originalRepresentation.title
      Definition

      The label for this particular section. This will be part of the rendered content for the document, and is often used to build a table of contents.

      ShortOriginal representationLabel for section (e.g. for ToC)
      Comments

      The title identifies the section for a human reader. The title must be consistent with the narrative of the resource that is the target of the section.content reference. Generally, sections SHOULD have titles, but in some documents, it is unnecessary or inappropriate. Typically, this is where a section has subsections that have their own adequately distinguishing title, or documents that only have a single section. Most Implementation Guides will make section title to be a required element.

      Control10..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summaryfalse
      Requirements

      Section headings are often standardized for different types of documents. They give guidance to humans on how the document is organized.

      Alternate Namesheader, label, caption
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      84. Composition.section:originalRepresentation.code
      Definition

      A code identifying the kind of content contained within the section. This must be consistent with the section title.

      ShortClassification of section (recommended)
      Comments

      The code identifies the section for an automated processor of the document. This is particularly relevant when using profiles to control the structure of the document.

      If the section has content (instead of sub-sections), the section.code does not change the meaning or interpretation of the resource that is the content of the section in the comments for the section.code.

      Control10..1
      BindingFor example codes, see DocumentSectionCodeshttp://hl7.org/fhir/ValueSet/doc-section-codes
      (example to http://hl7.org/fhir/ValueSet/doc-section-codes)

      Classification of a section of a composition/document.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Requirements

      Provides computable standardized labels to topics within the document.

      Pattern Value{
        "coding" : [{
          "system" : "http://loinc.org",
          "code" : "55108-5",
          "display" : "Clinical presentation Document"
        }]
      }
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      86. Composition.section:originalRepresentation.text
      Definition

      A human-readable narrative that contains the attested content of the section, used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative.

      ShortRepresentation of the original viewText summary of the section, for human interpretation
      Comments

      Document profiles may define what content should be represented in the narrative to ensure clinical safety.

      Control10..1
      This element is affected by the following invariants: cmp-1
      TypeNarrative
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      88. Composition.section:originalRepresentation.entry
      Definition

      A reference to the actual resource from which the narrative in the section is derived.

      ShortAccording to the EPR ordonnance the PDF has to be in PDF/A-1 or PDF/A-2 format.A reference to data that supports this section
      Comments

      If there are no entries in the list, an emptyReason SHOULD be provided.

      Control10..1*
      This element is affected by the following invariants: cmp-2
      TypeReference(Binary, Resource)
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      90. Composition.section:originalRepresentation.section
      Definition

      A nested sub-section within this section.

      ShortNested Section
      Comments

      Nested sections are primarily used to help human readers navigate to particular portions of the document.

      Control0..0*
      This element is affected by the following invariants: cmp-1
      TypeSeettp://hl7.org/fhir/StructureDefinition/Composition#Composition.section
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

      Guidance on how to interpret the contents of this table can be found here

      0. Composition
      Definition

      A set of healthcare-related information that is assembled together into a single logical package that provides a single coherent statement of meaning, establishes its own context and that has clinical attestation with regard to who is making the statement. A Composition defines the structure and narrative content necessary for a document. However, a Composition alone does not constitute a document. Rather, the Composition must be the first entry in a Bundle where Bundle.type=document, and any other resources referenced from Composition must be included as subsequent entries in the Bundle (for example Patient, Practitioner, Encounter, etc.).

      ShortCH LAB-Order Composition with ServiceRequest and Form
      Comments

      While the focus of this specification is on patient-specific clinical statements, this resource can also apply to other healthcare-related statements such as study protocol designs, healthcare invoices and other activities that are not necessarily patient-specific or clinical.

      Control0..*
      Is Modifierfalse
      Summaryfalse
      Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
      dom-6: A resource should have narrative for robust management (text.`div`.exists())
      2. Composition.id
      Definition

      The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

      ShortLogical id of this artifact
      Comments

      The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

      Control0..1
      Typeid
      Is Modifierfalse
      Summarytrue
      4. Composition.meta
      Definition

      The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

      ShortMetadata about the resource
      Control0..1
      TypeMeta
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      6. Composition.implicitRules
      Definition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

      ShortA set of rules under which this content was created
      Comments

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

      Control0..1
      Typeuri
      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      8. Composition.language
      Definition

      The base language in which the resource is written.

      ShortLanguage of the resource content
      Comments

      Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

      Control0..1
      BindingThe codes SHOULD be taken from CommonLanguages
      (preferred to http://hl7.org/fhir/ValueSet/languages)

      A human language.

      Additional BindingsPurpose
      AllLanguagesMax Binding
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      10. Composition.text
      Definition

      A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

      ShortNarrative text of the composition
      Comments

      Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

      Control1..1
      TypeNarrative
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Alternate Namesnarrative, html, xhtml, display
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      12. Composition.contained
      Definition

      These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

      ShortContained, inline Resources
      Comments

      This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

      Control0..*
      TypeResource
      Is Modifierfalse
      Summaryfalse
      Alternate Namesinline resources, anonymous resources, contained resources
      14. Composition.extension
      Definition

      An Extension

      ShortExtension
      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on Composition.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 16. Composition.extension:dataEnterer
        Slice NamedataEnterer
        Definition

        Extension to define the information about the person and organization that entered data and the time of the data input

        ShortThe person/organization who has typed/filled in the form content
        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(EPR Data Enterer) (Complex Extension)
        Is Modifierfalse
        Must Supporttrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        18. Composition.extension:urgentNoficationContactForThisDocument
        Slice NameurgentNoficationContactForThisDocument
        Definition

        An information recipient to notify for urgent matters (e.g. in a radiology service, the radiologist has to be called by phone right away at the time the doucment is received).

        ShortAn information recipient to notify for urgent matters
        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(CH ORF Urgent Notification Contact For This Documet) (Extension Type: Reference)
        Is Modifierfalse
        Must Supporttrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        20. Composition.extension:urgentNoficationContactForTheResponseToThisDocument
        Slice NameurgentNoficationContactForTheResponseToThisDocument
        Definition

        An information recipient to notify for urgent matters about the response. (e.g. in a clinical setting, the referring doctor has to be called by phone right away at the time the images and reports arrive. The Urgent Notification Contact for the Response can be specified already in the request. At the time the response is written, this element shall be populated to the Urgent Notification Contact element in the response.)

        ShortAn information recipient to notify for urgent matters about the response
        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(CH ORF Urgent Notification Contact For The Response To This Document) (Extension Type: Reference)
        Is Modifierfalse
        Must Supporttrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        22. Composition.extension:receiver
        Slice Namereceiver
        Definition

        Person/organization who receives the document

        ShortPerson/organization who receives the document
        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(CH ORF Receiver) (Extension Type: Reference)
        Is Modifierfalse
        Must Supporttrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        24. Composition.extension:copyReceiver
        Slice NamecopyReceiver
        Definition

        Receiver of the copy of this order and the results therefrom

        ShortPerson/organization who receives the copy of this order (shall receive also all results therefrom)
        Control0..*
        This element is affected by the following invariants: ele-1
        TypeExtension(CH ORF Copy Receiver) (Extension Type: Reference)
        Is Modifierfalse
        Must Supporttrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        26. Composition.extension:precedentDocument
        Slice NameprecedentDocument
        Definition

        Identifier of the document which precedes this document in a thread.

        ShortIdentifier of the document which precedes this document in a thread.
        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(CH ORF Precedent Document) (Extension Type: Identifier)
        Is Modifierfalse
        Must Supporttrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        28. Composition.extension:antecedentEpisodeOfCare
        Slice NameantecedentEpisodeOfCare
        Definition

        Documentation of the antecedent episode of care e.g hospitalisation in case of care transfer between instituitons e.g. hospitals, rehab. clinics, retirement homes etc.

        ShortDocumentation of the antecedent episode of care e.g hospitalisation in case of care transfer between instituitons e.g. hospitals, rehab. clinics, retirement homes etc.
        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(CH ORF Episode of Care) (Extension Type: Reference)
        Is Modifierfalse
        Must Supporttrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        30. Composition.extension:initiator
        Slice Nameinitiator
        Definition

        Extension to define person/organization who initated this order (may or may not receive a copy)

        ShortProfile to specify who intiated this order; in particulars for spitex and transfer to retirement home etc.
        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(CH ORF Initiator) (Complex Extension)
        Is Modifierfalse
        Must Supporttrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        32. Composition.extension:patientConsent
        Slice NamepatientConsent
        Definition

        Patient Consent to this Order

        ShortTo specify if the patient gave an informed consent to this order; in particulars for spitex and transfer to retirement home etc.
        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(CH ORF Patient Consent) (Extension Type: Reference)
        Is Modifierfalse
        Must Supporttrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        34. Composition.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
        Summaryfalse
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        36. Composition.identifier
        Definition

        A version-independent identifier for the Composition. This identifier stays constant as the composition is changed over time.

        ShortVersion-independent identifier for the Composition
        Comments

        Similar to ClinicalDocument/setId in CDA. See discussion in resource definition for how these relate.

        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..1
        TypeIdentifier
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        38. Composition.status
        Definition

        The workflow/clinical status of this composition. The status is a marker for the clinical standing of the document.

        Shortpreliminary | final | amended | entered-in-error
        Comments

        If a composition is marked as withdrawn, the compositions/documents in the series, or data from the composition or document series, should never be displayed to a user without being clearly marked as untrustworthy. The flag "entered-in-error" is why this element is labeled as a modifier of other elements.

        Some reporting work flows require that the original narrative of a final document never be altered; instead, only new narrative can be added. The composition resource has no explicit status for explicitly noting whether this business rule is in effect. This would be handled by an extension if required.

        Control1..1
        BindingThe codes SHALL be taken from CompositionStatus
        (required to http://hl7.org/fhir/ValueSet/composition-status|4.0.1)

        The workflow/clinical status of the composition.

        Typecode
        Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Requirements

        Need to be able to mark interim, amended, or withdrawn compositions or documents.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        40. Composition.type
        Definition

        Specifies the particular kind of composition (e.g. History and Physical, Discharge Summary, Progress Note). This usually equates to the purpose of making the composition.

        ShortPrecise type of clinical document
        Comments

        For Composition type, LOINC is ubiquitous and strongly endorsed by HL7. Most implementation guides will require a specific LOINC code, or use LOINC as an extensible binding.

        Control1..1
        BindingThe codes SHALL be taken from DocumentEntry.typeCode
        (required to http://fhir.ch/ig/ch-epr-term/ValueSet/DocumentEntry.typeCode)
        TypeCodeableConcept
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Requirements

        Key metadata element describing the composition, used in searching/filtering.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        42. Composition.category
        Definition

        A categorization for the type of the composition - helps for indexing and searching. This may be implied by or derived from the code specified in the Composition Type.

        ShortOrder Document
        Comments

        This is a metadata field from XDS/MHD.

        Control1..1
        BindingThe codes SHALL be taken from DocumentEntry.classCode
        (required to http://fhir.ch/ig/ch-epr-term/ValueSet/DocumentEntry.classCode)
        TypeCodeableConcept
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Requirements

        Helps humans to assess whether the composition is of interest when viewing an index of compositions or documents.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        44. Composition.subject
        Definition

        Who or what the composition is about. The composition can be about a person, (patient or healthcare practitioner), a device (e.g. a machine) or even a group of subjects (such as a document about a herd of livestock, or a set of patients that share a common exposure).

        ShortPatient as the principle target of a particular form content
        Comments

        For clinical documents, this is usually the patient.

        Control1..1
        TypeReference(CH Core Patient)
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Requirements

        Essential metadata for searching for the composition. Identifies who and/or what the composition/document is about.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        46. Composition.subject.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        48. Composition.subject.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on Composition.subject.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 50. Composition.subject.reference
          Definition

          A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

          ShortLiteral reference, Relative, internal or absolute URL
          Comments

          Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

          Control1..1
          This element is affected by the following invariants: ref-1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          52. Composition.subject.type
          Definition

          The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

          The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

          ShortType the reference refers to (e.g. "Patient")
          Comments

          This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

          Control0..1
          BindingUnless not suitable, these codes SHALL be taken from ResourceType
          (extensible to http://hl7.org/fhir/ValueSet/resource-types)

          Aa resource (or, for logical models, the URI of the logical model).

          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          54. Composition.subject.identifier
          Definition

          An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

          ShortLogical reference, when literal reference is not known
          Comments

          When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

          When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

          Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

          Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

          NoteThis is a business identifier, not a resource identifier (see discussion)
          Control0..1
          TypeIdentifier
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          56. Composition.subject.display
          Definition

          Plain text narrative that identifies the resource in addition to the resource reference.

          ShortText alternative for the resource
          Comments

          This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          58. Composition.encounter
          Definition

          Describes the clinical encounter or type of care this documentation is associated with.

          ShortContext of the Composition
          Control0..1
          TypeReference(CH Core Encounter)
          Is Modifierfalse
          Summarytrue
          Requirements

          Provides context for the composition and supports searching.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          60. Composition.date
          Definition

          The composition editing time, when the composition was last logically changed by the author.

          ShortComposition editing time
          Comments

          The Last Modified Date on the composition may be after the date of the document was attested without being changed.

          Control1..1
          TypedateTime
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          dateTime is used for tracking, organizing versions and searching. Note that this is the time of authoring. When packaged in a document, Bundle.timestamp is the date of packaging.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          62. Composition.author
          Definition

          Identifies who is responsible for the information in the composition, not necessarily who typed it in.

          ShortThe person/organization responsible for the form content
          Control1..1
          TypeReference(CH Core PractitionerRole)
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Requirements

          Identifies who is responsible for the content.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          64. Composition.author.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          66. Composition.author.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on Composition.author.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 68. Composition.author.reference
            Definition

            A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

            ShortLiteral reference, Relative, internal or absolute URL
            Comments

            Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

            Control1..1
            This element is affected by the following invariants: ref-1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            70. Composition.author.type
            Definition

            The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

            The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

            ShortType the reference refers to (e.g. "Patient")
            Comments

            This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

            Control0..1
            BindingUnless not suitable, these codes SHALL be taken from ResourceType
            (extensible to http://hl7.org/fhir/ValueSet/resource-types)

            Aa resource (or, for logical models, the URI of the logical model).

            Typeuri
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            72. Composition.author.identifier
            Definition

            An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

            ShortLogical reference, when literal reference is not known
            Comments

            When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

            When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

            Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

            Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

            NoteThis is a business identifier, not a resource identifier (see discussion)
            Control0..1
            TypeIdentifier
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            74. Composition.author.display
            Definition

            Plain text narrative that identifies the resource in addition to the resource reference.

            ShortText alternative for the resource
            Comments

            This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

            Control0..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            76. Composition.title
            Definition

            Official human-readable label for the composition.

            ShortMeaningful title
            Comments

            For many compositions, the title is the same as the text or a display name of Composition.type (e.g. a "consultation" or "progress note"). Note that CDA does not make title mandatory, but there are no known cases where it is useful for title to be omitted, so it is mandatory here. Feedback on this requirement is welcome during the trial use period.

            Control1..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            78. Composition.confidentiality
            Definition

            The code specifying the level of confidentiality of the Composition.

            ShortAs defined by affinity domain
            Comments

            The exact use of this element, and enforcement and issues related to highly sensitive documents are out of scope for the base specification, and delegated to implementation profiles (see security section). This element is labeled as a modifier because highly confidential documents must not be treated as if they are not.

            Control0..1
            BindingThe codes SHALL be taken from v3.ConfidentialityClassification (2014-03-26)
            (required to http://terminology.hl7.org/ValueSet/v3-ConfidentialityClassification|2014-03-26)

            Codes specifying the level of confidentiality of the composition.

            Typecode
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            80. Composition.attester
            Definition

            A participant who has attested to the accuracy of the composition/document.

            ShortAttests to accuracy of composition
            Comments

            Only list each attester once.

            Control0..*
            TypeBackboneElement
            Is Modifierfalse
            Summaryfalse
            Requirements

            Identifies responsibility for the accuracy of the composition content.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            82. Composition.attester.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            84. Composition.attester.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            86. Composition.attester.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            88. Composition.attester.mode
            Definition

            The type of attestation the authenticator offers.

            Shortpersonal | professional | legal | official
            Control1..1
            BindingThe codes SHALL be taken from CompositionAttestationMode
            (required to http://hl7.org/fhir/ValueSet/composition-attestation-mode|4.0.1)

            The way in which a person authenticated a composition.

            Typecode
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Requirements

            Indicates the level of authority of the attestation.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            90. Composition.attester.time
            Definition

            When the composition was attested by the party.

            ShortWhen the composition was attested
            Control0..1
            TypedateTime
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Requirements

            Identifies when the information in the composition was deemed accurate. (Things may have changed since then.).

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            92. Composition.attester.party
            Definition

            Who attested the composition in the specified way.

            ShortWho attested the composition
            Control0..1
            TypeReference(CH Core Patient, RelatedPerson, CH Core Practitioner, CH Core PractitionerRole, CH Core Organization)
            Is Modifierfalse
            Summaryfalse
            Requirements

            Identifies who has taken on the responsibility for accuracy of the composition content.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            94. Composition.attester.party.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            96. Composition.attester.party.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on Composition.attester.party.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 98. Composition.attester.party.reference
              Definition

              A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

              ShortLiteral reference, Relative, internal or absolute URL
              Comments

              Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

              Control1..1
              This element is affected by the following invariants: ref-1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              100. Composition.attester.party.type
              Definition

              The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

              The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

              ShortType the reference refers to (e.g. "Patient")
              Comments

              This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

              Control0..1
              BindingUnless not suitable, these codes SHALL be taken from ResourceType
              (extensible to http://hl7.org/fhir/ValueSet/resource-types)

              Aa resource (or, for logical models, the URI of the logical model).

              Typeuri
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              102. Composition.attester.party.identifier
              Definition

              An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

              ShortLogical reference, when literal reference is not known
              Comments

              When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

              When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

              Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

              Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

              NoteThis is a business identifier, not a resource identifier (see discussion)
              Control0..1
              TypeIdentifier
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              104. Composition.attester.party.display
              Definition

              Plain text narrative that identifies the resource in addition to the resource reference.

              ShortText alternative for the resource
              Comments

              This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

              Control0..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              106. Composition.custodian
              Definition

              Identifies the organization or group who is responsible for ongoing maintenance of and access to the composition/document information.

              ShortOrganization which maintains the composition
              Comments

              This is useful when documents are derived from a composition - provides guidance for how to get the latest version of the document. This is optional because this is sometimes not known by the authoring system, and can be inferred by context. However, it is important that this information be known when working with a derived document, so providing a custodian is encouraged.

              Control0..1
              TypeReference(CH Core Organization)
              Is Modifierfalse
              Summarytrue
              Requirements

              Identifies where to go to find the current version, where to report issues, etc.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              108. Composition.custodian.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              110. Composition.custodian.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              SlicingThis element introduces a set of slices on Composition.custodian.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 112. Composition.custodian.reference
                Definition

                A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

                ShortLiteral reference, Relative, internal or absolute URL
                Comments

                Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

                Control1..1
                This element is affected by the following invariants: ref-1
                Typestring
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                114. Composition.custodian.type
                Definition

                The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

                The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

                ShortType the reference refers to (e.g. "Patient")
                Comments

                This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

                Control0..1
                BindingUnless not suitable, these codes SHALL be taken from ResourceType
                (extensible to http://hl7.org/fhir/ValueSet/resource-types)

                Aa resource (or, for logical models, the URI of the logical model).

                Typeuri
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                116. Composition.custodian.identifier
                Definition

                An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

                ShortLogical reference, when literal reference is not known
                Comments

                When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

                When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

                Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

                Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

                NoteThis is a business identifier, not a resource identifier (see discussion)
                Control0..1
                TypeIdentifier
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                118. Composition.custodian.display
                Definition

                Plain text narrative that identifies the resource in addition to the resource reference.

                ShortText alternative for the resource
                Comments

                This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

                Control0..1
                Typestring
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                120. Composition.relatesTo
                Definition

                Relationships that this composition has with other compositions or documents that already exist.

                ShortRelationships to other compositions/documents
                Comments

                A document is a version specific composition.

                Control0..*
                TypeBackboneElement
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                122. Composition.relatesTo.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                124. Composition.relatesTo.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                126. Composition.relatesTo.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                128. Composition.relatesTo.code
                Definition

                The type of relationship that this composition has with anther composition or document.

                Shortreplaces | transforms | signs | appends
                Comments

                If this document appends another document, then the document cannot be fully understood without also accessing the referenced document.

                Control1..1
                BindingThe codes SHALL be taken from DocumentRelationshipType
                (required to http://hl7.org/fhir/ValueSet/document-relationship-type|4.0.1)

                The type of relationship between documents.

                Typecode
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                130. Composition.relatesTo.target[x]
                Definition

                The target composition/document of this relationship.

                ShortTarget of the relationship
                Control1..1
                TypeChoice of: Identifier, Reference(CH Core Composition)
                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                132. Composition.event
                Definition

                The clinical service, such as a colonoscopy or an appendectomy, being documented.

                ShortThe clinical service(s) being documented
                Comments

                The event needs to be consistent with the type element, though can provide further information if desired.

                Control0..*
                TypeBackboneElement
                Is Modifierfalse
                Summarytrue
                Requirements

                Provides context for the composition and creates a linkage between a resource describing an event and the composition created describing the event.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                134. Composition.event.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                136. Composition.event.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                138. Composition.event.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored even if unrecognized
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                Summarytrue
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content, modifiers
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                140. Composition.event.code
                Definition

                This list of codes represents the main clinical acts, such as a colonoscopy or an appendectomy, being documented. In some cases, the event is inherent in the typeCode, such as a "History and Physical Report" in which the procedure being documented is necessarily a "History and Physical" act.

                ShortCode(s) that apply to the event being documented
                Comments

                An event can further specialize the act inherent in the typeCode, such as where it is simply "Procedure Report" and the procedure was a "colonoscopy". If one or more eventCodes are included, they SHALL NOT conflict with the values inherent in the classCode, practiceSettingCode or typeCode, as such a conflict would create an ambiguous situation. This short list of codes is provided to be used as key words for certain types of queries.

                Control0..*
                BindingFor example codes, see v3 Code System ActCode
                (example to http://terminology.hl7.org/ValueSet/v3-ActCode)

                This list of codes represents the main clinical acts being documented.

                TypeCodeableConcept
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                142. Composition.event.period
                Definition

                The period of time covered by the documentation. There is no assertion that the documentation is a complete representation for this period, only that it documents events during this time.

                ShortThe period covered by the documentation
                Control0..1
                TypePeriod
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                144. Composition.event.detail
                Definition

                The description and/or reference of the event(s) being documented. For example, this could be used to document such a colonoscopy or an appendectomy.

                ShortThe event(s) being documented
                Control0..*
                TypeReference(Resource)
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                146. Composition.section
                Definition

                The root of the sections that make up the composition.

                ShortComposition is broken into sections
                Control1..*
                TypeBackboneElement
                Is Modifierfalse
                Must Supporttrue
                Summaryfalse
                Invariantscmp-1: A section must contain at least one of text, entries, or sub-sections (text.exists() or entry.exists() or section.exists())
                cmp-2: A section can only have an emptyReason if it is empty (emptyReason.empty() or entry.empty())
                ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                SlicingThis element introduces a set of slices on Composition.section. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • pattern @ code
                • 148. Composition.section.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  150. Composition.section.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  152. Composition.section.modifierExtension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                  ShortExtensions that cannot be ignored even if unrecognized
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                  Summarytrue
                  Requirements

                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                  Alternate Namesextensions, user content, modifiers
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  154. Composition.section.title
                  Definition

                  The label for this particular section. This will be part of the rendered content for the document, and is often used to build a table of contents.

                  ShortLabel for section (e.g. for ToC)
                  Comments

                  The title identifies the section for a human reader. The title must be consistent with the narrative of the resource that is the target of the section.content reference. Generally, sections SHOULD have titles, but in some documents, it is unnecessary or inappropriate. Typically, this is where a section has subsections that have their own adequately distinguishing title, or documents that only have a single section. Most Implementation Guides will make section title to be a required element.

                  Control0..1
                  Typestring
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summaryfalse
                  Requirements

                  Section headings are often standardized for different types of documents. They give guidance to humans on how the document is organized.

                  Alternate Namesheader, label, caption
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  156. Composition.section.code
                  Definition

                  A code identifying the kind of content contained within the section. This must be consistent with the section title.

                  ShortClassification of section (recommended)
                  Comments

                  The code identifies the section for an automated processor of the document. This is particularly relevant when using profiles to control the structure of the document.

                  If the section has content (instead of sub-sections), the section.code does not change the meaning or interpretation of the resource that is the content of the section in the comments for the section.code.

                  Control0..1
                  BindingFor example codes, see DocumentSectionCodes
                  (example to http://hl7.org/fhir/ValueSet/doc-section-codes)

                  Classification of a section of a composition/document.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Summaryfalse
                  Requirements

                  Provides computable standardized labels to topics within the document.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  158. Composition.section.author
                  Definition

                  Identifies who is responsible for the information in this section, not necessarily who typed it in.

                  ShortWho and/or what authored the section
                  Control0..*
                  TypeReference(CH Core Practitioner, CH Core PractitionerRole, Device, CH Core Patient, RelatedPerson, CH Core Organization)
                  Is Modifierfalse
                  Summaryfalse
                  Requirements

                  Identifies who is responsible for the content.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  160. Composition.section.focus
                  Definition

                  The actual focus of the section when it is not the subject of the composition, but instead represents something or someone associated with the subject such as (for a patient subject) a spouse, parent, fetus, or donor. If not focus is specified, the focus is assumed to be focus of the parent section, or, for a section in the Composition itself, the subject of the composition. Sections with a focus SHALL only include resources where the logical subject (patient, subject, focus, etc.) matches the section focus, or the resources have no logical subject (few resources).

                  ShortWho/what the section is about, when it is not about the subject of composition
                  Comments

                  Typically, sections in a doument are about the subject of the document, whether that is a patient, or group of patients, location, or device, or whatever. For some kind of documents, some sections actually contain data about related entities. Typical examples are a section in a newborn discharge summary concerning the mother, or family history documents, with a section about each family member, though there are many other examples.

                  Control0..1
                  TypeReference(Resource)
                  Is Modifierfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  162. Composition.section.text
                  Definition

                  A human-readable narrative that contains the attested content of the section, used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative.

                  ShortText summary of the section, for human interpretation
                  Comments

                  Document profiles may define what content should be represented in the narrative to ensure clinical safety.

                  Control0..1
                  This element is affected by the following invariants: cmp-1
                  TypeNarrative
                  Is Modifierfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  164. Composition.section.mode
                  Definition

                  How the entry list was prepared - whether it is a working list that is suitable for being maintained on an ongoing basis, or if it represents a snapshot of a list of items from another source, or whether it is a prepared list where items may be marked as added, modified or deleted.

                  Shortworking | snapshot | changes
                  Comments

                  This element is labeled as a modifier because a change list must not be misunderstood as a complete list.

                  Control0..1
                  BindingThe codes SHALL be taken from ListMode
                  (required to http://hl7.org/fhir/ValueSet/list-mode|4.0.1)

                  The processing mode that applies to this section.

                  Typecode
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summaryfalse
                  Requirements

                  Sections are used in various ways, and it must be known in what way it is safe to use the entries in them.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  166. Composition.section.orderedBy
                  Definition

                  Specifies the order applied to the items in the section entries.

                  ShortOrder of section entries
                  Comments

                  Applications SHOULD render ordered lists in the order provided, but MAY allow users to re-order based on their own preferences as well. If there is no order specified, the order is unknown, though there may still be some order.

                  Control0..1
                  BindingThe codes SHOULD be taken from ListOrderCodes
                  (preferred to http://hl7.org/fhir/ValueSet/list-order)

                  What order applies to the items in the entry.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Summaryfalse
                  Requirements

                  Important for presentation and rendering. Lists may be sorted to place more important information first or to group related entries.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  168. Composition.section.entry
                  Definition

                  A reference to the actual resource from which the narrative in the section is derived.

                  ShortA reference to data that supports this section
                  Comments

                  If there are no entries in the list, an emptyReason SHOULD be provided.

                  Control0..*
                  This element is affected by the following invariants: cmp-2
                  TypeReference(Resource)
                  Is Modifierfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  170. Composition.section.emptyReason
                  Definition

                  If the section is empty, why the list is empty. An empty section typically has some text explaining the empty reason.

                  ShortWhy the section is empty
                  Comments

                  The various reasons for an empty section make a significant interpretation to its interpretation. Note that this code is for use when the entire section content has been suppressed, and not for when individual items are omitted - implementers may consider using a text note or a flag on an entry in these cases.

                  Control0..1
                  This element is affected by the following invariants: cmp-2
                  BindingThe codes SHOULD be taken from ListEmptyReasons
                  (preferred to http://hl7.org/fhir/ValueSet/list-empty-reason)

                  If a section is empty, why it is empty.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Summaryfalse
                  Requirements

                  Allows capturing things like "none exist" or "not asked" which can be important for most lists.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  172. Composition.section.section
                  Definition

                  A nested sub-section within this section.

                  ShortNested Section
                  Comments

                  Nested sections are primarily used to help human readers navigate to particular portions of the document.

                  Control0..*
                  This element is affected by the following invariants: cmp-1
                  TypeSeettp://hl7.org/fhir/StructureDefinition/Composition#Composition.section
                  Is Modifierfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  174. Composition.section:orderReferral
                  Slice NameorderReferral
                  Definition

                  The root of the sections that make up the composition.

                  ShortContains the data that supports the order and referral by form.
                  Control1..1
                  TypeBackboneElement
                  Is Modifierfalse
                  Must Supporttrue
                  Summaryfalse
                  Invariantscmp-1: A section must contain at least one of text, entries, or sub-sections (text.exists() or entry.exists() or section.exists())
                  cmp-2: A section can only have an emptyReason if it is empty (emptyReason.empty() or entry.empty())
                  ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  176. Composition.section:orderReferral.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  178. Composition.section:orderReferral.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  180. Composition.section:orderReferral.modifierExtension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                  Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                  ShortExtensions that cannot be ignored even if unrecognized
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                  Summarytrue
                  Requirements

                  Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                  Alternate Namesextensions, user content, modifiers
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  182. Composition.section:orderReferral.title
                  Definition

                  The label for this particular section. This will be part of the rendered content for the document, and is often used to build a table of contents.

                  ShortOrder-Referral
                  Comments

                  The title identifies the section for a human reader. The title must be consistent with the narrative of the resource that is the target of the section.content reference. Generally, sections SHOULD have titles, but in some documents, it is unnecessary or inappropriate. Typically, this is where a section has subsections that have their own adequately distinguishing title, or documents that only have a single section. Most Implementation Guides will make section title to be a required element.

                  Control1..1
                  Typestring
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Must Supporttrue
                  Summaryfalse
                  Requirements

                  Section headings are often standardized for different types of documents. They give guidance to humans on how the document is organized.

                  Alternate Namesheader, label, caption
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  184. Composition.section:orderReferral.code
                  Definition

                  A code identifying the kind of content contained within the section. This must be consistent with the section title.

                  ShortClassification of section (recommended)
                  Comments

                  The code identifies the section for an automated processor of the document. This is particularly relevant when using profiles to control the structure of the document.

                  If the section has content (instead of sub-sections), the section.code does not change the meaning or interpretation of the resource that is the content of the section in the comments for the section.code.

                  Control1..1
                  BindingFor example codes, see DocumentSectionCodes
                  (example to http://hl7.org/fhir/ValueSet/doc-section-codes)

                  Classification of a section of a composition/document.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Must Supporttrue
                  Summaryfalse
                  Requirements

                  Provides computable standardized labels to topics within the document.

                  Pattern Value{
                    "coding" : [{
                      "system" : "http://loinc.org",
                      "code" : "93037-0"
                    }]
                  }
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  186. Composition.section:orderReferral.author
                  Definition

                  Identifies who is responsible for the information in this section, not necessarily who typed it in.

                  ShortWho and/or what authored the section
                  Control0..*
                  TypeReference(CH Core Practitioner, CH Core PractitionerRole, Device, CH Core Patient, RelatedPerson, CH Core Organization)
                  Is Modifierfalse
                  Summaryfalse
                  Requirements

                  Identifies who is responsible for the content.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  188. Composition.section:orderReferral.focus
                  Definition

                  The actual focus of the section when it is not the subject of the composition, but instead represents something or someone associated with the subject such as (for a patient subject) a spouse, parent, fetus, or donor. If not focus is specified, the focus is assumed to be focus of the parent section, or, for a section in the Composition itself, the subject of the composition. Sections with a focus SHALL only include resources where the logical subject (patient, subject, focus, etc.) matches the section focus, or the resources have no logical subject (few resources).

                  ShortWho/what the section is about, when it is not about the subject of composition
                  Comments

                  Typically, sections in a doument are about the subject of the document, whether that is a patient, or group of patients, location, or device, or whatever. For some kind of documents, some sections actually contain data about related entities. Typical examples are a section in a newborn discharge summary concerning the mother, or family history documents, with a section about each family member, though there are many other examples.

                  Control0..1
                  TypeReference(Resource)
                  Is Modifierfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  190. Composition.section:orderReferral.text
                  Definition

                  A human-readable narrative that contains the attested content of the section, used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative.

                  ShortText summary of the section, for human interpretation
                  Comments

                  Document profiles may define what content should be represented in the narrative to ensure clinical safety.

                  Control0..1
                  This element is affected by the following invariants: cmp-1
                  TypeNarrative
                  Is Modifierfalse
                  Must Supporttrue
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  192. Composition.section:orderReferral.mode
                  Definition

                  How the entry list was prepared - whether it is a working list that is suitable for being maintained on an ongoing basis, or if it represents a snapshot of a list of items from another source, or whether it is a prepared list where items may be marked as added, modified or deleted.

                  Shortworking | snapshot | changes
                  Comments

                  This element is labeled as a modifier because a change list must not be misunderstood as a complete list.

                  Control0..1
                  BindingThe codes SHALL be taken from ListMode
                  (required to http://hl7.org/fhir/ValueSet/list-mode|4.0.1)

                  The processing mode that applies to this section.

                  Typecode
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summaryfalse
                  Requirements

                  Sections are used in various ways, and it must be known in what way it is safe to use the entries in them.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  194. Composition.section:orderReferral.orderedBy
                  Definition

                  Specifies the order applied to the items in the section entries.

                  ShortOrder of section entries
                  Comments

                  Applications SHOULD render ordered lists in the order provided, but MAY allow users to re-order based on their own preferences as well. If there is no order specified, the order is unknown, though there may still be some order.

                  Control0..1
                  BindingThe codes SHOULD be taken from ListOrderCodes
                  (preferred to http://hl7.org/fhir/ValueSet/list-order)

                  What order applies to the items in the entry.

                  TypeCodeableConcept
                  Is Modifierfalse
                  Summaryfalse
                  Requirements

                  Important for presentation and rendering. Lists may be sorted to place more important information first or to group related entries.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  196. Composition.section:orderReferral.entry
                  Definition

                  A reference to the actual resource from which the narrative in the section is derived.

                  ShortA reference to data that supports this section
                  Comments

                  If there are no entries in the list, an emptyReason SHOULD be provided.

                  Control3..*
                  This element is affected by the following invariants: cmp-2
                  TypeReference(Resource)
                  Is Modifierfalse
                  Must Supporttrue
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  SlicingThis element introduces a set of slices on Composition.section.entry. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • profile @ resolve()
                  • 198. Composition.section:orderReferral.entry:Questionnaire
                    Slice NameQuestionnaire
                    Definition

                    A reference to the actual resource from which the narrative in the section is derived.

                    ShortQuestionnaire
                    Comments

                    If there are no entries in the list, an emptyReason SHOULD be provided.

                    Control1..1
                    This element is affected by the following invariants: cmp-2
                    TypeReference(CH ORF Questionnaire)
                    Is Modifierfalse
                    Must Supporttrue
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    200. Composition.section:orderReferral.entry:Questionnaire.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    202. Composition.section:orderReferral.entry:Questionnaire.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    SlicingThis element introduces a set of slices on Composition.section.entry.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                    • value @ url
                    • 204. Composition.section:orderReferral.entry:Questionnaire.reference
                      Definition

                      A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

                      ShortLiteral reference, Relative, internal or absolute URL
                      Comments

                      Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

                      Control1..1
                      This element is affected by the following invariants: ref-1
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supporttrue
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      206. Composition.section:orderReferral.entry:Questionnaire.type
                      Definition

                      The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

                      The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

                      ShortType the reference refers to (e.g. "Patient")
                      Comments

                      This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

                      Control0..1
                      BindingUnless not suitable, these codes SHALL be taken from ResourceType
                      (extensible to http://hl7.org/fhir/ValueSet/resource-types)

                      Aa resource (or, for logical models, the URI of the logical model).

                      Typeuri
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      208. Composition.section:orderReferral.entry:Questionnaire.identifier
                      Definition

                      An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

                      ShortLogical reference, when literal reference is not known
                      Comments

                      When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

                      When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

                      Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

                      Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

                      NoteThis is a business identifier, not a resource identifier (see discussion)
                      Control0..1
                      TypeIdentifier
                      Is Modifierfalse
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      210. Composition.section:orderReferral.entry:Questionnaire.display
                      Definition

                      Plain text narrative that identifies the resource in addition to the resource reference.

                      ShortText alternative for the resource
                      Comments

                      This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

                      Control0..1
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      212. Composition.section:orderReferral.entry:QuestionnaireResponse
                      Slice NameQuestionnaireResponse
                      Definition

                      A reference to the actual resource from which the narrative in the section is derived.

                      ShortQuestionnaireResponse
                      Comments

                      If there are no entries in the list, an emptyReason SHOULD be provided.

                      Control1..1
                      This element is affected by the following invariants: cmp-2
                      TypeReference(CH ORF QuestionnaireResponse)
                      Is Modifierfalse
                      Must Supporttrue
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      214. Composition.section:orderReferral.entry:QuestionnaireResponse.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      216. Composition.section:orderReferral.entry:QuestionnaireResponse.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      SlicingThis element introduces a set of slices on Composition.section.entry.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                      • value @ url
                      • 218. Composition.section:orderReferral.entry:QuestionnaireResponse.reference
                        Definition

                        A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

                        ShortLiteral reference, Relative, internal or absolute URL
                        Comments

                        Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

                        Control1..1
                        This element is affected by the following invariants: ref-1
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Must Supporttrue
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        220. Composition.section:orderReferral.entry:QuestionnaireResponse.type
                        Definition

                        The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

                        The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

                        ShortType the reference refers to (e.g. "Patient")
                        Comments

                        This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

                        Control0..1
                        BindingUnless not suitable, these codes SHALL be taken from ResourceType
                        (extensible to http://hl7.org/fhir/ValueSet/resource-types)

                        Aa resource (or, for logical models, the URI of the logical model).

                        Typeuri
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        222. Composition.section:orderReferral.entry:QuestionnaireResponse.identifier
                        Definition

                        An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

                        ShortLogical reference, when literal reference is not known
                        Comments

                        When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

                        When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

                        Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

                        Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

                        NoteThis is a business identifier, not a resource identifier (see discussion)
                        Control0..1
                        TypeIdentifier
                        Is Modifierfalse
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        224. Composition.section:orderReferral.entry:QuestionnaireResponse.display
                        Definition

                        Plain text narrative that identifies the resource in addition to the resource reference.

                        ShortText alternative for the resource
                        Comments

                        This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

                        Control0..1
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        226. Composition.section:orderReferral.entry:ServiceRequest
                        Slice NameServiceRequest
                        Definition

                        A reference to the actual resource from which the narrative in the section is derived.

                        ShortServiceRequest
                        Comments

                        If there are no entries in the list, an emptyReason SHOULD be provided.

                        Control1..*
                        This element is affected by the following invariants: cmp-2
                        TypeReference(CH ORF ServiceRequest)
                        Is Modifierfalse
                        Must Supporttrue
                        Summaryfalse
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        228. Composition.section:orderReferral.entry:ServiceRequest.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        230. Composition.section:orderReferral.entry:ServiceRequest.extension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                        ShortAdditional content defined by implementations
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Alternate Namesextensions, user content
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        SlicingThis element introduces a set of slices on Composition.section.entry.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                        • value @ url
                        • 232. Composition.section:orderReferral.entry:ServiceRequest.reference
                          Definition

                          A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

                          ShortLiteral reference, Relative, internal or absolute URL
                          Comments

                          Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

                          Control1..1
                          This element is affected by the following invariants: ref-1
                          Typestring
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Must Supporttrue
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          234. Composition.section:orderReferral.entry:ServiceRequest.type
                          Definition

                          The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

                          The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

                          ShortType the reference refers to (e.g. "Patient")
                          Comments

                          This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

                          Control0..1
                          BindingUnless not suitable, these codes SHALL be taken from ResourceType
                          (extensible to http://hl7.org/fhir/ValueSet/resource-types)

                          Aa resource (or, for logical models, the URI of the logical model).

                          Typeuri
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          236. Composition.section:orderReferral.entry:ServiceRequest.identifier
                          Definition

                          An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

                          ShortLogical reference, when literal reference is not known
                          Comments

                          When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

                          When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

                          Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

                          Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

                          NoteThis is a business identifier, not a resource identifier (see discussion)
                          Control0..1
                          TypeIdentifier
                          Is Modifierfalse
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          238. Composition.section:orderReferral.entry:ServiceRequest.display
                          Definition

                          Plain text narrative that identifies the resource in addition to the resource reference.

                          ShortText alternative for the resource
                          Comments

                          This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

                          Control0..1
                          Typestring
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          240. Composition.section:orderReferral.entry:DocumentReference
                          Slice NameDocumentReference
                          Definition

                          A reference to the actual resource from which the narrative in the section is derived.

                          ShortDocumentReference
                          Comments

                          If there are no entries in the list, an emptyReason SHOULD be provided.

                          Control0..*
                          This element is affected by the following invariants: cmp-2
                          TypeReference(CH ORF DocumentReference)
                          Is Modifierfalse
                          Must Supporttrue
                          Summaryfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          242. Composition.section:orderReferral.entry:DocumentReference.id
                          Definition

                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                          ShortUnique id for inter-element referencing
                          Control0..1
                          Typestring
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          244. Composition.section:orderReferral.entry:DocumentReference.extension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                          ShortAdditional content defined by implementations
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifierfalse
                          Summaryfalse
                          Alternate Namesextensions, user content
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          SlicingThis element introduces a set of slices on Composition.section.entry.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                          • value @ url
                          • 246. Composition.section:orderReferral.entry:DocumentReference.reference
                            Definition

                            A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

                            ShortLiteral reference, Relative, internal or absolute URL
                            Comments

                            Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

                            Control1..1
                            This element is affected by the following invariants: ref-1
                            Typestring
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supporttrue
                            Summarytrue
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            248. Composition.section:orderReferral.entry:DocumentReference.type
                            Definition

                            The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

                            The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

                            ShortType the reference refers to (e.g. "Patient")
                            Comments

                            This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

                            Control0..1
                            BindingUnless not suitable, these codes SHALL be taken from ResourceType
                            (extensible to http://hl7.org/fhir/ValueSet/resource-types)

                            Aa resource (or, for logical models, the URI of the logical model).

                            Typeuri
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            250. Composition.section:orderReferral.entry:DocumentReference.identifier
                            Definition

                            An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

                            ShortLogical reference, when literal reference is not known
                            Comments

                            When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

                            When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

                            Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

                            Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

                            NoteThis is a business identifier, not a resource identifier (see discussion)
                            Control0..1
                            TypeIdentifier
                            Is Modifierfalse
                            Summarytrue
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            252. Composition.section:orderReferral.entry:DocumentReference.display
                            Definition

                            Plain text narrative that identifies the resource in addition to the resource reference.

                            ShortText alternative for the resource
                            Comments

                            This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

                            Control0..1
                            Typestring
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summarytrue
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            254. Composition.section:orderReferral.emptyReason
                            Definition

                            If the section is empty, why the list is empty. An empty section typically has some text explaining the empty reason.

                            ShortWhy the section is empty
                            Comments

                            The various reasons for an empty section make a significant interpretation to its interpretation. Note that this code is for use when the entire section content has been suppressed, and not for when individual items are omitted - implementers may consider using a text note or a flag on an entry in these cases.

                            Control0..1
                            This element is affected by the following invariants: cmp-2
                            BindingThe codes SHOULD be taken from ListEmptyReasons
                            (preferred to http://hl7.org/fhir/ValueSet/list-empty-reason)

                            If a section is empty, why it is empty.

                            TypeCodeableConcept
                            Is Modifierfalse
                            Summaryfalse
                            Requirements

                            Allows capturing things like "none exist" or "not asked" which can be important for most lists.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            256. Composition.section:orderReferral.section
                            Definition

                            A nested sub-section within this section.

                            ShortNested Section
                            Comments

                            Nested sections are primarily used to help human readers navigate to particular portions of the document.

                            Control0..0
                            This element is affected by the following invariants: cmp-1
                            TypeSeettp://hl7.org/fhir/StructureDefinition/Composition#Composition.section
                            Is Modifierfalse
                            Summaryfalse
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            258. Composition.section:originalRepresentation
                            Slice NameoriginalRepresentation
                            Definition

                            The root of the sections that make up the composition.

                            ShortContains the original representation as a PDF of the current document.
                            Control0..1
                            TypeBackboneElement
                            Is Modifierfalse
                            Must Supporttrue
                            Summaryfalse
                            Invariantscmp-1: A section must contain at least one of text, entries, or sub-sections (text.exists() or entry.exists() or section.exists())
                            cmp-2: A section can only have an emptyReason if it is empty (emptyReason.empty() or entry.empty())
                            ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            260. Composition.section:originalRepresentation.id
                            Definition

                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                            ShortUnique id for inter-element referencing
                            Control0..1
                            Typestring
                            Is Modifierfalse
                            XML FormatIn the XML format, this property is represented as an attribute.
                            Summaryfalse
                            262. Composition.section:originalRepresentation.extension
                            Definition

                            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                            ShortAdditional content defined by implementations
                            Comments

                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                            Control0..*
                            TypeExtension
                            Is Modifierfalse
                            Summaryfalse
                            Alternate Namesextensions, user content
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            264. Composition.section:originalRepresentation.modifierExtension
                            Definition

                            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                            ShortExtensions that cannot be ignored even if unrecognized
                            Comments

                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                            Control0..*
                            TypeExtension
                            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                            Summarytrue
                            Requirements

                            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                            Alternate Namesextensions, user content, modifiers
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            266. Composition.section:originalRepresentation.title
                            Definition

                            The label for this particular section. This will be part of the rendered content for the document, and is often used to build a table of contents.

                            ShortOriginal representation
                            Comments

                            The title identifies the section for a human reader. The title must be consistent with the narrative of the resource that is the target of the section.content reference. Generally, sections SHOULD have titles, but in some documents, it is unnecessary or inappropriate. Typically, this is where a section has subsections that have their own adequately distinguishing title, or documents that only have a single section. Most Implementation Guides will make section title to be a required element.

                            Control1..1
                            Typestring
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Must Supporttrue
                            Summaryfalse
                            Requirements

                            Section headings are often standardized for different types of documents. They give guidance to humans on how the document is organized.

                            Alternate Namesheader, label, caption
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            268. Composition.section:originalRepresentation.code
                            Definition

                            A code identifying the kind of content contained within the section. This must be consistent with the section title.

                            ShortClassification of section (recommended)
                            Comments

                            The code identifies the section for an automated processor of the document. This is particularly relevant when using profiles to control the structure of the document.

                            If the section has content (instead of sub-sections), the section.code does not change the meaning or interpretation of the resource that is the content of the section in the comments for the section.code.

                            Control1..1
                            BindingFor example codes, see DocumentSectionCodes
                            (example to http://hl7.org/fhir/ValueSet/doc-section-codes)

                            Classification of a section of a composition/document.

                            TypeCodeableConcept
                            Is Modifierfalse
                            Must Supporttrue
                            Summaryfalse
                            Requirements

                            Provides computable standardized labels to topics within the document.

                            Pattern Value{
                              "coding" : [{
                                "system" : "http://loinc.org",
                                "code" : "55108-5",
                                "display" : "Clinical presentation Document"
                              }]
                            }
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            270. Composition.section:originalRepresentation.author
                            Definition

                            Identifies who is responsible for the information in this section, not necessarily who typed it in.

                            ShortWho and/or what authored the section
                            Control0..*
                            TypeReference(CH Core Practitioner, CH Core PractitionerRole, Device, CH Core Patient, RelatedPerson, CH Core Organization)
                            Is Modifierfalse
                            Summaryfalse
                            Requirements

                            Identifies who is responsible for the content.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            272. Composition.section:originalRepresentation.focus
                            Definition

                            The actual focus of the section when it is not the subject of the composition, but instead represents something or someone associated with the subject such as (for a patient subject) a spouse, parent, fetus, or donor. If not focus is specified, the focus is assumed to be focus of the parent section, or, for a section in the Composition itself, the subject of the composition. Sections with a focus SHALL only include resources where the logical subject (patient, subject, focus, etc.) matches the section focus, or the resources have no logical subject (few resources).

                            ShortWho/what the section is about, when it is not about the subject of composition
                            Comments

                            Typically, sections in a doument are about the subject of the document, whether that is a patient, or group of patients, location, or device, or whatever. For some kind of documents, some sections actually contain data about related entities. Typical examples are a section in a newborn discharge summary concerning the mother, or family history documents, with a section about each family member, though there are many other examples.

                            Control0..1
                            TypeReference(Resource)
                            Is Modifierfalse
                            Summaryfalse
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            274. Composition.section:originalRepresentation.text
                            Definition

                            A human-readable narrative that contains the attested content of the section, used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative.

                            ShortRepresentation of the original view
                            Comments

                            Document profiles may define what content should be represented in the narrative to ensure clinical safety.

                            Control1..1
                            This element is affected by the following invariants: cmp-1
                            TypeNarrative
                            Is Modifierfalse
                            Must Supporttrue
                            Summaryfalse
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            276. Composition.section:originalRepresentation.mode
                            Definition

                            How the entry list was prepared - whether it is a working list that is suitable for being maintained on an ongoing basis, or if it represents a snapshot of a list of items from another source, or whether it is a prepared list where items may be marked as added, modified or deleted.

                            Shortworking | snapshot | changes
                            Comments

                            This element is labeled as a modifier because a change list must not be misunderstood as a complete list.

                            Control0..1
                            BindingThe codes SHALL be taken from ListMode
                            (required to http://hl7.org/fhir/ValueSet/list-mode|4.0.1)

                            The processing mode that applies to this section.

                            Typecode
                            Is Modifierfalse
                            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                            Summaryfalse
                            Requirements

                            Sections are used in various ways, and it must be known in what way it is safe to use the entries in them.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            278. Composition.section:originalRepresentation.orderedBy
                            Definition

                            Specifies the order applied to the items in the section entries.

                            ShortOrder of section entries
                            Comments

                            Applications SHOULD render ordered lists in the order provided, but MAY allow users to re-order based on their own preferences as well. If there is no order specified, the order is unknown, though there may still be some order.

                            Control0..1
                            BindingThe codes SHOULD be taken from ListOrderCodes
                            (preferred to http://hl7.org/fhir/ValueSet/list-order)

                            What order applies to the items in the entry.

                            TypeCodeableConcept
                            Is Modifierfalse
                            Summaryfalse
                            Requirements

                            Important for presentation and rendering. Lists may be sorted to place more important information first or to group related entries.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            280. Composition.section:originalRepresentation.entry
                            Definition

                            A reference to the actual resource from which the narrative in the section is derived.

                            ShortAccording to the EPR ordonnance the PDF has to be in PDF/A-1 or PDF/A-2 format.
                            Comments

                            If there are no entries in the list, an emptyReason SHOULD be provided.

                            Control1..1
                            This element is affected by the following invariants: cmp-2
                            TypeReference(Binary)
                            Is Modifierfalse
                            Must Supporttrue
                            Summaryfalse
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            282. Composition.section:originalRepresentation.emptyReason
                            Definition

                            If the section is empty, why the list is empty. An empty section typically has some text explaining the empty reason.

                            ShortWhy the section is empty
                            Comments

                            The various reasons for an empty section make a significant interpretation to its interpretation. Note that this code is for use when the entire section content has been suppressed, and not for when individual items are omitted - implementers may consider using a text note or a flag on an entry in these cases.

                            Control0..1
                            This element is affected by the following invariants: cmp-2
                            BindingThe codes SHOULD be taken from ListEmptyReasons
                            (preferred to http://hl7.org/fhir/ValueSet/list-empty-reason)

                            If a section is empty, why it is empty.

                            TypeCodeableConcept
                            Is Modifierfalse
                            Summaryfalse
                            Requirements

                            Allows capturing things like "none exist" or "not asked" which can be important for most lists.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            284. Composition.section:originalRepresentation.section
                            Definition

                            A nested sub-section within this section.

                            ShortNested Section
                            Comments

                            Nested sections are primarily used to help human readers navigate to particular portions of the document.

                            Control0..0
                            This element is affected by the following invariants: cmp-1
                            TypeSeettp://hl7.org/fhir/StructureDefinition/Composition#Composition.section
                            Is Modifierfalse
                            Summaryfalse
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))