CH EMED (R4)
5.0.0-ballot - ballot Switzerland flag

This page is part of the CH EMED (R4) (v5.0.0-ballot: STU 5 Ballot 1) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions

Resource Profile: CHEMEDObservationList - Detailed Descriptions

Active as of 2024-05-16

Definitions for the ch-emed-observation-list resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Observation
ShortCH EMED Observation (LIST)
2. Observation.extension:parentDocument
Slice NameparentDocument
ShortReference to the parent document
Control0..1
TypeExtension(CH EMED Extension Pharmaceutical Advice) (Complex Extension)
4. Observation.extension:authorDocument
Slice NameauthorDocument
ShortAuthor of the original document if different from the author of the medical decision (Observation.performer), see also 'Guidance - Authorship'
Control0..1
TypeExtension(Author of the content) (Extension Type: Reference)

Guidance on how to interpret the contents of this table can be found here

0. Observation
Definition

Measurements and simple assertions made about a patient, device or other subject.

ShortCH EMED Observation (LIST)Measurements and simple assertions
Comments

Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

Control0..*
Is Modifierfalse
Summaryfalse
Alternate NamesVital Signs, Measurement, Results, Tests
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present (dataAbsentReason.empty() or value.empty())
obs-7: If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present (value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty())
ch-obs-1: In case of a 'CHANGE', reference shall be made to an entry containing the changes. (code.coding.exists(system='urn:oid:1.3.6.1.4.1.19376.1.9.2.1' and code='CHANGE') implies extension.where(url='http://fhir.ch/ig/ch-emed/StructureDefinition/ch-emed-ext-medicationstatement-changed' or url='http://fhir.ch/ig/ch-emed/StructureDefinition/ch-emed-ext-medicationrequest-changed').exists())
obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present (dataAbsentReason.empty() or value.empty())
obs-7: If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present (value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty())
2. Observation.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Observation.extension:treatmentPlan
Slice NametreatmentPlan
Definition

An Extension

ShortReference to the medication treatment plan
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(CH EMED Extension Treatment Plan) (Complex Extension)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. Observation.extension:prescription
Slice Nameprescription
Definition

An Extension

ShortReference to the medication prescription
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(CH EMED Extension Prescription) (Complex Extension)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
8. Observation.extension:dispense
Slice Namedispense
Definition

An Extension

ShortReference to the medication dispense
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(CH EMED Extension Dispense) (Complex Extension)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
10. Observation.extension:medicationStatementChanged
Slice NamemedicationStatementChanged
Definition

An Extension

ShortReference to the changed medication statement (it shall have the same identifier as the entry it replaces)
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(CH EMED Extension MedicationStatement Changed) (Extension Type: Reference(CH EMED MedicationStatement Changed)referenced, bundled)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
12. Observation.extension:medicationRequestChanged
Slice NamemedicationRequestChanged
Definition

An Extension

ShortReference to the changed medication request (it shall have the same identifier as the entry it replaces)
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(CH EMED Extension MedicationRequest Changed) (Extension Type: Reference(CH EMED MedicationRequest Changed)referenced, bundled)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
14. Observation.extension:parentDocument
Slice NameparentDocument
Definition

An Extension

ShortReference to the parent document
Control0..1
TypeExtension(CH EMED Extension Pharmaceutical Advice) (Complex Extension)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
16. Observation.extension:authorDocument
Slice NameauthorDocument
Definition

Optional Extension Element - found in all resources.

ShortAuthor of the original document if different from the author of the medical decision (Observation.performer), see also 'Guidance - Authorship'
Control0..1
TypeExtension(Author of the content) (Extension Type: Reference)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. Observation.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
20. Observation.identifier
Definition

A unique identifier assigned to this observation.

ShortObservation IdentifierBusiness Identifier for observation
NoteThis is a business identifier, not a resource identifier (see discussion)
Control10..1*
TypeIdentifier
Is Modifierfalse
Summarytrue
Requirements

Allows observations to be distinguished and referenced.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. Observation.identifier.use
Definition

The purpose of this identifier.

Shortusual | official | temp | secondary | old (If known)
Comments

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Control0..1
BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
(required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

Identifies the purpose for this identifier, if known .

Typecode
Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. Observation.identifier.system
Definition

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

ShortThe namespace for the identifier value
Comments

Identifier.system is always case sensitive.

Control10..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Fixed Valueurn:ietf:rfc:3986
Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Observation.identifier.value
Definition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

ShortIdentifier value as UUIDThe value that is unique
Comments

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Control10..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Example<br/><b>General</b>:123456 <br/><b>CH EMED</b>:urn:uuid:daa8cd41-34a1-4a9c-9a6d-cd3f850142e9
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. Observation.status
Definition

The status of the result value.

Shortregistered | preliminary | final | amended +
Comments

This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

Control1..1
BindingThe codes SHALL be taken from ObservationStatushttp://hl7.org/fhir/ValueSet/observation-status|4.0.1
(required to http://hl7.org/fhir/ValueSet/observation-status|4.0.1)

Codes providing the status of an observation.

Typecode
Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to track the status of individual results. Some results are finalized before the whole report is finalized.

Fixed Valuefinal
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. Observation.code
Definition

Describes what was observed. Sometimes this is called the observation "name".

ShortObservation codeType of observation (code / type)
Comments

All code-value and, if present, component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

Control1..1
BindingThe codes SHALL be taken from For example codes, see IHE Pharmaceutical Advice Status Listhttp://hl7.org/fhir/ValueSet/observation-codes
(required to http://fhir.ch/ig/ch-term/ValueSet/ihe-pharmaceuticaladvicestatuslist)
TypeCodeableConcept
Is Modifierfalse
Summarytrue
Requirements

Knowing what kind of observation is being made is essential to understanding the observation.

Alternate NamesName
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. Observation.effective[x]
Definition

The time or time-period the observed value is asserted as being true. For biological subjects - e.g. human patients - this is usually called the "physiologically relevant time". This is usually either the time of the procedure or of specimen collection, but very often the source of the date/time is not known, only the date/time itself.

ShortClinically relevant time/time-period for observation
Comments

At least a date should be present unless this observation is a historical report. For recording imprecise or "fuzzy" times (For example, a blood glucose measurement taken "after breakfast") use the Timing datatype which allow the measurement to be tied to regular life events.

Control0..1
TypeChoice of: dateTime, Period, Timing, instant
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Knowing when an observation was deemed true is important to its relevance as well as determining trends.

Alternate NamesOccurrence
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Observation.effective[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • type @ $this
  • 34. Observation.effective[x]:effectiveDateTime
    Slice NameeffectiveDateTime
    Definition

    The time or time-period the observed value is asserted as being true. For biological subjects - e.g. human patients - this is usually called the "physiologically relevant time". This is usually either the time of the procedure or of specimen collection, but very often the source of the date/time is not known, only the date/time itself.

    ShortEffective TimeClinically relevant time/time-period for observation
    Comments

    At least a date should be present unless this observation is a historical report. For recording imprecise or "fuzzy" times (For example, a blood glucose measurement taken "after breakfast") use the Timing datatype which allow the measurement to be tied to regular life events.

    Control0..1
    TypedateTime, Period, Timing, instant
    [x] NoteSee Choice of Data Types for further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    Knowing when an observation was deemed true is important to its relevance as well as determining trends.

    Alternate NamesOccurrence
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    36. Observation.issued
    Definition

    The date and time this version of the observation was made available to providers, typically after the results have been reviewed and verified.

    ShortDate/Time this version was made available
    Comments

    For Observations that don’t require review and verification, it may be the same as the lastUpdated time of the resource itself. For Observations that do require review and verification for certain updates, it might not be the same as the lastUpdated time of the resource itself due to a non-clinically significant update that doesn’t require the new version to be reviewed and verified again.

    Control10..1
    Typeinstant
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    38. Observation.performer
    Definition

    Who was responsible for asserting the observed value as "true".

    ShortThe author of the medical decision, see also 'Guidance - Authorship'Who is responsible for the observation
    Control10..1*
    TypeReference(CH EMED PractitionerRole, CH Core Patient EPR, RelatedPerson, Practitioner, PractitionerRole, Organization, CareTeam, Patient)
    Is Modifierfalse
    Summarytrue
    Requirements

    May give a degree of confidence in the observation and also indicates where follow-up questions should be directed.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    40. Observation.performer.reference
    Definition

    A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

    ShortLiteral reference, Relative, internal or absolute URL
    Comments

    Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

    Control10..1
    This element is affected by the following invariants: ref-1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    42. Observation.note
    Definition

    Comments about the observation or the results.

    ShortCOMMENT: the actual comment. OK/CHANGE/REFUSE/CANCEL/SUSPEND: the reason why the action was done.Comments about the observation
    Comments

    May include general statements about the observation, or statements about significant, unexpected or unreliable results values, or information about its source when relevant to its interpretation.

    Control10..1*
    TypeAnnotation
    Is Modifierfalse
    Summaryfalse
    Requirements

    Need to be able to provide free text additional information.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

    Guidance on how to interpret the contents of this table can be found here

    0. Observation
    Definition

    Measurements and simple assertions made about a patient, device or other subject.

    ShortCH EMED Observation (LIST)
    Comments

    Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.

    Control0..*
    Is Modifierfalse
    Summaryfalse
    Alternate NamesVital Signs, Measurement, Results, Tests
    Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
    dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
    dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
    dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
    dom-6: A resource should have narrative for robust management (text.`div`.exists())
    obs-6: dataAbsentReason SHALL only be present if Observation.value[x] is not present (dataAbsentReason.empty() or value.empty())
    obs-7: If Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present (value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty())
    ch-obs-1: In case of a 'CHANGE', reference shall be made to an entry containing the changes. (code.coding.exists(system='urn:oid:1.3.6.1.4.1.19376.1.9.2.1' and code='CHANGE') implies extension.where(url='http://fhir.ch/ig/ch-emed/StructureDefinition/ch-emed-ext-medicationstatement-changed' or url='http://fhir.ch/ig/ch-emed/StructureDefinition/ch-emed-ext-medicationrequest-changed').exists())
    2. Observation.id
    Definition

    The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

    ShortLogical id of this artifact
    Comments

    The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

    Control0..1
    Typeid
    Is Modifierfalse
    Summarytrue
    4. Observation.meta
    Definition

    The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

    ShortMetadata about the resource
    Control0..1
    TypeMeta
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    6. Observation.implicitRules
    Definition

    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

    ShortA set of rules under which this content was created
    Comments

    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

    Control0..1
    Typeuri
    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    8. Observation.language
    Definition

    The base language in which the resource is written.

    ShortLanguage of the resource content
    Comments

    Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

    Control0..1
    BindingThe codes SHOULD be taken from CommonLanguages
    (preferred to http://hl7.org/fhir/ValueSet/languages)

    A human language.

    Additional BindingsPurpose
    AllLanguagesMax Binding
    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    10. Observation.text
    Definition

    A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

    ShortText summary of the resource, for human interpretation
    Comments

    Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

    Control0..1
    TypeNarrative
    Is Modifierfalse
    Summaryfalse
    Alternate Namesnarrative, html, xhtml, display
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    12. Observation.contained
    Definition

    These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

    ShortContained, inline Resources
    Comments

    This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

    Control0..*
    TypeResource
    Is Modifierfalse
    Summaryfalse
    Alternate Namesinline resources, anonymous resources, contained resources
    14. Observation.extension
    Definition

    An Extension

    ShortExtension
    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on Observation.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 16. Observation.extension:treatmentPlan
      Slice NametreatmentPlan
      Definition

      An Extension

      ShortReference to the medication treatment plan
      Control0..1
      This element is affected by the following invariants: ele-1
      TypeExtension(CH EMED Extension Treatment Plan) (Complex Extension)
      Is Modifierfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      18. Observation.extension:prescription
      Slice Nameprescription
      Definition

      An Extension

      ShortReference to the medication prescription
      Control0..1
      This element is affected by the following invariants: ele-1
      TypeExtension(CH EMED Extension Prescription) (Complex Extension)
      Is Modifierfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      20. Observation.extension:dispense
      Slice Namedispense
      Definition

      An Extension

      ShortReference to the medication dispense
      Control0..1
      This element is affected by the following invariants: ele-1
      TypeExtension(CH EMED Extension Dispense) (Complex Extension)
      Is Modifierfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      22. Observation.extension:medicationStatementChanged
      Slice NamemedicationStatementChanged
      Definition

      An Extension

      ShortReference to the changed medication statement (it shall have the same identifier as the entry it replaces)
      Control0..1
      This element is affected by the following invariants: ele-1
      TypeExtension(CH EMED Extension MedicationStatement Changed) (Extension Type: Reference(CH EMED MedicationStatement Changed)referenced, bundled)
      Is Modifierfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      24. Observation.extension:medicationRequestChanged
      Slice NamemedicationRequestChanged
      Definition

      An Extension

      ShortReference to the changed medication request (it shall have the same identifier as the entry it replaces)
      Control0..1
      This element is affected by the following invariants: ele-1
      TypeExtension(CH EMED Extension MedicationRequest Changed) (Extension Type: Reference(CH EMED MedicationRequest Changed)referenced, bundled)
      Is Modifierfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      26. Observation.extension:parentDocument
      Slice NameparentDocument
      Definition

      An Extension

      ShortReference to the parent document
      Control0..1
      TypeExtension(CH EMED Extension Pharmaceutical Advice) (Complex Extension)
      Is Modifierfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      28. Observation.extension:authorDocument
      Slice NameauthorDocument
      Definition

      Optional Extension Element - found in all resources.

      ShortAuthor of the original document if different from the author of the medical decision (Observation.performer), see also 'Guidance - Authorship'
      Control0..1
      TypeExtension(Author of the content) (Extension Type: Reference)
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      30. Observation.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
      Summaryfalse
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      32. Observation.identifier
      Definition

      A unique identifier assigned to this observation.

      ShortObservation Identifier
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control1..1
      TypeIdentifier
      Is Modifierfalse
      Summarytrue
      Requirements

      Allows observations to be distinguished and referenced.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      34. Observation.identifier.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      36. Observation.identifier.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on Observation.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 38. Observation.identifier.use
        Definition

        The purpose of this identifier.

        Shortusual | official | temp | secondary | old (If known)
        Comments

        Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

        Control0..1
        BindingThe codes SHALL be taken from IdentifierUse
        (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

        Identifies the purpose for this identifier, if known .

        Typecode
        Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        40. Observation.identifier.type
        Definition

        A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

        ShortDescription of identifier
        Comments

        This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

        Control0..1
        BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
        (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

        A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

        TypeCodeableConcept
        Is Modifierfalse
        Summarytrue
        Requirements

        Allows users to make use of identifiers when the identifier system is not known.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        42. Observation.identifier.system
        Definition

        Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

        ShortThe namespace for the identifier value
        Comments

        Identifier.system is always case sensitive.

        Control1..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

        Fixed Valueurn:ietf:rfc:3986
        Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        44. Observation.identifier.value
        Definition

        The portion of the identifier typically relevant to the user and which is unique within the context of the system.

        ShortIdentifier value as UUID
        Comments

        If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Example<br/><b>General</b>:123456 <br/><b>CH EMED</b>:urn:uuid:daa8cd41-34a1-4a9c-9a6d-cd3f850142e9
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        46. Observation.identifier.period
        Definition

        Time period during which identifier is/was valid for use.

        ShortTime period when id is/was valid for use
        Control0..1
        TypePeriod
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        48. Observation.identifier.assigner
        Definition

        Organization that issued/manages the identifier.

        ShortOrganization that issued id (may be just text)
        Comments

        The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

        Control0..1
        TypeReference(Organization)
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        50. Observation.basedOn
        Definition

        A plan, proposal or order that is fulfilled in whole or in part by this event. For example, a MedicationRequest may require a patient to have laboratory test performed before it is dispensed.

        ShortFulfills plan, proposal or order
        Control0..*
        TypeReference(CarePlan, DeviceRequest, ImmunizationRecommendation, MedicationRequest, NutritionOrder, ServiceRequest)
        Is Modifierfalse
        Summarytrue
        Requirements

        Allows tracing of authorization for the event and tracking whether proposals/recommendations were acted upon.

        Alternate NamesFulfills
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        52. Observation.partOf
        Definition

        A larger event of which this particular Observation is a component or step. For example, an observation as part of a procedure.

        ShortPart of referenced event
        Comments

        To link an Observation to an Encounter use encounter. See the Notes below for guidance on referencing another Observation.

        Control0..*
        TypeReference(MedicationAdministration, MedicationDispense, MedicationStatement, Procedure, Immunization, ImagingStudy)
        Is Modifierfalse
        Summarytrue
        Alternate NamesContainer
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        54. Observation.status
        Definition

        The status of the result value.

        Shortregistered | preliminary | final | amended +
        Comments

        This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

        Control1..1
        BindingThe codes SHALL be taken from ObservationStatus
        (required to http://hl7.org/fhir/ValueSet/observation-status|4.0.1)

        Codes providing the status of an observation.

        Typecode
        Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Need to track the status of individual results. Some results are finalized before the whole report is finalized.

        Fixed Valuefinal
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        56. Observation.category
        Definition

        A code that classifies the general type of observation being made.

        ShortClassification of type of observation
        Comments

        In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.

        Control0..*
        BindingThe codes SHOULD be taken from ObservationCategoryCodes
        (preferred to http://hl7.org/fhir/ValueSet/observation-category)

        Codes for high level observation categories.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Requirements

        Used for filtering what observations are retrieved and displayed.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        58. Observation.code
        Definition

        Describes what was observed. Sometimes this is called the observation "name".

        ShortObservation code
        Comments

        All code-value and, if present, component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

        Control1..1
        BindingThe codes SHALL be taken from IHE Pharmaceutical Advice Status List
        (required to http://fhir.ch/ig/ch-term/ValueSet/ihe-pharmaceuticaladvicestatuslist)
        TypeCodeableConcept
        Is Modifierfalse
        Summarytrue
        Requirements

        Knowing what kind of observation is being made is essential to understanding the observation.

        Alternate NamesName
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        60. Observation.subject
        Definition

        The patient, or group of patients, location, or device this observation is about and into whose record the observation is placed. If the actual focus of the observation is different from the subject (or a sample of, part, or region of the subject), the focus element or the code itself specifies the actual focus of the observation.

        ShortPatient
        Comments

        One would expect this element to be a cardinality of 1..1. The only circumstance in which the subject can be missing is when the observation is made by a device that does not know the patient. In this case, the observation SHALL be matched to a patient through some context/channel matching technique, and at this point, the observation should be updated.

        Control0..1
        TypeReference(CH Core Patient)
        Is Modifierfalse
        Summarytrue
        Requirements

        Observations have no value if you don't know who or what they're about.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        62. Observation.subject.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        64. Observation.subject.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on Observation.subject.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 66. Observation.subject.reference
          Definition

          A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

          ShortLiteral reference, Relative, internal or absolute URL
          Comments

          Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

          Control1..1
          This element is affected by the following invariants: ref-1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          68. Observation.subject.type
          Definition

          The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

          The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

          ShortType the reference refers to (e.g. "Patient")
          Comments

          This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

          Control0..1
          BindingUnless not suitable, these codes SHALL be taken from ResourceType
          (extensible to http://hl7.org/fhir/ValueSet/resource-types)

          Aa resource (or, for logical models, the URI of the logical model).

          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          70. Observation.subject.identifier
          Definition

          An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

          ShortLogical reference, when literal reference is not known
          Comments

          When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

          When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

          Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

          Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

          NoteThis is a business identifier, not a resource identifier (see discussion)
          Control0..1
          TypeIdentifier
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          72. Observation.subject.display
          Definition

          Plain text narrative that identifies the resource in addition to the resource reference.

          ShortText alternative for the resource
          Comments

          This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          74. Observation.focus
          Definition

          The actual focus of an observation when it is not the patient of record representing something or someone associated with the patient such as a spouse, parent, fetus, or donor. For example, fetus observations in a mother's record. The focus of an observation could also be an existing condition, an intervention, the subject's diet, another observation of the subject, or a body structure such as tumor or implanted device. An example use case would be using the Observation resource to capture whether the mother is trained to change her child's tracheostomy tube. In this example, the child is the patient of record and the mother is the focus.

          ShortWhat the observation is about, when it is not about the subject of record
          Comments

          Typically, an observation is made about the subject - a patient, or group of patients, location, or device - and the distinction between the subject and what is directly measured for an observation is specified in the observation code itself ( e.g., "Blood Glucose") and does not need to be represented separately using this element. Use specimen if a reference to a specimen is required. If a code is required instead of a resource use either bodysite for bodysites or the standard extension focusCode.

          Control0..*
          TypeReference(Resource)
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          76. Observation.encounter
          Definition

          The healthcare event (e.g. a patient and healthcare provider interaction) during which this observation is made.

          ShortHealthcare event during which this observation is made
          Comments

          This will typically be the encounter the event occurred within, but some events may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter (e.g. pre-admission laboratory tests).

          Control0..1
          TypeReference(Encounter)
          Is Modifierfalse
          Summarytrue
          Requirements

          For some observations it may be important to know the link between an observation and a particular encounter.

          Alternate NamesContext
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          78. Observation.effective[x]
          Definition

          The time or time-period the observed value is asserted as being true. For biological subjects - e.g. human patients - this is usually called the "physiologically relevant time". This is usually either the time of the procedure or of specimen collection, but very often the source of the date/time is not known, only the date/time itself.

          ShortClinically relevant time/time-period for observation
          Comments

          At least a date should be present unless this observation is a historical report. For recording imprecise or "fuzzy" times (For example, a blood glucose measurement taken "after breakfast") use the Timing datatype which allow the measurement to be tied to regular life events.

          Control0..1
          TypeChoice of: dateTime, Period, Timing, instant
          [x] NoteSee Choice of Data Types for further information about how to use [x]
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          Knowing when an observation was deemed true is important to its relevance as well as determining trends.

          Alternate NamesOccurrence
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          SlicingThis element introduces a set of slices on Observation.effective[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • type @ $this
          • 80. Observation.effective[x]:effectiveDateTime
            Slice NameeffectiveDateTime
            Definition

            The time or time-period the observed value is asserted as being true. For biological subjects - e.g. human patients - this is usually called the "physiologically relevant time". This is usually either the time of the procedure or of specimen collection, but very often the source of the date/time is not known, only the date/time itself.

            ShortEffective Time
            Comments

            At least a date should be present unless this observation is a historical report. For recording imprecise or "fuzzy" times (For example, a blood glucose measurement taken "after breakfast") use the Timing datatype which allow the measurement to be tied to regular life events.

            Control0..1
            TypedateTime
            [x] NoteSee Choice of Data Types for further information about how to use [x]
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            Knowing when an observation was deemed true is important to its relevance as well as determining trends.

            Alternate NamesOccurrence
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            82. Observation.issued
            Definition

            The date and time this version of the observation was made available to providers, typically after the results have been reviewed and verified.

            ShortDate/Time this version was made available
            Comments

            For Observations that don’t require review and verification, it may be the same as the lastUpdated time of the resource itself. For Observations that do require review and verification for certain updates, it might not be the same as the lastUpdated time of the resource itself due to a non-clinically significant update that doesn’t require the new version to be reviewed and verified again.

            Control1..1
            Typeinstant
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            84. Observation.performer
            Definition

            Who was responsible for asserting the observed value as "true".

            ShortThe author of the medical decision, see also 'Guidance - Authorship'
            Control1..1
            TypeReference(CH EMED PractitionerRole, CH Core Patient EPR, RelatedPerson)
            Is Modifierfalse
            Summarytrue
            Requirements

            May give a degree of confidence in the observation and also indicates where follow-up questions should be directed.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            86. Observation.performer.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            88. Observation.performer.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on Observation.performer.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 90. Observation.performer.reference
              Definition

              A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

              ShortLiteral reference, Relative, internal or absolute URL
              Comments

              Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

              Control1..1
              This element is affected by the following invariants: ref-1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              92. Observation.performer.type
              Definition

              The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

              The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

              ShortType the reference refers to (e.g. "Patient")
              Comments

              This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

              Control0..1
              BindingUnless not suitable, these codes SHALL be taken from ResourceType
              (extensible to http://hl7.org/fhir/ValueSet/resource-types)

              Aa resource (or, for logical models, the URI of the logical model).

              Typeuri
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              94. Observation.performer.identifier
              Definition

              An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

              ShortLogical reference, when literal reference is not known
              Comments

              When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

              When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

              Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

              Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

              NoteThis is a business identifier, not a resource identifier (see discussion)
              Control0..1
              TypeIdentifier
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              96. Observation.performer.display
              Definition

              Plain text narrative that identifies the resource in addition to the resource reference.

              ShortText alternative for the resource
              Comments

              This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

              Control0..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              98. Observation.value[x]
              Definition

              The information determined as a result of making the observation, if the information has a simple value.

              ShortActual result
              Comments

              An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

              Control0..1
              This element is affected by the following invariants: obs-7
              TypeChoice of: Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period
              [x] NoteSee Choice of Data Types for further information about how to use [x]
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Requirements

              An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              100. Observation.dataAbsentReason
              Definition

              Provides a reason why the expected value in the element Observation.value[x] is missing.

              ShortWhy the result is missing
              Comments

              Null or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. For example, measurement values for a serology test could be "detected", "not detected", "inconclusive", or "specimen unsatisfactory".

              The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For example, the dataAbsentReason code "error" could be used when the measurement was not completed. Note that an observation may only be reported if there are values to report. For example differential cell counts values may be reported only when > 0. Because of these options, use-case agreements are required to interpret general observations for null or exceptional values.

              Control0..1
              This element is affected by the following invariants: obs-6
              BindingUnless not suitable, these codes SHALL be taken from DataAbsentReason
              (extensible to http://hl7.org/fhir/ValueSet/data-absent-reason)

              Codes specifying why the result (Observation.value[x]) is missing.

              TypeCodeableConcept
              Is Modifierfalse
              Summaryfalse
              Requirements

              For many results it is necessary to handle exceptional values in measurements.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              102. Observation.interpretation
              Definition

              A categorical assessment of an observation value. For example, high, low, normal.

              ShortHigh, low, normal, etc.
              Comments

              Historically used for laboratory results (known as 'abnormal flag' ), its use extends to other use cases where coded interpretations are relevant. Often reported as one or more simple compact codes this element is often placed adjacent to the result value in reports and flow sheets to signal the meaning/normalcy status of the result.

              Control0..*
              BindingUnless not suitable, these codes SHALL be taken from ObservationInterpretationCodes
              (extensible to http://hl7.org/fhir/ValueSet/observation-interpretation)

              Codes identifying interpretations of observations.

              TypeCodeableConcept
              Is Modifierfalse
              Summaryfalse
              Requirements

              For some results, particularly numeric results, an interpretation is necessary to fully understand the significance of a result.

              Alternate NamesAbnormal Flag
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              104. Observation.note
              Definition

              Comments about the observation or the results.

              ShortCOMMENT: the actual comment. OK/CHANGE/REFUSE/CANCEL/SUSPEND: the reason why the action was done.
              Comments

              May include general statements about the observation, or statements about significant, unexpected or unreliable results values, or information about its source when relevant to its interpretation.

              Control1..1
              TypeAnnotation
              Is Modifierfalse
              Summaryfalse
              Requirements

              Need to be able to provide free text additional information.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              106. Observation.bodySite
              Definition

              Indicates the site on the subject's body where the observation was made (i.e. the target site).

              ShortObserved body part
              Comments

              Only used if not implicit in code found in Observation.code. In many systems, this may be represented as a related observation instead of an inline component.

              If the use case requires BodySite to be handled as a separate resource (e.g. to identify and track separately) then use the standard extension bodySite.

              Control0..1
              BindingFor example codes, see SNOMEDCTBodyStructures
              (example to http://hl7.org/fhir/ValueSet/body-site)

              Codes describing anatomical locations. May include laterality.

              TypeCodeableConcept
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              108. Observation.method
              Definition

              Indicates the mechanism used to perform the observation.

              ShortHow it was done
              Comments

              Only used if not implicit in code for Observation.code.

              Control0..1
              BindingFor example codes, see ObservationMethods
              (example to http://hl7.org/fhir/ValueSet/observation-methods)

              Methods for simple observations.

              TypeCodeableConcept
              Is Modifierfalse
              Summaryfalse
              Requirements

              In some cases, method can impact results and is thus used for determining whether results can be compared or determining significance of results.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              110. Observation.specimen
              Definition

              The specimen that was used when this observation was made.

              ShortSpecimen used for this observation
              Comments

              Should only be used if not implicit in code found in Observation.code. Observations are not made on specimens themselves; they are made on a subject, but in many cases by the means of a specimen. Note that although specimens are often involved, they are not always tracked and reported explicitly. Also note that observation resources may be used in contexts that track the specimen explicitly (e.g. Diagnostic Report).

              Control0..1
              TypeReference(Specimen)
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              112. Observation.device
              Definition

              The device used to generate the observation data.

              Short(Measurement) Device
              Comments

              Note that this is not meant to represent a device involved in the transmission of the result, e.g., a gateway. Such devices may be documented using the Provenance resource where relevant.

              Control0..1
              TypeReference(Device, DeviceMetric)
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              114. Observation.referenceRange
              Definition

              Guidance on how to interpret the value by comparison to a normal or recommended range. Multiple reference ranges are interpreted as an "OR". In other words, to represent two distinct target populations, two referenceRange elements would be used.

              ShortProvides guide for interpretation
              Comments

              Most observations only have one generic reference range. Systems MAY choose to restrict to only supplying the relevant reference range based on knowledge about the patient (e.g., specific to the patient's age, gender, weight and other factors), but this might not be possible or appropriate. Whenever more than one reference range is supplied, the differences between them SHOULD be provided in the reference range and/or age properties.

              Control0..*
              TypeBackboneElement
              Is Modifierfalse
              Summaryfalse
              Requirements

              Knowing what values are considered "normal" can help evaluate the significance of a particular result. Need to be able to provide multiple reference ranges for different contexts.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              obs-3: Must have at least a low or a high or text (low.exists() or high.exists() or text.exists())
              116. Observation.referenceRange.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              118. Observation.referenceRange.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              120. Observation.referenceRange.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              122. Observation.referenceRange.low
              Definition

              The value of the low bound of the reference range. The low bound of the reference range endpoint is inclusive of the value (e.g. reference range is >=5 - <=9). If the low bound is omitted, it is assumed to be meaningless (e.g. reference range is <=2.3).

              ShortLow Range, if relevant
              Control0..1
              This element is affected by the following invariants: obs-3
              TypeQuantity(SimpleQuantity)
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              124. Observation.referenceRange.high
              Definition

              The value of the high bound of the reference range. The high bound of the reference range endpoint is inclusive of the value (e.g. reference range is >=5 - <=9). If the high bound is omitted, it is assumed to be meaningless (e.g. reference range is >= 2.3).

              ShortHigh Range, if relevant
              Control0..1
              This element is affected by the following invariants: obs-3
              TypeQuantity(SimpleQuantity)
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              126. Observation.referenceRange.type
              Definition

              Codes to indicate the what part of the targeted reference population it applies to. For example, the normal or therapeutic range.

              ShortReference range qualifier
              Comments

              This SHOULD be populated if there is more than one range. If this element is not present then the normal range is assumed.

              Control0..1
              BindingThe codes SHOULD be taken from ObservationReferenceRangeMeaningCodes
              (preferred to http://hl7.org/fhir/ValueSet/referencerange-meaning)

              Code for the meaning of a reference range.

              TypeCodeableConcept
              Is Modifierfalse
              Summaryfalse
              Requirements

              Need to be able to say what kind of reference range this is - normal, recommended, therapeutic, etc., - for proper interpretation.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              128. Observation.referenceRange.appliesTo
              Definition

              Codes to indicate the target population this reference range applies to. For example, a reference range may be based on the normal population or a particular sex or race. Multiple appliesTo are interpreted as an "AND" of the target populations. For example, to represent a target population of African American females, both a code of female and a code for African American would be used.

              ShortReference range population
              Comments

              This SHOULD be populated if there is more than one range. If this element is not present then the normal population is assumed.

              Control0..*
              BindingFor example codes, see ObservationReferenceRangeAppliesToCodes
              (example to http://hl7.org/fhir/ValueSet/referencerange-appliesto)

              Codes identifying the population the reference range applies to.

              TypeCodeableConcept
              Is Modifierfalse
              Summaryfalse
              Requirements

              Need to be able to identify the target population for proper interpretation.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              130. Observation.referenceRange.age
              Definition

              The age at which this reference range is applicable. This is a neonatal age (e.g. number of weeks at term) if the meaning says so.

              ShortApplicable age range, if relevant
              Control0..1
              TypeRange
              Is Modifierfalse
              Summaryfalse
              Requirements

              Some analytes vary greatly over age.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              132. Observation.referenceRange.text
              Definition

              Text based reference range in an observation which may be used when a quantitative range is not appropriate for an observation. An example would be a reference value of "Negative" or a list or table of "normals".

              ShortText based reference range in an observation
              Control0..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              134. Observation.hasMember
              Definition

              This observation is a group observation (e.g. a battery, a panel of tests, a set of vital sign measurements) that includes the target as a member of the group.

              ShortRelated resource that belongs to the Observation group
              Comments

              When using this element, an observation will typically have either a value or a set of related resources, although both may be present in some cases. For a discussion on the ways Observations can assembled in groups together, see Notes below. Note that a system may calculate results from QuestionnaireResponse into a final score and represent the score as an Observation.

              Control0..*
              TypeReference(Observation, QuestionnaireResponse, MolecularSequence)
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              136. Observation.derivedFrom
              Definition

              The target resource that represents a measurement from which this observation value is derived. For example, a calculated anion gap or a fetal measurement based on an ultrasound image.

              ShortRelated measurements the observation is made from
              Comments

              All the reference choices that are listed in this element can represent clinical observations and other measurements that may be the source for a derived value. The most common reference will be another Observation. For a discussion on the ways Observations can assembled in groups together, see Notes below.

              Control0..*
              TypeReference(DocumentReference, ImagingStudy, Media, QuestionnaireResponse, Observation, MolecularSequence)
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              138. Observation.component
              Definition

              Some observations have multiple component observations. These component observations are expressed as separate code value pairs that share the same attributes. Examples include systolic and diastolic component observations for blood pressure measurement and multiple component observations for genetics observations.

              ShortComponent results
              Comments

              For a discussion on the ways Observations can be assembled in groups together see Notes below.

              Control0..*
              TypeBackboneElement
              Is Modifierfalse
              Summarytrue
              Requirements

              Component observations share the same attributes in the Observation resource as the primary observation and are always treated a part of a single observation (they are not separable). However, the reference range for the primary observation value is not inherited by the component values and is required when appropriate for each component observation.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              140. Observation.component.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              142. Observation.component.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              144. Observation.component.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              146. Observation.component.code
              Definition

              Describes what was observed. Sometimes this is called the observation "code".

              ShortType of component observation (code / type)
              Comments

              All code-value and component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

              Control1..1
              BindingFor example codes, see LOINCCodes
              (example to http://hl7.org/fhir/ValueSet/observation-codes)

              Codes identifying names of simple observations.

              TypeCodeableConcept
              Is Modifierfalse
              Summarytrue
              Requirements

              Knowing what kind of observation is being made is essential to understanding the observation.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              148. Observation.component.value[x]
              Definition

              The information determined as a result of making the observation, if the information has a simple value.

              ShortActual component result
              Comments

              Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the Notes section below.

              Control0..1
              TypeChoice of: Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period
              [x] NoteSee Choice of Data Types for further information about how to use [x]
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Requirements

              An observation exists to have a value, though it might not if it is in error, or if it represents a group of observations.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              150. Observation.component.dataAbsentReason
              Definition

              Provides a reason why the expected value in the element Observation.component.value[x] is missing.

              ShortWhy the component result is missing
              Comments

              "Null" or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. For example, measurement values for a serology test could be "detected", "not detected", "inconclusive", or "test not done".

              The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For example, the dataAbsentReason code "error" could be used when the measurement was not completed. Because of these options, use-case agreements are required to interpret general observations for exceptional values.

              Control0..1
              This element is affected by the following invariants: obs-6
              BindingUnless not suitable, these codes SHALL be taken from DataAbsentReason
              (extensible to http://hl7.org/fhir/ValueSet/data-absent-reason)

              Codes specifying why the result (Observation.value[x]) is missing.

              TypeCodeableConcept
              Is Modifierfalse
              Summaryfalse
              Requirements

              For many results it is necessary to handle exceptional values in measurements.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              152. Observation.component.interpretation
              Definition

              A categorical assessment of an observation value. For example, high, low, normal.

              ShortHigh, low, normal, etc.
              Comments

              Historically used for laboratory results (known as 'abnormal flag' ), its use extends to other use cases where coded interpretations are relevant. Often reported as one or more simple compact codes this element is often placed adjacent to the result value in reports and flow sheets to signal the meaning/normalcy status of the result.

              Control0..*
              BindingUnless not suitable, these codes SHALL be taken from ObservationInterpretationCodes
              (extensible to http://hl7.org/fhir/ValueSet/observation-interpretation)

              Codes identifying interpretations of observations.

              TypeCodeableConcept
              Is Modifierfalse
              Summaryfalse
              Requirements

              For some results, particularly numeric results, an interpretation is necessary to fully understand the significance of a result.

              Alternate NamesAbnormal Flag
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              154. Observation.component.referenceRange
              Definition

              Guidance on how to interpret the value by comparison to a normal or recommended range.

              ShortProvides guide for interpretation of component result
              Comments

              Most observations only have one generic reference range. Systems MAY choose to restrict to only supplying the relevant reference range based on knowledge about the patient (e.g., specific to the patient's age, gender, weight and other factors), but this might not be possible or appropriate. Whenever more than one reference range is supplied, the differences between them SHOULD be provided in the reference range and/or age properties.

              Control0..*
              TypeSee ttp://hl7.org/fhir/StructureDefinition/Observation#Observation.referenceRange
              Is Modifierfalse
              Summaryfalse
              Requirements

              Knowing what values are considered "normal" can help evaluate the significance of a particular result. Need to be able to provide multiple reference ranges for different contexts.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))