CH EPR FHIR (R4)
4.0.1-ballot - ballot Switzerland flag

This page is part of the CH EPR FHIR (R4) (v4.0.1-ballot: DSTU 4 Ballot 2) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions

Resource Profile: PpqmConsentTemplate201 - Detailed Descriptions

Active as of 2024-05-16

Definitions for the PpqmConsentTemplate201 resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Consent
Invariantsch-epr-ppqm-provision-actor-is-patient: The provision.actor and patient SHALL be the same (provision[0].actor.reference.identifier[0].value = patient.identifier.value)
2. Consent.identifier:templateId
Slice NametemplateId
NoteThis is a business identifier, not a resource identifier (see discussion)
4. Consent.identifier:templateId.value
Pattern Value201
6. Consent.policyRule
8. Consent.policyRule.coding
BindingThe codes SHALL be taken from CH PPQm Referenced Policy Set for Patients (201) and Representative (303) templates
(required to http://fhir.ch/ig/ch-epr-fhir/ValueSet/PpqmReferencedPolicySetFullAccess)
10. Consent.provision
12. Consent.provision.period
Control0..0
14. Consent.provision.actor
16. Consent.provision.actor.role
18. Consent.provision.actor.role.coding
Pattern Value{
  "system" : "urn:oid:2.16.756.5.30.1.127.3.10.6",
  "code" : "PAT"
}
20. Consent.provision.actor.reference
22. Consent.provision.actor.reference.identifier
NoteThis is a business identifier, not a resource identifier (see discussion)
TypeIdentifier(EPR-SPID Identifier)
24. Consent.provision.actor.reference.identifier.type
26. Consent.provision.actor.reference.identifier.type.coding
Pattern Value{
  "system" : "urn:ietf:rfc:3986",
  "code" : "urn:e-health-suisse:2015:epr-spid"
}
28. Consent.provision.actor.reference.display
Control0..0
30. Consent.provision.purpose
Control0..0

Guidance on how to interpret the contents of this table can be found here

0. Consent
Definition

A record of a healthcare consumer’s choices, which permits or denies identified recipient(s) or recipient role(s) to perform one or more actions within a given policy context, for specific purposes and periods of time.

ShortA healthcare consumer's choices to permit or deny recipients or roles to perform actions for specific purposes and periods of time
Comments

Broadly, there are 3 key areas of consent for patients: Consent around sharing information (aka Privacy Consent Directive - Authorization to Collect, Use, or Disclose information), consent for specific treatment, or kinds of treatment, and general advance care directives.

Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
ppc-1: Either a Policy or PolicyRule (policy.exists() or policyRule.exists())
ppc-2: IF Scope=privacy, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='patient-privacy').exists().not())
ppc-3: IF Scope=research, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='research').exists().not())
ppc-4: IF Scope=adr, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='adr').exists().not())
ppc-5: IF Scope=treatment, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='treatment').exists().not())
ch-epr-ppqm-template-structure: The resource shall correspond to one of official policy set templates (conformsTo('http://fhir.ch/ig/ch-epr-fhir/StructureDefinition/PpqmConsentTemplate201') or conformsTo('http://fhir.ch/ig/ch-epr-fhir/StructureDefinition/PpqmConsentTemplate202') or conformsTo('http://fhir.ch/ig/ch-epr-fhir/StructureDefinition/PpqmConsentTemplate203') or conformsTo('http://fhir.ch/ig/ch-epr-fhir/StructureDefinition/PpqmConsentTemplate301') or conformsTo('http://fhir.ch/ig/ch-epr-fhir/StructureDefinition/PpqmConsentTemplate302') or conformsTo('http://fhir.ch/ig/ch-epr-fhir/StructureDefinition/PpqmConsentTemplate303') or conformsTo('http://fhir.ch/ig/ch-epr-fhir/StructureDefinition/PpqmConsentTemplate304'))
ch-epr-ppqm-provision-actor-is-patient: The provision.actor and patient SHALL be the same (provision[0].actor.reference.identifier[0].value = patient.identifier.value)
ppc-1: Either a Policy or PolicyRule (policy.exists() or policyRule.exists())
ppc-2: IF Scope=privacy, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='patient-privacy').exists().not())
ppc-3: IF Scope=research, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='research').exists().not())
ppc-4: IF Scope=adr, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='adr').exists().not())
ppc-5: IF Scope=treatment, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='treatment').exists().not())
2. Consent.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Consent.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. Consent.identifier
Definition

Unique identifier for this copy of the Consent Statement.

ShortIdentifier for this record (external references)
Comments

This identifier identifies this copy of the consent. Where this identifier is also used elsewhere as the identifier for a consent record (e.g. a CDA consent document) then the consent details are expected to be the same.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control20..*
TypeIdentifier
Is Modifierfalse
Summarytrue
Example<br/><b>General</b>:{ "system" : "http://acme.org/identifier/local/eCMS", "value" : "Local eCMS identifier" }
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Consent.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • pattern @ type.coding
  • 8. Consent.identifier:policySetId
    Slice NamepolicySetId
    Definition

    Unique identifier for this copy of the Consent Statement.

    ShortUUID of the Policy SetIdentifier for this record (external references)
    Comments

    This identifier identifies this copy of the consent. Where this identifier is also used elsewhere as the identifier for a consent record (e.g. a CDA consent document) then the consent details are expected to be the same.

    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control10..1*
    TypeIdentifier
    Is Modifierfalse
    Summarytrue
    Example<br/><b>General</b>:{ "system" : "http://acme.org/identifier/local/eCMS", "value" : "Local eCMS identifier" }
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    10. Consent.identifier:policySetId.use
    Definition

    The purpose of this identifier.

    Shortusual | official | temp | secondary | old (If known)
    Comments

    Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

    Control0..01
    BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
    (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

    Identifies the purpose for this identifier, if known .

    Typecode
    Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    12. Consent.identifier:policySetId.type
    Definition

    A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

    ShortDescription of identifier
    Comments

    This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

    Control10..1
    BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codeshttp://hl7.org/fhir/ValueSet/identifier-type
    (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

    A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

    TypeCodeableConcept
    Is Modifierfalse
    Summarytrue
    Requirements

    Allows users to make use of identifiers when the identifier system is not known.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    14. Consent.identifier:policySetId.type.coding
    Definition

    A reference to a code defined by a terminology system.

    ShortCode defined by a terminology system
    Comments

    Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

    Control10..1*
    TypeCoding
    Is Modifierfalse
    Summarytrue
    Requirements

    Allows for alternative encodings within a code system, and translations to other code systems.

    Pattern Value{
      "system" : "http://fhir.ch/ig/ch-epr-fhir/CodeSystem/PpqmConsentIdentifierType",
      "code" : "policySetId"
    }
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    16. Consent.identifier:policySetId.system
    Definition

    Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

    ShortThe namespace for the identifier value
    Comments

    Identifier.system is always case sensitive.

    Control0..01
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

    Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    18. Consent.identifier:policySetId.value
    Definition

    The portion of the identifier typically relevant to the user and which is unique within the context of the system.

    ShortUUID of the policy set in URN formatThe value that is unique
    Comments

    If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

    Control10..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Example<br/><b>General</b>:123456
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ch-epr-ppqm-uuid-format: The policy set ID must be a UUID in URN format (lower().matches('^urn:uuid:[0-9a-f]{8}-[0-9a-f]{4}-[0-9a-f]{4}-[0-9a-f]{4}-[0-9a-f]{12}$'))
    20. Consent.identifier:policySetId.period
    Definition

    Time period during which identifier is/was valid for use.

    ShortTime period when id is/was valid for use
    Control0..01
    TypePeriod
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    22. Consent.identifier:policySetId.assigner
    Definition

    Organization that issued/manages the identifier.

    ShortOrganization that issued id (may be just text)
    Comments

    The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

    Control0..01
    TypeReference(Organization)
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    24. Consent.identifier:templateId
    Slice NametemplateId
    Definition

    Unique identifier for this copy of the Consent Statement.

    ShortTemplate ID of the policy setIdentifier for this record (external references)
    Comments

    This identifier identifies this copy of the consent. Where this identifier is also used elsewhere as the identifier for a consent record (e.g. a CDA consent document) then the consent details are expected to be the same.

    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control10..1*
    TypeIdentifier
    Is Modifierfalse
    Summarytrue
    Example<br/><b>General</b>:{ "system" : "http://acme.org/identifier/local/eCMS", "value" : "Local eCMS identifier" }
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    26. Consent.identifier:templateId.use
    Definition

    The purpose of this identifier.

    Shortusual | official | temp | secondary | old (If known)
    Comments

    Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

    Control0..01
    BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
    (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

    Identifies the purpose for this identifier, if known .

    Typecode
    Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    28. Consent.identifier:templateId.type
    Definition

    A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

    ShortDescription of identifier
    Comments

    This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

    Control10..1
    BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codeshttp://hl7.org/fhir/ValueSet/identifier-type
    (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

    A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

    TypeCodeableConcept
    Is Modifierfalse
    Summarytrue
    Requirements

    Allows users to make use of identifiers when the identifier system is not known.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    30. Consent.identifier:templateId.type.coding
    Definition

    A reference to a code defined by a terminology system.

    ShortCode defined by a terminology system
    Comments

    Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

    Control10..1*
    TypeCoding
    Is Modifierfalse
    Summarytrue
    Requirements

    Allows for alternative encodings within a code system, and translations to other code systems.

    Pattern Value{
      "system" : "http://fhir.ch/ig/ch-epr-fhir/CodeSystem/PpqmConsentIdentifierType",
      "code" : "templateId"
    }
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    32. Consent.identifier:templateId.system
    Definition

    Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

    ShortThe namespace for the identifier value
    Comments

    Identifier.system is always case sensitive.

    Control0..01
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

    Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    34. Consent.identifier:templateId.value
    Definition

    The portion of the identifier typically relevant to the user and which is unique within the context of the system.

    ShortTemplate ID of the policy setThe value that is unique
    Comments

    If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

    Control10..1
    BindingThe codes SHALL be taken from For codes, see CH PPQm Policy Set Template ID
    (required to http://fhir.ch/ig/ch-epr-fhir/ValueSet/PpqmPolicySetTemplateId)
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Pattern Value201
    Example<br/><b>General</b>:123456
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    36. Consent.identifier:templateId.period
    Definition

    Time period during which identifier is/was valid for use.

    ShortTime period when id is/was valid for use
    Control0..01
    TypePeriod
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    38. Consent.identifier:templateId.assigner
    Definition

    Organization that issued/manages the identifier.

    ShortOrganization that issued id (may be just text)
    Comments

    The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

    Control0..01
    TypeReference(Organization)
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    40. Consent.status
    Definition

    Indicates the current state of this consent.

    ShortFixed status valuedraft | proposed | active | rejected | inactive | entered-in-error
    Comments

    This element is labeled as a modifier because the status contains the codes rejected and entered-in-error that mark the Consent as not currently valid.

    Control1..1
    BindingThe codes SHALL be taken from ConsentStatehttp://hl7.org/fhir/ValueSet/consent-state-codes|4.0.1
    (required to http://hl7.org/fhir/ValueSet/consent-state-codes|4.0.1)

    Indicates the state of the consent.

    Typecode
    Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    The Consent Directive that is pointed to might be in various lifecycle states, e.g., a revoked Consent Directive.

    Pattern Valueactive
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    42. Consent.scope
    Definition

    A selector of the type of consent being presented: ADR, Privacy, Treatment, Research. This list is now extensible.

    ShortFixed scope valueWhich of the four areas this resource covers (extensible)
    Control1..1
    BindingUnless not suitable, these codes SHALL be taken from ConsentScopeCodeshttp://hl7.org/fhir/ValueSet/consent-scope
    (extensible to http://hl7.org/fhir/ValueSet/consent-scope)

    The four anticipated uses for the Consent Resource.

    TypeCodeableConcept
    Is Modifiertrue because Allows changes to codes based on scope selection
    Summarytrue
    Pattern Value{
      "coding" : [{
        "system" : "http://terminology.hl7.org/CodeSystem/consentscope",
        "code" : "patient-privacy"
      }]
    }
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    44. Consent.scope.coding
    Definition

    A reference to a code defined by a terminology system.

    ShortCode defined by a terminology system
    Comments

    Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

    Control10..1*
    TypeCoding
    Is Modifierfalse
    Summarytrue
    Requirements

    Allows for alternative encodings within a code system, and translations to other code systems.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    46. Consent.category
    Definition

    A classification of the type of consents found in the statement. This element supports indexing and retrieval of consent statements.

    ShortFixed category valueClassification of the consent statement - for indexing/retrieval
    Control1..1*
    BindingUnless not suitable, these codes SHALL be taken from ConsentCategoryCodeshttp://hl7.org/fhir/ValueSet/consent-category
    (extensible to http://hl7.org/fhir/ValueSet/consent-category)

    A classification of the type of consents found in a consent statement.

    TypeCodeableConcept
    Is Modifierfalse
    Summarytrue
    Pattern Value{
      "coding" : [{
        "system" : "http://terminology.hl7.org/CodeSystem/v3-ActCode",
        "code" : "INFA"
      }]
    }
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    48. Consent.category.coding
    Definition

    A reference to a code defined by a terminology system.

    ShortCode defined by a terminology system
    Comments

    Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

    Control10..1*
    TypeCoding
    Is Modifierfalse
    Summarytrue
    Requirements

    Allows for alternative encodings within a code system, and translations to other code systems.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    50. Consent.patient
    Definition

    The patient/healthcare consumer to whom this consent applies.

    ShortWho the consent applies to
    Comments

    Commonly, the patient the consent pertains to is the author, but for young and old people, it may be some other person.

    Control10..1
    TypeReference(Patient)
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    52. Consent.patient.reference
    Definition

    A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

    ShortLiteral reference, Relative, internal or absolute URL
    Comments

    Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

    Control0..01
    This element is affected by the following invariants: ref-1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    54. Consent.patient.type
    Definition

    The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

    The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

    ShortType the reference refers to (e.g. "Patient")
    Comments

    This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

    Control0..01
    BindingUnless not suitable, these codes SHALL be taken from ResourceTypehttp://hl7.org/fhir/ValueSet/resource-types
    (extensible to http://hl7.org/fhir/ValueSet/resource-types)

    Aa resource (or, for logical models, the URI of the logical model).

    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    56. Consent.patient.identifier
    Definition

    An identifier - identifies some entity uniquely and unambiguously. Typically this is used for business identifiers.


    An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

    ShortAn identifier intended for computationLogical reference, when literal reference is not known
    Comments

    When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

    When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

    Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

    Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control10..1
    This element is affected by the following invariants: ele-1
    TypeIdentifier(EPR-SPID Identifier)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    58. Consent.patient.identifier.use
    Definition

    The purpose of this identifier.

    Shortusual | official | temp | secondary | old (If known)
    Comments

    Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

    Control0..01
    BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
    (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

    Identifies the purpose for this identifier, if known .

    Typecode
    Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    60. Consent.patient.identifier.type
    Definition

    A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

    ShortDescription of identifier
    Comments

    This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

    Control0..01
    BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codeshttp://hl7.org/fhir/ValueSet/identifier-type
    (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

    A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

    TypeCodeableConcept
    Is Modifierfalse
    Summarytrue
    Requirements

    Allows users to make use of identifiers when the identifier system is not known.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    62. Consent.patient.identifier.system
    Definition

    Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

    ShortThe namespace for the identifier value
    Comments

    Identifier.system is always case sensitive.

    Control10..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

    Fixed Valueurn:oid:2.16.756.5.30.1.127.3.10.3
    Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    64. Consent.patient.identifier.value
    Definition

    The portion of the identifier typically relevant to the user and which is unique within the context of the system.

    ShortThe value that is unique
    Comments

    If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

    Control10..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Example<br/><b>General</b>:123456
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    epr-spid-length: EPR-SPID must be exactly 18 characters long (matches('^[0-9]{18}$'))
    epr-spid-startswith76133761: EPR-SPID must start with 76133761 (startsWith('76133761'))
    epr-spid-modulus-10: EPR-SPID must pass the modulus 10 check - https://www.gs1.org/services/how-calculate-check-digit-manually ((((10-((68+(substring(8,1).toInteger()*3)+(substring(9,1).toInteger()*1)+(substring(10,1).toInteger()*3)+(substring(11,1).toInteger()*1)+(substring(12,1).toInteger()*3)+(substring(13,1).toInteger()*1)+(substring(14,1).toInteger()*3)+(substring(15,1).toInteger()*1)+(substring(16,1).toInteger()*3))mod(10)))mod(10))=substring(17,1).toInteger()))
    66. Consent.patient.identifier.period
    Definition

    Time period during which identifier is/was valid for use.

    ShortTime period when id is/was valid for use
    Control0..01
    TypePeriod
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    68. Consent.patient.identifier.assigner
    Definition

    Organization that issued/manages the identifier.

    ShortOrganization that issued id (may be just text)
    Comments

    The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

    Control0..01
    TypeReference(Organization)
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    70. Consent.patient.display
    Definition

    Plain text narrative that identifies the resource in addition to the resource reference.

    ShortText alternative for the resource
    Comments

    This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

    Control0..01
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    72. Consent.dateTime
    Definition

    When this Consent was issued / created / indexed.

    ShortWhen this Consent was created or indexed
    Comments

    This is not the time of the original consent, but the time that this statement was made or derived.

    Control0..01
    TypedateTime
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    74. Consent.performer
    Definition

    Either the Grantor, which is the entity responsible for granting the rights listed in a Consent Directive or the Grantee, which is the entity responsible for complying with the Consent Directive, including any obligations or limitations on authorizations and enforcement of prohibitions.

    ShortWho is agreeing to the policy and rules
    Comments

    Commonly, the patient the consent pertains to is the consentor, but particularly for young and old people, it may be some other person - e.g. a legal guardian.

    Control0..0*
    TypeReference(Organization, Patient, Practitioner, RelatedPerson, PractitionerRole)
    Is Modifierfalse
    Summarytrue
    Alternate Namesconsentor
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    76. Consent.organization
    Definition

    The organization that manages the consent, and the framework within which it is executed.

    ShortCustodian of the consent
    Control0..0*
    TypeReference(Organization)
    Is Modifierfalse
    Summarytrue
    Alternate Namescustodian
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    78. Consent.source[x]
    Definition

    The source on which this consent statement is based. The source might be a scanned original paper form, or a reference to a consent that links back to such a source, a reference to a document repository (e.g. XDS) that stores the original consent document.

    ShortSource from which this consent is taken
    Comments

    The source can be contained inline (Attachment), referenced directly (Consent), referenced in a consent repository (DocumentReference), or simply by an identifier (Identifier), e.g. a CDA document id.

    Control0..01
    TypeChoice of: Attachment, Reference(Consent, DocumentReference, Contract, QuestionnaireResponse)
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    80. Consent.policy
    Definition

    The references to the policies that are included in this consent scope. Policies may be organizational, but are often defined jurisdictionally, or in law.

    ShortPolicies covered by this consent
    Control0..0*
    TypeBackboneElement
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    83. Consent.policyRule
    Definition

    A reference to the specific base computable regulation or policy.

    ShortID of the referenced basis policy setRegulation that this consents to
    Comments

    If the policyRule is absent, computable consent would need to be constructed from the elements of the Consent resource.

    Control10..1
    This element is affected by the following invariants: ppc-1
    BindingUnless not suitable, these codes SHALL be taken from ConsentPolicyRuleCodeshttp://hl7.org/fhir/ValueSet/consent-policy
    (extensible to http://hl7.org/fhir/ValueSet/consent-policy)

    Regulatory policy examples.

    TypeCodeableConcept
    Is Modifierfalse
    Summarytrue
    Requirements

    Might be a unique identifier of a policy set in XACML, or other rules engine.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    85. Consent.policyRule.coding
    Definition

    A reference to a code defined by a terminology system.

    ShortCode defined by a terminology system
    Comments

    Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

    Control10..1*
    BindingThe codes SHALL be taken from For codes, see CH PPQm Referenced Policy Set for Patients (201) and Representative (303) templates
    (required to http://fhir.ch/ig/ch-epr-fhir/ValueSet/PpqmReferencedPolicySetFullAccess)
    TypeCoding
    Is Modifierfalse
    Summarytrue
    Requirements

    Allows for alternative encodings within a code system, and translations to other code systems.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    87. Consent.policyRule.coding.system
    Definition

    The identification of the code system that defines the meaning of the symbol in the code.

    ShortIdentity of the terminology system
    Comments

    The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

    Control10..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    Need to be unambiguous about the source of the definition of the symbol.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    89. Consent.policyRule.coding.version
    Definition

    The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

    ShortVersion of the system - if relevant
    Comments

    Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

    NoteThis is a business version Id, not a resource version Id (see discussion)
    Control0..01
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    91. Consent.policyRule.coding.code
    Definition

    A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

    ShortSymbol in syntax defined by the system
    Control10..1
    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    Need to refer to a particular code in the system.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    93. Consent.policyRule.coding.userSelected
    Definition

    Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

    ShortIf this coding was chosen directly by the user
    Comments

    Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

    Control0..01
    Typeboolean
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    95. Consent.verification
    Definition

    Whether a treatment instruction (e.g. artificial respiration yes or no) was verified with the patient, his/her family or another authorized person.

    ShortConsent Verified by patient or family
    Control0..0*
    TypeBackboneElement
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    99. Consent.provision
    Definition

    An exception to the base policy of this consent. An exception can be an addition or removal of access permissions.

    ShortConstraints to the base Consent.policyRule
    Control10..1
    TypeBackboneElement
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    101. Consent.provision.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    103. Consent.provision.type
    Definition

    Action to take - permit or deny - when the rule conditions are met. Not permitted in root rule, required in all nested rules.

    Shortdeny | permit
    Control0..01
    BindingThe codes SHALL be taken from ConsentProvisionTypehttp://hl7.org/fhir/ValueSet/consent-provision-type|4.0.1
    (required to http://hl7.org/fhir/ValueSet/consent-provision-type|4.0.1)

    How a rule statement is applied, such as adding additional consent or removing consent.

    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    105. Consent.provision.period
    Definition

    The timeframe in this rule is valid.

    ShortTimeframe for this rule
    Control0..01
    TypePeriod
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    108. Consent.provision.actor
    Definition

    Who or what is controlled by this rule. Use group to identify a set of actors by some property they share (e.g. 'admitting officers').

    ShortWho|what controlled by this rule (or group, by role)
    Control10..1*
    TypeBackboneElement
    Is Modifierfalse
    Summaryfalse
    Meaning if MissingThere is no specific actor associated with the exception
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    110. Consent.provision.actor.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    112. Consent.provision.actor.role
    Definition

    How the individual is involved in the resources content that is described in the exception.

    ShortHow the actor is involved
    Control1..1
    BindingThe codes SHALL be taken from Unless not suitable, these codes SHALL be taken from EprRolehttp://hl7.org/fhir/ValueSet/security-role-type
    (required to http://fhir.ch/ig/ch-term/ValueSet/EprRole)
    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    114. Consent.provision.actor.role.coding
    Definition

    A reference to a code defined by a terminology system.

    ShortCode defined by a terminology system
    Comments

    Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

    Control0..*
    TypeCoding
    Is Modifierfalse
    Summarytrue
    Requirements

    Allows for alternative encodings within a code system, and translations to other code systems.

    Pattern Value{
      "system" : "urn:oid:2.16.756.5.30.1.127.3.10.6",
      "code" : "PAT"
    }
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    116. Consent.provision.actor.role.coding.system
    Definition

    The identification of the code system that defines the meaning of the symbol in the code.

    ShortIdentity of the terminology system
    Comments

    The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

    Control10..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    Need to be unambiguous about the source of the definition of the symbol.

    Pattern Valueurn:oid:2.16.756.5.30.1.127.3.10.6
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    118. Consent.provision.actor.role.coding.code
    Definition

    A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

    ShortEPR actor role codeSymbol in syntax defined by the system
    Control10..1
    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    Need to refer to a particular code in the system.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    120. Consent.provision.actor.reference
    Definition

    The resource that identifies the actor. To identify actors by type, use group to identify a set of actors by some property they share (e.g. 'admitting officers').

    ShortResource for the actor (or group, by role)
    Control1..1
    TypeReference(Device, Group, CareTeam, Organization, Patient, Practitioner, RelatedPerson, PractitionerRole)
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    122. Consent.provision.actor.reference.reference
    Definition

    A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

    ShortLiteral reference, Relative, internal or absolute URL
    Comments

    Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

    Control0..01
    This element is affected by the following invariants: ref-1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    124. Consent.provision.actor.reference.type
    Definition

    The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

    The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

    ShortType the reference refers to (e.g. "Patient")
    Comments

    This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

    Control0..01
    BindingUnless not suitable, these codes SHALL be taken from ResourceTypehttp://hl7.org/fhir/ValueSet/resource-types
    (extensible to http://hl7.org/fhir/ValueSet/resource-types)

    Aa resource (or, for logical models, the URI of the logical model).

    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    126. Consent.provision.actor.reference.identifier
    Definition

    An identifier - identifies some entity uniquely and unambiguously. Typically this is used for business identifiers.


    An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

    ShortAn identifier intended for computationLogical reference, when literal reference is not known
    Comments

    When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

    When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

    Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

    Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control0..1
    This element is affected by the following invariants: ele-1
    TypeIdentifier(EPR-SPID Identifier)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    128. Consent.provision.actor.reference.identifier.use
    Definition

    The purpose of this identifier.

    Shortusual | official | temp | secondary | old (If known)
    Comments

    Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

    Control0..01
    BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
    (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

    Identifies the purpose for this identifier, if known .

    Typecode
    Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    130. Consent.provision.actor.reference.identifier.type
    Definition

    A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

    ShortDescription of identifier
    Comments

    This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

    Control10..1
    BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codeshttp://hl7.org/fhir/ValueSet/identifier-type
    (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

    A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

    TypeCodeableConcept
    Is Modifierfalse
    Summarytrue
    Requirements

    Allows users to make use of identifiers when the identifier system is not known.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    132. Consent.provision.actor.reference.identifier.type.coding
    Definition

    A reference to a code defined by a terminology system.

    ShortCode defined by a terminology system
    Comments

    Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

    Control10..1*
    BindingThe codes SHALL be taken from For codes, see CH PPQm Actor Identifier Type
    (required to http://fhir.ch/ig/ch-epr-fhir/ValueSet/PpqmActorIdentifierType)
    TypeCoding
    Is Modifierfalse
    Summarytrue
    Requirements

    Allows for alternative encodings within a code system, and translations to other code systems.

    Pattern Value{
      "system" : "urn:ietf:rfc:3986",
      "code" : "urn:e-health-suisse:2015:epr-spid"
    }
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    134. Consent.provision.actor.reference.identifier.type.coding.system
    Definition

    The identification of the code system that defines the meaning of the symbol in the code.

    ShortIdentity of the terminology system
    Comments

    The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

    Control10..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    Need to be unambiguous about the source of the definition of the symbol.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    136. Consent.provision.actor.reference.identifier.type.coding.version
    Definition

    The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

    ShortVersion of the system - if relevant
    Comments

    Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

    NoteThis is a business version Id, not a resource version Id (see discussion)
    Control0..01
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    138. Consent.provision.actor.reference.identifier.type.coding.code
    Definition

    A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

    ShortActor identifier type code (name qualifier)Symbol in syntax defined by the system
    Control10..1
    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    Need to refer to a particular code in the system.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    140. Consent.provision.actor.reference.identifier.type.coding.userSelected
    Definition

    Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

    ShortIf this coding was chosen directly by the user
    Comments

    Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

    Control0..01
    Typeboolean
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    142. Consent.provision.actor.reference.identifier.type.text
    Definition

    A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

    ShortPlain text representation of the concept
    Comments

    Very often the text is the same as a displayName of one of the codings.

    Control0..01
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    144. Consent.provision.actor.reference.identifier.value
    Definition

    The portion of the identifier typically relevant to the user and which is unique within the context of the system.

    ShortID of an healthcare professional, group of healthcare professionals, patient, or representativeThe value that is unique
    Comments

    If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

    Control10..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Example<br/><b>General</b>:123456
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    146. Consent.provision.actor.reference.identifier.period
    Definition

    Time period during which identifier is/was valid for use.

    ShortTime period when id is/was valid for use
    Control0..01
    TypePeriod
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    148. Consent.provision.actor.reference.identifier.assigner
    Definition

    Organization that issued/manages the identifier.

    ShortOrganization that issued id (may be just text)
    Comments

    The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

    Control0..01
    TypeReference(Organization)
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    150. Consent.provision.actor.reference.display
    Definition

    Plain text narrative that identifies the resource in addition to the resource reference.

    ShortThis element is present only in policy sets which reference indefinite sets of actorsText alternative for the resource
    Comments

    This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

    Control0..01
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    152. Consent.provision.action
    Definition

    Actions controlled by this Rule.

    ShortActions controlled by this rule
    Comments

    Note that this is the direct action (not the grounds for the action covered in the purpose element). At present, the only action in the understood and tested scope of this resource is 'read'.

    Control0..0*
    BindingFor example codes, see ConsentActionCodeshttp://hl7.org/fhir/ValueSet/consent-action
    (example to http://hl7.org/fhir/ValueSet/consent-action)

    Detailed codes for the consent action.

    TypeCodeableConcept
    Is Modifierfalse
    Summarytrue
    Meaning if Missingall actions
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    154. Consent.provision.securityLabel
    Definition

    A security label, comprised of 0..* security label fields (Privacy tags), which define which resources are controlled by this exception.

    ShortSecurity Labels that define affected resources
    Comments

    If the consent specifies a security label of "R" then it applies to all resources that are labeled "R" or lower. E.g. for Confidentiality, it's a high water mark. For other kinds of security labels, subsumption logic applies. When the purpose of use tag is on the data, access request purpose of use shall not conflict.

    Control0..0*
    BindingUnless not suitable, these codes SHALL be taken from All Security Labelshttp://hl7.org/fhir/ValueSet/security-labels
    (extensible to http://hl7.org/fhir/ValueSet/security-labels)

    Security Labels from the Healthcare Privacy and Security Classification System.

    TypeCoding
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    156. Consent.provision.purpose
    Definition

    The context of the activities a user is taking - why the user is accessing the data - that are controlled by this rule.

    ShortContext of activities covered by this rule
    Comments

    When the purpose of use tag is on the data, access request purpose of use shall not conflict.

    Control0..0*
    BindingThe codes SHALL be taken from Unless not suitable, these codes SHALL be taken from EprPurposeOfUsehttp://terminology.hl7.org/ValueSet/v3-PurposeOfUse
    (required to http://fhir.ch/ig/ch-term/ValueSet/EprPurposeOfUse)
    TypeCoding
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    160. Consent.provision.class
    Definition

    The class of information covered by this rule. The type can be a FHIR resource type, a profile on a type, or a CDA document, or some other type that indicates what sort of information the consent relates to.

    Shorte.g. Resource Type, Profile, CDA, etc.
    Comments

    Multiple types are or'ed together. The intention of the contentType element is that the codes refer to profiles or document types defined in a standard or an implementation guide somewhere.

    Control0..0*
    BindingUnless not suitable, these codes SHALL be taken from ConsentContentClasshttp://hl7.org/fhir/ValueSet/consent-content-class
    (extensible to http://hl7.org/fhir/ValueSet/consent-content-class)

    The class (type) of information a consent rule covers.

    TypeCoding
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    162. Consent.provision.code
    Definition

    If this code is found in an instance, then the rule applies.

    Shorte.g. LOINC or SNOMED CT code, etc. in the content
    Comments

    Typical use of this is a Document code with class = CDA.

    Control0..0*
    BindingFor example codes, see ConsentContentCodeshttp://hl7.org/fhir/ValueSet/consent-content-code
    (example to http://hl7.org/fhir/ValueSet/consent-content-code)

    If this code is found in an instance, then the exception applies.

    TypeCodeableConcept
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    164. Consent.provision.dataPeriod
    Definition

    Clinical or Operational Relevant period of time that bounds the data controlled by this rule.

    ShortTimeframe for data controlled by this rule
    Comments

    This has a different sense to the Consent.period - that is when the consent agreement holds. This is the time period of the data that is controlled by the agreement.

    Control0..01
    TypePeriod
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    166. Consent.provision.data
    Definition

    The resources controlled by this rule if specific resources are referenced.

    ShortData controlled by this rule
    Control0..0*
    TypeBackboneElement
    Is Modifierfalse
    Summarytrue
    Meaning if Missingall data
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    171. Consent.provision.provision
    Definition

    Rules which provide exceptions to the base rule or subrules.

    ShortNested Exception Rules
    Control0..0*
    TypeSee ttp://hl7.org/fhir/StructureDefinition/Consent#Consent.provision
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

    Guidance on how to interpret the contents of this table can be found here

    0. Consent
    Definition

    A record of a healthcare consumer’s choices, which permits or denies identified recipient(s) or recipient role(s) to perform one or more actions within a given policy context, for specific purposes and periods of time.

    ShortA healthcare consumer's choices to permit or deny recipients or roles to perform actions for specific purposes and periods of time
    Comments

    Broadly, there are 3 key areas of consent for patients: Consent around sharing information (aka Privacy Consent Directive - Authorization to Collect, Use, or Disclose information), consent for specific treatment, or kinds of treatment, and general advance care directives.

    Control0..*
    Is Modifierfalse
    Summaryfalse
    Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
    dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
    dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
    dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
    dom-6: A resource should have narrative for robust management (text.`div`.exists())
    ppc-1: Either a Policy or PolicyRule (policy.exists() or policyRule.exists())
    ppc-2: IF Scope=privacy, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='patient-privacy').exists().not())
    ppc-3: IF Scope=research, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='research').exists().not())
    ppc-4: IF Scope=adr, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='adr').exists().not())
    ppc-5: IF Scope=treatment, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='treatment').exists().not())
    ch-epr-ppqm-template-structure: The resource shall correspond to one of official policy set templates (conformsTo('http://fhir.ch/ig/ch-epr-fhir/StructureDefinition/PpqmConsentTemplate201') or conformsTo('http://fhir.ch/ig/ch-epr-fhir/StructureDefinition/PpqmConsentTemplate202') or conformsTo('http://fhir.ch/ig/ch-epr-fhir/StructureDefinition/PpqmConsentTemplate203') or conformsTo('http://fhir.ch/ig/ch-epr-fhir/StructureDefinition/PpqmConsentTemplate301') or conformsTo('http://fhir.ch/ig/ch-epr-fhir/StructureDefinition/PpqmConsentTemplate302') or conformsTo('http://fhir.ch/ig/ch-epr-fhir/StructureDefinition/PpqmConsentTemplate303') or conformsTo('http://fhir.ch/ig/ch-epr-fhir/StructureDefinition/PpqmConsentTemplate304'))
    ch-epr-ppqm-provision-actor-is-patient: The provision.actor and patient SHALL be the same (provision[0].actor.reference.identifier[0].value = patient.identifier.value)
    2. Consent.id
    Definition

    The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

    ShortLogical id of this artifact
    Comments

    The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

    Control0..1
    Typeid
    Is Modifierfalse
    Summarytrue
    4. Consent.meta
    Definition

    The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

    ShortMetadata about the resource
    Control0..1
    TypeMeta
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    6. Consent.implicitRules
    Definition

    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

    ShortA set of rules under which this content was created
    Comments

    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

    Control0..1
    Typeuri
    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    8. Consent.language
    Definition

    The base language in which the resource is written.

    ShortLanguage of the resource content
    Comments

    Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

    Control0..1
    BindingThe codes SHOULD be taken from CommonLanguages
    (preferred to http://hl7.org/fhir/ValueSet/languages)

    A human language.

    Additional BindingsPurpose
    AllLanguagesMax Binding
    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    10. Consent.text
    Definition

    A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

    ShortText summary of the resource, for human interpretation
    Comments

    Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

    Control0..1
    TypeNarrative
    Is Modifierfalse
    Summaryfalse
    Alternate Namesnarrative, html, xhtml, display
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    12. Consent.contained
    Definition

    These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

    ShortContained, inline Resources
    Comments

    This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

    Control0..*
    TypeResource
    Is Modifierfalse
    Summaryfalse
    Alternate Namesinline resources, anonymous resources, contained resources
    14. Consent.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    16. Consent.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Summaryfalse
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    18. Consent.identifier
    Definition

    Unique identifier for this copy of the Consent Statement.

    ShortIdentifier for this record (external references)
    Comments

    This identifier identifies this copy of the consent. Where this identifier is also used elsewhere as the identifier for a consent record (e.g. a CDA consent document) then the consent details are expected to be the same.

    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control2..*
    TypeIdentifier
    Is Modifierfalse
    Summarytrue
    Example<br/><b>General</b>:{ "system" : "http://acme.org/identifier/local/eCMS", "value" : "Local eCMS identifier" }
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    SlicingThis element introduces a set of slices on Consent.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • pattern @ type.coding
    • 20. Consent.identifier:policySetId
      Slice NamepolicySetId
      Definition

      Unique identifier for this copy of the Consent Statement.

      ShortUUID of the Policy Set
      Comments

      This identifier identifies this copy of the consent. Where this identifier is also used elsewhere as the identifier for a consent record (e.g. a CDA consent document) then the consent details are expected to be the same.

      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control1..1
      TypeIdentifier
      Is Modifierfalse
      Summarytrue
      Example<br/><b>General</b>:{ "system" : "http://acme.org/identifier/local/eCMS", "value" : "Local eCMS identifier" }
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      22. Consent.identifier:policySetId.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      24. Consent.identifier:policySetId.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on Consent.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 26. Consent.identifier:policySetId.use
        Definition

        The purpose of this identifier.

        Shortusual | official | temp | secondary | old (If known)
        Comments

        Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

        Control0..0
        BindingThe codes SHALL be taken from IdentifierUse
        (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

        Identifies the purpose for this identifier, if known .

        Typecode
        Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        28. Consent.identifier:policySetId.type
        Definition

        A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

        ShortDescription of identifier
        Comments

        This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

        Control1..1
        BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
        (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

        A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

        TypeCodeableConcept
        Is Modifierfalse
        Summarytrue
        Requirements

        Allows users to make use of identifiers when the identifier system is not known.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        30. Consent.identifier:policySetId.type.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        32. Consent.identifier:policySetId.type.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on Consent.identifier.type.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 34. Consent.identifier:policySetId.type.coding
          Definition

          A reference to a code defined by a terminology system.

          ShortCode defined by a terminology system
          Comments

          Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

          Control1..1
          TypeCoding
          Is Modifierfalse
          Summarytrue
          Requirements

          Allows for alternative encodings within a code system, and translations to other code systems.

          Pattern Value{
            "system" : "http://fhir.ch/ig/ch-epr-fhir/CodeSystem/PpqmConsentIdentifierType",
            "code" : "policySetId"
          }
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          36. Consent.identifier:policySetId.type.text
          Definition

          A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

          ShortPlain text representation of the concept
          Comments

          Very often the text is the same as a displayName of one of the codings.

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          38. Consent.identifier:policySetId.system
          Definition

          Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

          ShortThe namespace for the identifier value
          Comments

          Identifier.system is always case sensitive.

          Control0..0
          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

          Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          40. Consent.identifier:policySetId.value
          Definition

          The portion of the identifier typically relevant to the user and which is unique within the context of the system.

          ShortUUID of the policy set in URN format
          Comments

          If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

          Control1..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Example<br/><b>General</b>:123456
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ch-epr-ppqm-uuid-format: The policy set ID must be a UUID in URN format (lower().matches('^urn:uuid:[0-9a-f]{8}-[0-9a-f]{4}-[0-9a-f]{4}-[0-9a-f]{4}-[0-9a-f]{12}$'))
          42. Consent.identifier:policySetId.period
          Definition

          Time period during which identifier is/was valid for use.

          ShortTime period when id is/was valid for use
          Control0..0
          TypePeriod
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          44. Consent.identifier:policySetId.assigner
          Definition

          Organization that issued/manages the identifier.

          ShortOrganization that issued id (may be just text)
          Comments

          The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

          Control0..0
          TypeReference(Organization)
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          46. Consent.identifier:templateId
          Slice NametemplateId
          Definition

          Unique identifier for this copy of the Consent Statement.

          ShortTemplate ID of the policy set
          Comments

          This identifier identifies this copy of the consent. Where this identifier is also used elsewhere as the identifier for a consent record (e.g. a CDA consent document) then the consent details are expected to be the same.

          NoteThis is a business identifier, not a resource identifier (see discussion)
          Control1..1
          TypeIdentifier
          Is Modifierfalse
          Summarytrue
          Example<br/><b>General</b>:{ "system" : "http://acme.org/identifier/local/eCMS", "value" : "Local eCMS identifier" }
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          48. Consent.identifier:templateId.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          50. Consent.identifier:templateId.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on Consent.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 52. Consent.identifier:templateId.use
            Definition

            The purpose of this identifier.

            Shortusual | official | temp | secondary | old (If known)
            Comments

            Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

            Control0..0
            BindingThe codes SHALL be taken from IdentifierUse
            (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

            Identifies the purpose for this identifier, if known .

            Typecode
            Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            54. Consent.identifier:templateId.type
            Definition

            A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

            ShortDescription of identifier
            Comments

            This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

            Control1..1
            BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
            (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

            A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

            TypeCodeableConcept
            Is Modifierfalse
            Summarytrue
            Requirements

            Allows users to make use of identifiers when the identifier system is not known.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            56. Consent.identifier:templateId.type.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            58. Consent.identifier:templateId.type.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on Consent.identifier.type.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 60. Consent.identifier:templateId.type.coding
              Definition

              A reference to a code defined by a terminology system.

              ShortCode defined by a terminology system
              Comments

              Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

              Control1..1
              TypeCoding
              Is Modifierfalse
              Summarytrue
              Requirements

              Allows for alternative encodings within a code system, and translations to other code systems.

              Pattern Value{
                "system" : "http://fhir.ch/ig/ch-epr-fhir/CodeSystem/PpqmConsentIdentifierType",
                "code" : "templateId"
              }
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              62. Consent.identifier:templateId.type.text
              Definition

              A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

              ShortPlain text representation of the concept
              Comments

              Very often the text is the same as a displayName of one of the codings.

              Control0..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Requirements

              The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              64. Consent.identifier:templateId.system
              Definition

              Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

              ShortThe namespace for the identifier value
              Comments

              Identifier.system is always case sensitive.

              Control0..0
              Typeuri
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Requirements

              There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

              Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              66. Consent.identifier:templateId.value
              Definition

              The portion of the identifier typically relevant to the user and which is unique within the context of the system.

              ShortTemplate ID of the policy set
              Comments

              If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

              Control1..1
              BindingThe codes SHALL be taken from CH PPQm Policy Set Template ID
              (required to http://fhir.ch/ig/ch-epr-fhir/ValueSet/PpqmPolicySetTemplateId)
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Pattern Value201
              Example<br/><b>General</b>:123456
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              68. Consent.identifier:templateId.period
              Definition

              Time period during which identifier is/was valid for use.

              ShortTime period when id is/was valid for use
              Control0..0
              TypePeriod
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              70. Consent.identifier:templateId.assigner
              Definition

              Organization that issued/manages the identifier.

              ShortOrganization that issued id (may be just text)
              Comments

              The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

              Control0..0
              TypeReference(Organization)
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              72. Consent.status
              Definition

              Indicates the current state of this consent.

              ShortFixed status value
              Comments

              This element is labeled as a modifier because the status contains the codes rejected and entered-in-error that mark the Consent as not currently valid.

              Control1..1
              BindingThe codes SHALL be taken from ConsentState
              (required to http://hl7.org/fhir/ValueSet/consent-state-codes|4.0.1)

              Indicates the state of the consent.

              Typecode
              Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Requirements

              The Consent Directive that is pointed to might be in various lifecycle states, e.g., a revoked Consent Directive.

              Pattern Valueactive
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              74. Consent.scope
              Definition

              A selector of the type of consent being presented: ADR, Privacy, Treatment, Research. This list is now extensible.

              ShortFixed scope value
              Control1..1
              BindingUnless not suitable, these codes SHALL be taken from ConsentScopeCodes
              (extensible to http://hl7.org/fhir/ValueSet/consent-scope)

              The four anticipated uses for the Consent Resource.

              TypeCodeableConcept
              Is Modifiertrue because Allows changes to codes based on scope selection
              Summarytrue
              Pattern Value{
                "coding" : [{
                  "system" : "http://terminology.hl7.org/CodeSystem/consentscope",
                  "code" : "patient-privacy"
                }]
              }
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              76. Consent.scope.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              78. Consent.scope.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              SlicingThis element introduces a set of slices on Consent.scope.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 80. Consent.scope.coding
                Definition

                A reference to a code defined by a terminology system.

                ShortCode defined by a terminology system
                Comments

                Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                Control1..1
                TypeCoding
                Is Modifierfalse
                Summarytrue
                Requirements

                Allows for alternative encodings within a code system, and translations to other code systems.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                82. Consent.scope.text
                Definition

                A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                ShortPlain text representation of the concept
                Comments

                Very often the text is the same as a displayName of one of the codings.

                Control0..1
                Typestring
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Requirements

                The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                84. Consent.category
                Definition

                A classification of the type of consents found in the statement. This element supports indexing and retrieval of consent statements.

                ShortFixed category value
                Control1..1
                BindingUnless not suitable, these codes SHALL be taken from ConsentCategoryCodes
                (extensible to http://hl7.org/fhir/ValueSet/consent-category)

                A classification of the type of consents found in a consent statement.

                TypeCodeableConcept
                Is Modifierfalse
                Summarytrue
                Pattern Value{
                  "coding" : [{
                    "system" : "http://terminology.hl7.org/CodeSystem/v3-ActCode",
                    "code" : "INFA"
                  }]
                }
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                86. Consent.category.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                88. Consent.category.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                SlicingThis element introduces a set of slices on Consent.category.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ url
                • 90. Consent.category.coding
                  Definition

                  A reference to a code defined by a terminology system.

                  ShortCode defined by a terminology system
                  Comments

                  Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                  Control1..1
                  TypeCoding
                  Is Modifierfalse
                  Summarytrue
                  Requirements

                  Allows for alternative encodings within a code system, and translations to other code systems.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  92. Consent.category.text
                  Definition

                  A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                  ShortPlain text representation of the concept
                  Comments

                  Very often the text is the same as a displayName of one of the codings.

                  Control0..1
                  Typestring
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Requirements

                  The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  94. Consent.patient
                  Definition

                  The patient/healthcare consumer to whom this consent applies.

                  ShortWho the consent applies to
                  Comments

                  Commonly, the patient the consent pertains to is the author, but for young and old people, it may be some other person.

                  Control1..1
                  TypeReference(Patient)
                  Is Modifierfalse
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  96. Consent.patient.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  98. Consent.patient.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  SlicingThis element introduces a set of slices on Consent.patient.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • value @ url
                  • 100. Consent.patient.reference
                    Definition

                    A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

                    ShortLiteral reference, Relative, internal or absolute URL
                    Comments

                    Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

                    Control0..0
                    This element is affected by the following invariants: ref-1
                    Typestring
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    102. Consent.patient.type
                    Definition

                    The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

                    The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

                    ShortType the reference refers to (e.g. "Patient")
                    Comments

                    This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

                    Control0..0
                    BindingUnless not suitable, these codes SHALL be taken from ResourceType
                    (extensible to http://hl7.org/fhir/ValueSet/resource-types)

                    Aa resource (or, for logical models, the URI of the logical model).

                    Typeuri
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    104. Consent.patient.identifier
                    Definition

                    An identifier - identifies some entity uniquely and unambiguously. Typically this is used for business identifiers.

                    ShortAn identifier intended for computation
                    Comments

                    When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

                    When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

                    Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

                    Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

                    NoteThis is a business identifier, not a resource identifier (see discussion)
                    Control1..1
                    This element is affected by the following invariants: ele-1
                    TypeIdentifier(EPR-SPID Identifier)
                    Is Modifierfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    106. Consent.patient.identifier.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    108. Consent.patient.identifier.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    SlicingThis element introduces a set of slices on Consent.patient.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                    • value @ url
                    • 110. Consent.patient.identifier.use
                      Definition

                      The purpose of this identifier.

                      Shortusual | official | temp | secondary | old (If known)
                      Comments

                      Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

                      Control0..0
                      BindingThe codes SHALL be taken from IdentifierUse
                      (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

                      Identifies the purpose for this identifier, if known .

                      Typecode
                      Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Requirements

                      Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      112. Consent.patient.identifier.type
                      Definition

                      A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

                      ShortDescription of identifier
                      Comments

                      This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

                      Control0..0
                      BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
                      (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

                      A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Summarytrue
                      Requirements

                      Allows users to make use of identifiers when the identifier system is not known.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      114. Consent.patient.identifier.system
                      Definition

                      Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

                      ShortThe namespace for the identifier value
                      Comments

                      Identifier.system is always case sensitive.

                      Control1..1
                      Typeuri
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Requirements

                      There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

                      Fixed Valueurn:oid:2.16.756.5.30.1.127.3.10.3
                      Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      116. Consent.patient.identifier.value
                      Definition

                      The portion of the identifier typically relevant to the user and which is unique within the context of the system.

                      ShortThe value that is unique
                      Comments

                      If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

                      Control1..1
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Example<br/><b>General</b>:123456
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      epr-spid-length: EPR-SPID must be exactly 18 characters long (matches('^[0-9]{18}$'))
                      epr-spid-startswith76133761: EPR-SPID must start with 76133761 (startsWith('76133761'))
                      epr-spid-modulus-10: EPR-SPID must pass the modulus 10 check - https://www.gs1.org/services/how-calculate-check-digit-manually ((((10-((68+(substring(8,1).toInteger()*3)+(substring(9,1).toInteger()*1)+(substring(10,1).toInteger()*3)+(substring(11,1).toInteger()*1)+(substring(12,1).toInteger()*3)+(substring(13,1).toInteger()*1)+(substring(14,1).toInteger()*3)+(substring(15,1).toInteger()*1)+(substring(16,1).toInteger()*3))mod(10)))mod(10))=substring(17,1).toInteger()))
                      118. Consent.patient.identifier.period
                      Definition

                      Time period during which identifier is/was valid for use.

                      ShortTime period when id is/was valid for use
                      Control0..0
                      TypePeriod
                      Is Modifierfalse
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      120. Consent.patient.identifier.assigner
                      Definition

                      Organization that issued/manages the identifier.

                      ShortOrganization that issued id (may be just text)
                      Comments

                      The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

                      Control0..0
                      TypeReference(Organization)
                      Is Modifierfalse
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      122. Consent.patient.display
                      Definition

                      Plain text narrative that identifies the resource in addition to the resource reference.

                      ShortText alternative for the resource
                      Comments

                      This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

                      Control0..0
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      124. Consent.dateTime
                      Definition

                      When this Consent was issued / created / indexed.

                      ShortWhen this Consent was created or indexed
                      Comments

                      This is not the time of the original consent, but the time that this statement was made or derived.

                      Control0..0
                      TypedateTime
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      126. Consent.performer
                      Definition

                      Either the Grantor, which is the entity responsible for granting the rights listed in a Consent Directive or the Grantee, which is the entity responsible for complying with the Consent Directive, including any obligations or limitations on authorizations and enforcement of prohibitions.

                      ShortWho is agreeing to the policy and rules
                      Comments

                      Commonly, the patient the consent pertains to is the consentor, but particularly for young and old people, it may be some other person - e.g. a legal guardian.

                      Control0..0
                      TypeReference(Organization, Patient, Practitioner, RelatedPerson, PractitionerRole)
                      Is Modifierfalse
                      Summarytrue
                      Alternate Namesconsentor
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      128. Consent.organization
                      Definition

                      The organization that manages the consent, and the framework within which it is executed.

                      ShortCustodian of the consent
                      Control0..0
                      TypeReference(Organization)
                      Is Modifierfalse
                      Summarytrue
                      Alternate Namescustodian
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      130. Consent.source[x]
                      Definition

                      The source on which this consent statement is based. The source might be a scanned original paper form, or a reference to a consent that links back to such a source, a reference to a document repository (e.g. XDS) that stores the original consent document.

                      ShortSource from which this consent is taken
                      Comments

                      The source can be contained inline (Attachment), referenced directly (Consent), referenced in a consent repository (DocumentReference), or simply by an identifier (Identifier), e.g. a CDA document id.

                      Control0..0
                      TypeChoice of: Attachment, Reference(Consent, DocumentReference, Contract, QuestionnaireResponse)
                      Is Modifierfalse
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      132. Consent.policy
                      Definition

                      The references to the policies that are included in this consent scope. Policies may be organizational, but are often defined jurisdictionally, or in law.

                      ShortPolicies covered by this consent
                      Control0..0
                      TypeBackboneElement
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      139. Consent.policyRule
                      Definition

                      A reference to the specific base computable regulation or policy.

                      ShortID of the referenced basis policy set
                      Comments

                      If the policyRule is absent, computable consent would need to be constructed from the elements of the Consent resource.

                      Control1..1
                      This element is affected by the following invariants: ppc-1
                      BindingUnless not suitable, these codes SHALL be taken from ConsentPolicyRuleCodes
                      (extensible to http://hl7.org/fhir/ValueSet/consent-policy)

                      Regulatory policy examples.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Summarytrue
                      Requirements

                      Might be a unique identifier of a policy set in XACML, or other rules engine.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      141. Consent.policyRule.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      143. Consent.policyRule.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      SlicingThis element introduces a set of slices on Consent.policyRule.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                      • value @ url
                      • 145. Consent.policyRule.coding
                        Definition

                        A reference to a code defined by a terminology system.

                        ShortCode defined by a terminology system
                        Comments

                        Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                        Control1..1
                        BindingThe codes SHALL be taken from CH PPQm Referenced Policy Set for Patients (201) and Representative (303) templates
                        (required to http://fhir.ch/ig/ch-epr-fhir/ValueSet/PpqmReferencedPolicySetFullAccess)
                        TypeCoding
                        Is Modifierfalse
                        Summarytrue
                        Requirements

                        Allows for alternative encodings within a code system, and translations to other code systems.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        147. Consent.policyRule.coding.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        149. Consent.policyRule.coding.extension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                        ShortAdditional content defined by implementations
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Alternate Namesextensions, user content
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        SlicingThis element introduces a set of slices on Consent.policyRule.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                        • value @ url
                        • 151. Consent.policyRule.coding.system
                          Definition

                          The identification of the code system that defines the meaning of the symbol in the code.

                          ShortIdentity of the terminology system
                          Comments

                          The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

                          Control1..1
                          Typeuri
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summarytrue
                          Requirements

                          Need to be unambiguous about the source of the definition of the symbol.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          153. Consent.policyRule.coding.version
                          Definition

                          The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

                          ShortVersion of the system - if relevant
                          Comments

                          Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

                          NoteThis is a business version Id, not a resource version Id (see discussion)
                          Control0..0
                          Typestring
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          155. Consent.policyRule.coding.code
                          Definition

                          A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

                          ShortSymbol in syntax defined by the system
                          Control1..1
                          Typecode
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summarytrue
                          Requirements

                          Need to refer to a particular code in the system.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          157. Consent.policyRule.coding.display
                          Definition

                          A representation of the meaning of the code in the system, following the rules of the system.

                          ShortRepresentation defined by the system
                          Control0..1
                          Typestring
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summarytrue
                          Requirements

                          Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          159. Consent.policyRule.coding.userSelected
                          Definition

                          Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

                          ShortIf this coding was chosen directly by the user
                          Comments

                          Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

                          Control0..0
                          Typeboolean
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summarytrue
                          Requirements

                          This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          161. Consent.policyRule.text
                          Definition

                          A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                          ShortPlain text representation of the concept
                          Comments

                          Very often the text is the same as a displayName of one of the codings.

                          Control0..1
                          Typestring
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summarytrue
                          Requirements

                          The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          163. Consent.verification
                          Definition

                          Whether a treatment instruction (e.g. artificial respiration yes or no) was verified with the patient, his/her family or another authorized person.

                          ShortConsent Verified by patient or family
                          Control0..0
                          TypeBackboneElement
                          Is Modifierfalse
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          171. Consent.provision
                          Definition

                          An exception to the base policy of this consent. An exception can be an addition or removal of access permissions.

                          ShortConstraints to the base Consent.policyRule
                          Control1..1
                          TypeBackboneElement
                          Is Modifierfalse
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          173. Consent.provision.id
                          Definition

                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                          ShortUnique id for inter-element referencing
                          Control0..1
                          Typestring
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          175. Consent.provision.extension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                          ShortAdditional content defined by implementations
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifierfalse
                          Summaryfalse
                          Alternate Namesextensions, user content
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          177. Consent.provision.modifierExtension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                          ShortExtensions that cannot be ignored even if unrecognized
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                          Summarytrue
                          Requirements

                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                          Alternate Namesextensions, user content, modifiers
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          179. Consent.provision.type
                          Definition

                          Action to take - permit or deny - when the rule conditions are met. Not permitted in root rule, required in all nested rules.

                          Shortdeny | permit
                          Control0..0
                          BindingThe codes SHALL be taken from ConsentProvisionType
                          (required to http://hl7.org/fhir/ValueSet/consent-provision-type|4.0.1)

                          How a rule statement is applied, such as adding additional consent or removing consent.

                          Typecode
                          Is Modifierfalse
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          181. Consent.provision.period
                          Definition

                          The timeframe in this rule is valid.

                          ShortTimeframe for this rule
                          Control0..0
                          TypePeriod
                          Is Modifierfalse
                          Summarytrue
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          187. Consent.provision.actor
                          Definition

                          Who or what is controlled by this rule. Use group to identify a set of actors by some property they share (e.g. 'admitting officers').

                          ShortWho|what controlled by this rule (or group, by role)
                          Control1..1
                          TypeBackboneElement
                          Is Modifierfalse
                          Summaryfalse
                          Meaning if MissingThere is no specific actor associated with the exception
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          189. Consent.provision.actor.id
                          Definition

                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                          ShortUnique id for inter-element referencing
                          Control0..1
                          Typestring
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          191. Consent.provision.actor.extension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                          ShortAdditional content defined by implementations
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifierfalse
                          Summaryfalse
                          Alternate Namesextensions, user content
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          193. Consent.provision.actor.modifierExtension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                          ShortExtensions that cannot be ignored even if unrecognized
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                          Summarytrue
                          Requirements

                          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                          Alternate Namesextensions, user content, modifiers
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          195. Consent.provision.actor.role
                          Definition

                          How the individual is involved in the resources content that is described in the exception.

                          ShortHow the actor is involved
                          Control1..1
                          BindingThe codes SHALL be taken from EprRole
                          (required to http://fhir.ch/ig/ch-term/ValueSet/EprRole)
                          TypeCodeableConcept
                          Is Modifierfalse
                          Summaryfalse
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          197. Consent.provision.actor.role.id
                          Definition

                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                          ShortUnique id for inter-element referencing
                          Control0..1
                          Typestring
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          199. Consent.provision.actor.role.extension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                          ShortAdditional content defined by implementations
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifierfalse
                          Summaryfalse
                          Alternate Namesextensions, user content
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          SlicingThis element introduces a set of slices on Consent.provision.actor.role.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                          • value @ url
                          • 201. Consent.provision.actor.role.coding
                            Definition

                            A reference to a code defined by a terminology system.

                            ShortCode defined by a terminology system
                            Comments

                            Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                            Control0..*
                            TypeCoding
                            Is Modifierfalse
                            Summarytrue
                            Requirements

                            Allows for alternative encodings within a code system, and translations to other code systems.

                            Pattern Value{
                              "system" : "urn:oid:2.16.756.5.30.1.127.3.10.6",
                              "code" : "PAT"
                            }
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            203. Consent.provision.actor.role.coding.id
                            Definition

                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                            ShortUnique id for inter-element referencing
                            Control0..1
                            Typestring
                            Is Modifierfalse
                            XML FormatIn the XML format, this property is represented as an attribute.
                            Summaryfalse
                            205. Consent.provision.actor.role.coding.extension
                            Definition

                            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                            ShortAdditional content defined by implementations
                            Comments

                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                            Control0..*
                            TypeExtension
                            Is Modifierfalse
                            Summaryfalse
                            Alternate Namesextensions, user content
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            SlicingThis element introduces a set of slices on Consent.provision.actor.role.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                            • value @ url
                            • 207. Consent.provision.actor.role.coding.system
                              Definition

                              The identification of the code system that defines the meaning of the symbol in the code.

                              ShortIdentity of the terminology system
                              Comments

                              The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

                              Control1..1
                              Typeuri
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              Need to be unambiguous about the source of the definition of the symbol.

                              Pattern Valueurn:oid:2.16.756.5.30.1.127.3.10.6
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              209. Consent.provision.actor.role.coding.version
                              Definition

                              The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

                              ShortVersion of the system - if relevant
                              Comments

                              Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

                              NoteThis is a business version Id, not a resource version Id (see discussion)
                              Control0..1
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              211. Consent.provision.actor.role.coding.code
                              Definition

                              A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

                              ShortEPR actor role code
                              Control1..1
                              Typecode
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              Need to refer to a particular code in the system.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              213. Consent.provision.actor.role.coding.display
                              Definition

                              A representation of the meaning of the code in the system, following the rules of the system.

                              ShortRepresentation defined by the system
                              Control0..1
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              215. Consent.provision.actor.role.coding.userSelected
                              Definition

                              Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

                              ShortIf this coding was chosen directly by the user
                              Comments

                              Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

                              Control0..1
                              Typeboolean
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              217. Consent.provision.actor.role.text
                              Definition

                              A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                              ShortPlain text representation of the concept
                              Comments

                              Very often the text is the same as a displayName of one of the codings.

                              Control0..1
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              219. Consent.provision.actor.reference
                              Definition

                              The resource that identifies the actor. To identify actors by type, use group to identify a set of actors by some property they share (e.g. 'admitting officers').

                              ShortResource for the actor (or group, by role)
                              Control1..1
                              TypeReference(Device, Group, CareTeam, Organization, Patient, Practitioner, RelatedPerson, PractitionerRole)
                              Is Modifierfalse
                              Summaryfalse
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              221. Consent.provision.actor.reference.id
                              Definition

                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                              ShortUnique id for inter-element referencing
                              Control0..1
                              Typestring
                              Is Modifierfalse
                              XML FormatIn the XML format, this property is represented as an attribute.
                              Summaryfalse
                              223. Consent.provision.actor.reference.extension
                              Definition

                              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                              ShortAdditional content defined by implementations
                              Comments

                              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                              Control0..*
                              TypeExtension
                              Is Modifierfalse
                              Summaryfalse
                              Alternate Namesextensions, user content
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              SlicingThis element introduces a set of slices on Consent.provision.actor.reference.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                              • value @ url
                              • 225. Consent.provision.actor.reference.reference
                                Definition

                                A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

                                ShortLiteral reference, Relative, internal or absolute URL
                                Comments

                                Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

                                Control0..0
                                This element is affected by the following invariants: ref-1
                                Typestring
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                227. Consent.provision.actor.reference.type
                                Definition

                                The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

                                The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

                                ShortType the reference refers to (e.g. "Patient")
                                Comments

                                This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

                                Control0..0
                                BindingUnless not suitable, these codes SHALL be taken from ResourceType
                                (extensible to http://hl7.org/fhir/ValueSet/resource-types)

                                Aa resource (or, for logical models, the URI of the logical model).

                                Typeuri
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                229. Consent.provision.actor.reference.identifier
                                Definition

                                An identifier - identifies some entity uniquely and unambiguously. Typically this is used for business identifiers.

                                ShortAn identifier intended for computation
                                Comments

                                When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

                                When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

                                Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

                                Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

                                NoteThis is a business identifier, not a resource identifier (see discussion)
                                Control0..1
                                This element is affected by the following invariants: ele-1
                                TypeIdentifier(EPR-SPID Identifier)
                                Is Modifierfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                231. Consent.provision.actor.reference.identifier.id
                                Definition

                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                ShortUnique id for inter-element referencing
                                Control0..1
                                Typestring
                                Is Modifierfalse
                                XML FormatIn the XML format, this property is represented as an attribute.
                                Summaryfalse
                                233. Consent.provision.actor.reference.identifier.extension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                ShortAdditional content defined by implementations
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifierfalse
                                Summaryfalse
                                Alternate Namesextensions, user content
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                SlicingThis element introduces a set of slices on Consent.provision.actor.reference.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                • value @ url
                                • 235. Consent.provision.actor.reference.identifier.use
                                  Definition

                                  The purpose of this identifier.

                                  Shortusual | official | temp | secondary | old (If known)
                                  Comments

                                  Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

                                  Control0..0
                                  BindingThe codes SHALL be taken from IdentifierUse
                                  (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

                                  Identifies the purpose for this identifier, if known .

                                  Typecode
                                  Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
                                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                  Summarytrue
                                  Requirements

                                  Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  237. Consent.provision.actor.reference.identifier.type
                                  Definition

                                  A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

                                  ShortDescription of identifier
                                  Comments

                                  This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

                                  Control1..1
                                  BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
                                  (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

                                  A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

                                  TypeCodeableConcept
                                  Is Modifierfalse
                                  Summarytrue
                                  Requirements

                                  Allows users to make use of identifiers when the identifier system is not known.

                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  239. Consent.provision.actor.reference.identifier.type.id
                                  Definition

                                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                  ShortUnique id for inter-element referencing
                                  Control0..1
                                  Typestring
                                  Is Modifierfalse
                                  XML FormatIn the XML format, this property is represented as an attribute.
                                  Summaryfalse
                                  241. Consent.provision.actor.reference.identifier.type.extension
                                  Definition

                                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                  ShortAdditional content defined by implementations
                                  Comments

                                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                  Control0..*
                                  TypeExtension
                                  Is Modifierfalse
                                  Summaryfalse
                                  Alternate Namesextensions, user content
                                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                  SlicingThis element introduces a set of slices on Consent.provision.actor.reference.identifier.type.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                  • value @ url
                                  • 243. Consent.provision.actor.reference.identifier.type.coding
                                    Definition

                                    A reference to a code defined by a terminology system.

                                    ShortCode defined by a terminology system
                                    Comments

                                    Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                                    Control1..1
                                    BindingThe codes SHALL be taken from CH PPQm Actor Identifier Type
                                    (required to http://fhir.ch/ig/ch-epr-fhir/ValueSet/PpqmActorIdentifierType)
                                    TypeCoding
                                    Is Modifierfalse
                                    Summarytrue
                                    Requirements

                                    Allows for alternative encodings within a code system, and translations to other code systems.

                                    Pattern Value{
                                      "system" : "urn:ietf:rfc:3986",
                                      "code" : "urn:e-health-suisse:2015:epr-spid"
                                    }
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    245. Consent.provision.actor.reference.identifier.type.coding.id
                                    Definition

                                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                    ShortUnique id for inter-element referencing
                                    Control0..1
                                    Typestring
                                    Is Modifierfalse
                                    XML FormatIn the XML format, this property is represented as an attribute.
                                    Summaryfalse
                                    247. Consent.provision.actor.reference.identifier.type.coding.extension
                                    Definition

                                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                    ShortAdditional content defined by implementations
                                    Comments

                                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                    Control0..*
                                    TypeExtension
                                    Is Modifierfalse
                                    Summaryfalse
                                    Alternate Namesextensions, user content
                                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                    SlicingThis element introduces a set of slices on Consent.provision.actor.reference.identifier.type.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                                    • value @ url
                                    • 249. Consent.provision.actor.reference.identifier.type.coding.system
                                      Definition

                                      The identification of the code system that defines the meaning of the symbol in the code.

                                      ShortIdentity of the terminology system
                                      Comments

                                      The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

                                      Control1..1
                                      Typeuri
                                      Is Modifierfalse
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Summarytrue
                                      Requirements

                                      Need to be unambiguous about the source of the definition of the symbol.

                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      251. Consent.provision.actor.reference.identifier.type.coding.version
                                      Definition

                                      The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

                                      ShortVersion of the system - if relevant
                                      Comments

                                      Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

                                      NoteThis is a business version Id, not a resource version Id (see discussion)
                                      Control0..0
                                      Typestring
                                      Is Modifierfalse
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Summarytrue
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      253. Consent.provision.actor.reference.identifier.type.coding.code
                                      Definition

                                      A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

                                      ShortActor identifier type code (name qualifier)
                                      Control1..1
                                      Typecode
                                      Is Modifierfalse
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Summarytrue
                                      Requirements

                                      Need to refer to a particular code in the system.

                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      255. Consent.provision.actor.reference.identifier.type.coding.display
                                      Definition

                                      A representation of the meaning of the code in the system, following the rules of the system.

                                      ShortRepresentation defined by the system
                                      Control0..1
                                      Typestring
                                      Is Modifierfalse
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Summarytrue
                                      Requirements

                                      Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      257. Consent.provision.actor.reference.identifier.type.coding.userSelected
                                      Definition

                                      Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

                                      ShortIf this coding was chosen directly by the user
                                      Comments

                                      Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

                                      Control0..0
                                      Typeboolean
                                      Is Modifierfalse
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Summarytrue
                                      Requirements

                                      This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      259. Consent.provision.actor.reference.identifier.type.text
                                      Definition

                                      A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                                      ShortPlain text representation of the concept
                                      Comments

                                      Very often the text is the same as a displayName of one of the codings.

                                      Control0..0
                                      Typestring
                                      Is Modifierfalse
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Summarytrue
                                      Requirements

                                      The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      261. Consent.provision.actor.reference.identifier.system
                                      Definition

                                      Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

                                      ShortThe namespace for the identifier value
                                      Comments

                                      Identifier.system is always case sensitive.

                                      Control0..1
                                      Typeuri
                                      Is Modifierfalse
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Summarytrue
                                      Requirements

                                      There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

                                      Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      263. Consent.provision.actor.reference.identifier.value
                                      Definition

                                      The portion of the identifier typically relevant to the user and which is unique within the context of the system.

                                      ShortID of an healthcare professional, group of healthcare professionals, patient, or representative
                                      Comments

                                      If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

                                      Control1..1
                                      Typestring
                                      Is Modifierfalse
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Summarytrue
                                      Example<br/><b>General</b>:123456
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      265. Consent.provision.actor.reference.identifier.period
                                      Definition

                                      Time period during which identifier is/was valid for use.

                                      ShortTime period when id is/was valid for use
                                      Control0..0
                                      TypePeriod
                                      Is Modifierfalse
                                      Summarytrue
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      267. Consent.provision.actor.reference.identifier.assigner
                                      Definition

                                      Organization that issued/manages the identifier.

                                      ShortOrganization that issued id (may be just text)
                                      Comments

                                      The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

                                      Control0..0
                                      TypeReference(Organization)
                                      Is Modifierfalse
                                      Summarytrue
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      269. Consent.provision.actor.reference.display
                                      Definition

                                      Plain text narrative that identifies the resource in addition to the resource reference.

                                      ShortThis element is present only in policy sets which reference indefinite sets of actors
                                      Comments

                                      This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

                                      Control0..0
                                      Typestring
                                      Is Modifierfalse
                                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                      Summarytrue
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      271. Consent.provision.action
                                      Definition

                                      Actions controlled by this Rule.

                                      ShortActions controlled by this rule
                                      Comments

                                      Note that this is the direct action (not the grounds for the action covered in the purpose element). At present, the only action in the understood and tested scope of this resource is 'read'.

                                      Control0..0
                                      BindingFor example codes, see ConsentActionCodes
                                      (example to http://hl7.org/fhir/ValueSet/consent-action)

                                      Detailed codes for the consent action.

                                      TypeCodeableConcept
                                      Is Modifierfalse
                                      Summarytrue
                                      Meaning if Missingall actions
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      273. Consent.provision.securityLabel
                                      Definition

                                      A security label, comprised of 0..* security label fields (Privacy tags), which define which resources are controlled by this exception.

                                      ShortSecurity Labels that define affected resources
                                      Comments

                                      If the consent specifies a security label of "R" then it applies to all resources that are labeled "R" or lower. E.g. for Confidentiality, it's a high water mark. For other kinds of security labels, subsumption logic applies. When the purpose of use tag is on the data, access request purpose of use shall not conflict.

                                      Control0..0
                                      BindingUnless not suitable, these codes SHALL be taken from All Security Labels
                                      (extensible to http://hl7.org/fhir/ValueSet/security-labels)

                                      Security Labels from the Healthcare Privacy and Security Classification System.

                                      TypeCoding
                                      Is Modifierfalse
                                      Summarytrue
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      275. Consent.provision.purpose
                                      Definition

                                      The context of the activities a user is taking - why the user is accessing the data - that are controlled by this rule.

                                      ShortContext of activities covered by this rule
                                      Comments

                                      When the purpose of use tag is on the data, access request purpose of use shall not conflict.

                                      Control0..0
                                      BindingThe codes SHALL be taken from EprPurposeOfUse
                                      (required to http://fhir.ch/ig/ch-term/ValueSet/EprPurposeOfUse)
                                      TypeCoding
                                      Is Modifierfalse
                                      Summarytrue
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      284. Consent.provision.class
                                      Definition

                                      The class of information covered by this rule. The type can be a FHIR resource type, a profile on a type, or a CDA document, or some other type that indicates what sort of information the consent relates to.

                                      Shorte.g. Resource Type, Profile, CDA, etc.
                                      Comments

                                      Multiple types are or'ed together. The intention of the contentType element is that the codes refer to profiles or document types defined in a standard or an implementation guide somewhere.

                                      Control0..0
                                      BindingUnless not suitable, these codes SHALL be taken from ConsentContentClass
                                      (extensible to http://hl7.org/fhir/ValueSet/consent-content-class)

                                      The class (type) of information a consent rule covers.

                                      TypeCoding
                                      Is Modifierfalse
                                      Summarytrue
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      286. Consent.provision.code
                                      Definition

                                      If this code is found in an instance, then the rule applies.

                                      Shorte.g. LOINC or SNOMED CT code, etc. in the content
                                      Comments

                                      Typical use of this is a Document code with class = CDA.

                                      Control0..0
                                      BindingFor example codes, see ConsentContentCodes
                                      (example to http://hl7.org/fhir/ValueSet/consent-content-code)

                                      If this code is found in an instance, then the exception applies.

                                      TypeCodeableConcept
                                      Is Modifierfalse
                                      Summarytrue
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      288. Consent.provision.dataPeriod
                                      Definition

                                      Clinical or Operational Relevant period of time that bounds the data controlled by this rule.

                                      ShortTimeframe for data controlled by this rule
                                      Comments

                                      This has a different sense to the Consent.period - that is when the consent agreement holds. This is the time period of the data that is controlled by the agreement.

                                      Control0..0
                                      TypePeriod
                                      Is Modifierfalse
                                      Summarytrue
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      290. Consent.provision.data
                                      Definition

                                      The resources controlled by this rule if specific resources are referenced.

                                      ShortData controlled by this rule
                                      Control0..0
                                      TypeBackboneElement
                                      Is Modifierfalse
                                      Summarytrue
                                      Meaning if Missingall data
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                      297. Consent.provision.provision
                                      Definition

                                      Rules which provide exceptions to the base rule or subrules.

                                      ShortNested Exception Rules
                                      Control0..0
                                      TypeSee ttp://hl7.org/fhir/StructureDefinition/Consent#Consent.provision
                                      Is Modifierfalse
                                      Summaryfalse
                                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))