CH EPR FHIR (R4)
4.0.1-ballot-2 - ballot Switzerland flag

This page is part of the CH EPR FHIR (R4) (v4.0.1-ballot-2: DSTU 4 Ballot 3) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions

Resource Profile: CHmCSDPractitionerRole - Detailed Descriptions

Active as of 2024-11-19

Definitions for the CH.mCSD.PractitionerRole resource profile.

Guidance on how to interpret the contents of this table can be found here

0. PractitionerRole
Invariantsch-mcsd-practitionerrole-ihe-conformance: The Practitioner needs to conform to IHE.mCSD.PractitionerRole (conformsTo('https://profiles.ihe.net/ITI/mCSD/StructureDefinition/IHE.mCSD.PractitionerRole'))
2. PractitionerRole.identifier
NoteThis is a business identifier, not a resource identifier (see discussion)
SlicingThis element introduces a set of slices on PractitionerRole.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • pattern @ $this
  • 4. PractitionerRole.identifier:LDAP
    Slice NameLDAP
    ShortLDAP DN (Distinguished Name), if the relationship is stored in an HPD
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control0..1
    TypeIdentifier(LDAP Identifier)
    Pattern Value{
      "system" : "urn:ietf:rfc:4514"
    }
    6. PractitionerRole.active
    8. PractitionerRole.practitioner
    Control1..?
    TypeReference(CH mCSD Practitioner)
    10. PractitionerRole.organization
    Control1..?
    TypeReference(CH mCSD Organization)
    12. PractitionerRole.code
    Control1..?
    14. PractitionerRole.specialty

    Guidance on how to interpret the contents of this table can be found here

    0. PractitionerRole
    Definition

    A specific set of Roles/Locations/specialties/services that a practitioner may perform at an organization for a period of time.

    ShortCH Core PractitionerRoleRoles/organizations the practitioner is associated with
    Control0..*
    Is Modifierfalse
    Summaryfalse
    Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
    dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
    dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
    dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
    dom-6: A resource should have narrative for robust management (text.`div`.exists())
    ch-mcsd-practitionerrole-ihe-conformance: The Practitioner needs to conform to IHE.mCSD.PractitionerRole (conformsTo('https://profiles.ihe.net/ITI/mCSD/StructureDefinition/IHE.mCSD.PractitionerRole'))
    2. PractitionerRole.implicitRules
    Definition

    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

    ShortA set of rules under which this content was created
    Comments

    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

    Control0..1
    Typeuri
    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    4. PractitionerRole.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Summaryfalse
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    6. PractitionerRole.identifier
    Definition

    Business Identifiers that are specific to a role/location.

    ShortBusiness Identifiers that are specific to a role/location
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control0..*
    TypeIdentifier
    Is Modifierfalse
    Summarytrue
    Requirements

    Often, specific identities are assigned for the agent.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    SlicingThis element introduces a set of slices on PractitionerRole.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • pattern @ $this
    • 8. PractitionerRole.identifier:LDAP
      Slice NameLDAP
      Definition

      An identifier - identifies some entity uniquely and unambiguously. Typically this is used for business identifiers.


      Business Identifiers that are specific to a role/location.

      ShortLDAP DN (Distinguished Name), if the relationship is stored in an HPDBusiness Identifiers that are specific to a role/location
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..1*
      This element is affected by the following invariants: ele-1
      TypeIdentifier(LDAP Identifier)
      Is Modifierfalse
      Requirements

      Often, specific identities are assigned for the agent.

      Pattern Value{
        "system" : "urn:ietf:rfc:4514"
      }
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      10. PractitionerRole.active
      Definition

      Whether this practitioner role record is in active use.

      ShortWhether this practitioner role record is in active use
      Comments

      If this value is false, you may refer to the period to see when the role was in active use. If there is no period specified, no inference can be made about when it was active.

      Control0..1
      Typeboolean
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      Need to be able to mark a practitioner role record as not to be used because it was created in error, or otherwise no longer in active use.

      Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      12. PractitionerRole.practitioner
      Definition

      Practitioner that is able to provide the defined services for the organization.

      ShortPractitioner that is able to provide the defined services for the organization
      Control10..1
      TypeReference(CH mCSD Practitioner, Practitioner)
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      14. PractitionerRole.organization
      Definition

      The organization where the Practitioner performs the roles associated.

      ShortOrganization where the roles are available
      Control10..1
      TypeReference(CH mCSD Organization, Organization)
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      16. PractitionerRole.code
      Definition

      Roles which this practitioner is authorized to perform for the organization.

      ShortRoles which this practitioner may perform
      Comments

      A person may have more than one role.

      Control10..*
      BindingUnless not suitable, these codes SHALL be taken from For example codes, see HCProfessional.hcProfessionhttp://hl7.org/fhir/ValueSet/practitioner-role
      (extensible to http://fhir.ch/ig/ch-term/ValueSet/HCProfessional.hcProfession)
      TypeCodeableConcept
      Is Modifierfalse
      Summarytrue
      Requirements

      Need to know what authority the practitioner has - what can they do?

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      18. PractitionerRole.specialty
      Definition

      Specific specialty of the practitioner.

      ShortSpecific specialty of the practitioner
      Control0..*
      BindingUnless not suitable, these codes SHALL be taken from The codes SHOULD be taken from HCProfessional.hcSpecialisationhttp://hl7.org/fhir/ValueSet/c80-practice-codes
      (extensible to http://fhir.ch/ig/ch-term/ValueSet/HCProfessional.hcSpecialisation)
      TypeCodeableConcept
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

      Guidance on how to interpret the contents of this table can be found here

      0. PractitionerRole
      Definition

      A specific set of Roles/Locations/specialties/services that a practitioner may perform at an organization for a period of time.

      ShortCH Core PractitionerRole
      Control0..*
      Is Modifierfalse
      Summaryfalse
      Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
      dom-6: A resource should have narrative for robust management (text.`div`.exists())
      ch-mcsd-practitionerrole-ihe-conformance: The Practitioner needs to conform to IHE.mCSD.PractitionerRole (conformsTo('https://profiles.ihe.net/ITI/mCSD/StructureDefinition/IHE.mCSD.PractitionerRole'))
      2. PractitionerRole.id
      Definition

      The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

      ShortLogical id of this artifact
      Comments

      The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

      Control0..1
      Typeid
      Is Modifierfalse
      Summarytrue
      4. PractitionerRole.meta
      Definition

      The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

      ShortMetadata about the resource
      Control0..1
      TypeMeta
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      6. PractitionerRole.implicitRules
      Definition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

      ShortA set of rules under which this content was created
      Comments

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

      Control0..1
      Typeuri
      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      8. PractitionerRole.language
      Definition

      The base language in which the resource is written.

      ShortLanguage of the resource content
      Comments

      Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

      Control0..1
      BindingThe codes SHOULD be taken from CommonLanguages
      (preferred to http://hl7.org/fhir/ValueSet/languages)

      A human language.

      Additional BindingsPurpose
      AllLanguagesMax Binding
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      10. PractitionerRole.text
      Definition

      A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

      ShortText summary of the resource, for human interpretation
      Comments

      Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

      Control0..1
      TypeNarrative
      Is Modifierfalse
      Summaryfalse
      Alternate Namesnarrative, html, xhtml, display
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      12. PractitionerRole.contained
      Definition

      These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

      ShortContained, inline Resources
      Comments

      This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

      Control0..*
      TypeResource
      Is Modifierfalse
      Summaryfalse
      Alternate Namesinline resources, anonymous resources, contained resources
      14. PractitionerRole.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      16. PractitionerRole.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
      Summaryfalse
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      18. PractitionerRole.identifier
      Definition

      Business Identifiers that are specific to a role/location.

      ShortBusiness Identifiers that are specific to a role/location
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..*
      TypeIdentifier
      Is Modifierfalse
      Summarytrue
      Requirements

      Often, specific identities are assigned for the agent.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on PractitionerRole.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • pattern @ $this
      • 20. PractitionerRole.identifier:LDAP
        Slice NameLDAP
        Definition

        An identifier - identifies some entity uniquely and unambiguously. Typically this is used for business identifiers.

        ShortLDAP DN (Distinguished Name), if the relationship is stored in an HPD
        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..1
        This element is affected by the following invariants: ele-1
        TypeIdentifier(LDAP Identifier)
        Is Modifierfalse
        Requirements

        Often, specific identities are assigned for the agent.

        Pattern Value{
          "system" : "urn:ietf:rfc:4514"
        }
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        22. PractitionerRole.active
        Definition

        Whether this practitioner role record is in active use.

        ShortWhether this practitioner role record is in active use
        Comments

        If this value is false, you may refer to the period to see when the role was in active use. If there is no period specified, no inference can be made about when it was active.

        Control0..1
        Typeboolean
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Need to be able to mark a practitioner role record as not to be used because it was created in error, or otherwise no longer in active use.

        Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        24. PractitionerRole.period
        Definition

        The period during which the person is authorized to act as a practitioner in these role(s) for the organization.

        ShortThe period during which the practitioner is authorized to perform in these role(s)
        Control0..1
        TypePeriod
        Is Modifierfalse
        Summarytrue
        Requirements

        Even after the agencies is revoked, the fact that it existed must still be recorded.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        26. PractitionerRole.practitioner
        Definition

        Practitioner that is able to provide the defined services for the organization.

        ShortPractitioner that is able to provide the defined services for the organization
        Control1..1
        TypeReference(CH mCSD Practitioner)
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        28. PractitionerRole.organization
        Definition

        The organization where the Practitioner performs the roles associated.

        ShortOrganization where the roles are available
        Control1..1
        TypeReference(CH mCSD Organization)
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        30. PractitionerRole.code
        Definition

        Roles which this practitioner is authorized to perform for the organization.

        ShortRoles which this practitioner may perform
        Comments

        A person may have more than one role.

        Control1..*
        BindingUnless not suitable, these codes SHALL be taken from HCProfessional.hcProfession
        (extensible to http://fhir.ch/ig/ch-term/ValueSet/HCProfessional.hcProfession)
        TypeCodeableConcept
        Is Modifierfalse
        Summarytrue
        Requirements

        Need to know what authority the practitioner has - what can they do?

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        32. PractitionerRole.specialty
        Definition

        Specific specialty of the practitioner.

        ShortSpecific specialty of the practitioner
        Control0..*
        BindingUnless not suitable, these codes SHALL be taken from HCProfessional.hcSpecialisation
        (extensible to http://fhir.ch/ig/ch-term/ValueSet/HCProfessional.hcSpecialisation)
        TypeCodeableConcept
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        34. PractitionerRole.location
        Definition

        The location(s) at which this practitioner provides care.

        ShortThe location(s) at which this practitioner provides care
        Control0..*
        TypeReference(CH Core Location)
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        36. PractitionerRole.healthcareService
        Definition

        The list of healthcare services that this worker provides for this role's Organization/Location(s).

        ShortThe list of healthcare services that this worker provides for this role's Organization/Location(s)
        Control0..*
        TypeReference(HealthcareService)
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        38. PractitionerRole.telecom
        Definition

        Contact details that are specific to the role/location/service.

        ShortContact details that are specific to the role/location/service
        Control0..*
        TypeContactPoint
        Is Modifierfalse
        Summarytrue
        Requirements

        Often practitioners have a dedicated line for each location (or service) that they work at, and need to be able to define separate contact details for each of these.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        40. PractitionerRole.availableTime
        Definition

        A collection of times the practitioner is available or performing this role at the location and/or healthcareservice.

        ShortTimes the Service Site is available
        Comments

        More detailed availability information may be provided in associated Schedule/Slot resources.

        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        42. PractitionerRole.availableTime.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        44. PractitionerRole.availableTime.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        46. PractitionerRole.availableTime.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        48. PractitionerRole.availableTime.daysOfWeek
        Definition

        Indicates which days of the week are available between the start and end Times.

        Shortmon | tue | wed | thu | fri | sat | sun
        Control0..*
        BindingThe codes SHALL be taken from DaysOfWeek
        (required to http://hl7.org/fhir/ValueSet/days-of-week|4.0.1)

        The days of the week.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        50. PractitionerRole.availableTime.allDay
        Definition

        Is this always available? (hence times are irrelevant) e.g. 24 hour service.

        ShortAlways available? e.g. 24 hour service
        Control0..1
        Typeboolean
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        52. PractitionerRole.availableTime.availableStartTime
        Definition

        The opening time of day. Note: If the AllDay flag is set, then this time is ignored.

        ShortOpening time of day (ignored if allDay = true)
        Comments

        The timezone is expected to be for where this HealthcareService is provided at.

        Control0..1
        Typetime
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        54. PractitionerRole.availableTime.availableEndTime
        Definition

        The closing time of day. Note: If the AllDay flag is set, then this time is ignored.

        ShortClosing time of day (ignored if allDay = true)
        Comments

        The timezone is expected to be for where this HealthcareService is provided at.

        Control0..1
        Typetime
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        56. PractitionerRole.notAvailable
        Definition

        The practitioner is not available or performing this role during this period of time due to the provided reason.

        ShortNot available during this time due to provided reason
        Control0..*
        TypeBackboneElement
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        58. PractitionerRole.notAvailable.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        60. PractitionerRole.notAvailable.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        62. PractitionerRole.notAvailable.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        64. PractitionerRole.notAvailable.description
        Definition

        The reason that can be presented to the user as to why this time is not available.

        ShortReason presented to the user explaining why time not available
        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        66. PractitionerRole.notAvailable.during
        Definition

        Service is not available (seasonally or for a public holiday) from this date.

        ShortService not available from this date
        Control0..1
        TypePeriod
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        68. PractitionerRole.availabilityExceptions
        Definition

        A description of site availability exceptions, e.g. public holiday availability. Succinctly describing all possible exceptions to normal site availability as details in the available Times and not available Times.

        ShortDescription of availability exceptions
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        70. PractitionerRole.endpoint
        Definition

        Technical endpoints providing access to services operated for the practitioner with this role.

        ShortTechnical endpoints providing access to services operated for the practitioner with this role
        Control0..*
        TypeReference(Endpoint)
        Is Modifierfalse
        Summaryfalse
        Requirements

        Organizations have multiple systems that provide various services and ,ay also be different for practitioners too.

        So the endpoint satisfies the need to be able to define the technical connection details for how to connect to them, and for what purpose.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))