CH EMED (R4)
5.0.0-ballot - ballot Switzerland flag

This page is part of the CH EMED (R4) (v5.0.0-ballot: STU 5 Ballot 1) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions

Resource Profile: CHEMEDMedicationStatement - Detailed Descriptions

Active as of 2024-05-16

Definitions for the ch-emed-medicationstatement resource profile.

Guidance on how to interpret the contents of this table can be found here

0. MedicationStatement
ShortCH EMED MedicationStatement (MTP and basis)
Invariantsch-dosage-medstat: If one dosage element is present, it should not have a sequence number. If more than one dosage element is present, the base entry has the sequence number 1. ((dosage.count() > 1 implies dosage.where($this.conformsTo('http://fhir.ch/ig/ch-emed/StructureDefinition/ch-emed-dosage') and sequence = 1).exists()) and (dosage.count() = 1 implies dosage.single().sequence.exists().not()))
2. MedicationStatement.contained
Control1..?
4. MedicationStatement.identifier
ShortMedicationStatement Identifier
NoteThis is a business identifier, not a resource identifier (see discussion)
Control1..1
6. MedicationStatement.identifier.system
Control1..?
Fixed Valueurn:ietf:rfc:3986
8. MedicationStatement.identifier.value
ShortIdentifier value as UUID
Control1..?
Example<br/><b>CH EMED</b>:urn:uuid:daa8cd41-34a1-4a9c-9a6d-cd3f850142e9
10. MedicationStatement.medication[x]
[x] NoteSee Choice of Data Types for further information about how to use [x]
SlicingThis element introduces a set of slices on MedicationStatement.medication[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • type @ $this
  • 12. MedicationStatement.medication[x]:medicationReference
    Slice NamemedicationReference
    ShortReference to the contained medication
    Control0..1
    TypeReference(CH EMED Medication)contained
    [x] NoteSee Choice of Data Types for further information about how to use [x]
    14. MedicationStatement.subject
    ShortPatient
    TypeReference(CH Core Patient)
    16. MedicationStatement.subject.reference
    Control1..?
    18. MedicationStatement.dateAsserted
    Control1..?
    20. MedicationStatement.informationSource
    ShortThe author of the medical decision, see also 'Guidance - Authorship'
    Control1..?
    TypeReference(CH EMED PractitionerRole, CH Core Patient EPR, RelatedPerson)
    22. MedicationStatement.informationSource.reference
    Control1..?
    24. MedicationStatement.reasonCode
    ShortTreatment reason
    26. MedicationStatement.dosage
    ShortHow the medication should be taken
    Control1..?
    SlicingThis element introduces a set of slices on MedicationStatement.dosage. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
    • profile @ $this
    • 28. MedicationStatement.dosage:baseEntry
      Slice NamebaseEntry
      ShortBase entry of the dosage instruction
      Control1..1
      TypeDosage(CH EMED Dosage (MedicationStatement / MedicationDispense))
      30. MedicationStatement.dosage:additionalEntry
      Slice NameadditionalEntry
      ShortAdditional entry of the dosage instruction
      Control0..*
      TypeDosage(CH EMED Dosage Split)

      Guidance on how to interpret the contents of this table can be found here

      0. MedicationStatement
      Definition

      A record of a medication that is being consumed by a patient. A MedicationStatement may indicate that the patient may be taking the medication now or has taken the medication in the past or will be taking the medication in the future. The source of this information can be the patient, significant other (such as a family member or spouse), or a clinician. A common scenario where this information is captured is during the history taking process during a patient visit or stay. The medication information may come from sources such as the patient's memory, from a prescription bottle, or from a list of medications the patient, clinician or other party maintains.

      The primary difference between a medication statement and a medication administration is that the medication administration has complete administration information and is based on actual administration information from the person who administered the medication. A medication statement is often, if not always, less specific. There is no required date/time when the medication was administered, in fact we only know that a source has reported the patient is taking this medication, where details such as time, quantity, or rate or even medication product may be incomplete or missing or less precise. As stated earlier, the medication statement information may come from the patient's memory, from a prescription bottle or from a list of medications the patient, clinician or other party maintains. Medication administration is more formal and is not missing detailed information.

      ShortCH EMED MedicationStatement (MTP and basis)Record of medication being taken by a patient
      Comments

      When interpreting a medicationStatement, the value of the status and NotTaken needed to be considered: MedicationStatement.status + MedicationStatement.wasNotTaken Status=Active + NotTaken=T = Not currently taking Status=Completed + NotTaken=T = Not taken in the past Status=Intended + NotTaken=T = No intention of taking Status=Active + NotTaken=F = Taking, but not as prescribed Status=Active + NotTaken=F = Taking Status=Intended +NotTaken= F = Will be taking (not started) Status=Completed + NotTaken=F = Taken in past Status=In Error + NotTaken=N/A = In Error.

      Control0..*
      Is Modifierfalse
      Summaryfalse
      Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
      dom-6: A resource should have narrative for robust management (text.`div`.exists())
      ch-dosage-medstat: If one dosage element is present, it should not have a sequence number. If more than one dosage element is present, the base entry has the sequence number 1. ((dosage.count() > 1 implies dosage.where($this.conformsTo('http://fhir.ch/ig/ch-emed/StructureDefinition/ch-emed-dosage') and sequence = 1).exists()) and (dosage.count() = 1 implies dosage.single().sequence.exists().not()))
      2. MedicationStatement.implicitRules
      Definition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

      ShortA set of rules under which this content was created
      Comments

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

      Control0..1
      Typeuri
      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      4. MedicationStatement.contained
      Definition

      These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

      ShortContained, inline Resources
      Comments

      This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

      Control10..*
      TypeResource
      Is Modifierfalse
      Summaryfalse
      Alternate Namesinline resources, anonymous resources, contained resources
      6. MedicationStatement.extension:substitution
      Slice Namesubstitution
      Definition

      Optional Extension Element - found in all resources.

      ShortWhether substitution is allowed or not
      Control0..1
      This element is affected by the following invariants: ele-1
      TypeExtension(Substitution) (Extension Type: CodeableConcept)
      Is Modifierfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      8. MedicationStatement.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
      Summaryfalse
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      10. MedicationStatement.identifier
      Definition

      Identifiers associated with this Medication Statement that are defined by business processes and/or used to refer to it when a direct URL reference to the resource itself is not appropriate. They are business identifiers assigned to this resource by the performer or other systems and remain constant as the resource is updated and propagates from server to server.

      ShortMedicationStatement IdentifierExternal identifier
      Comments

      This is a business identifier, not a resource identifier.

      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control10..1*
      TypeIdentifier
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      12. MedicationStatement.identifier.use
      Definition

      The purpose of this identifier.

      Shortusual | official | temp | secondary | old (If known)
      Comments

      Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

      Control0..1
      BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
      (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

      Identifies the purpose for this identifier, if known .

      Typecode
      Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      14. MedicationStatement.identifier.system
      Definition

      Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

      ShortThe namespace for the identifier value
      Comments

      Identifier.system is always case sensitive.

      Control10..1
      Typeuri
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

      Fixed Valueurn:ietf:rfc:3986
      Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      16. MedicationStatement.identifier.value
      Definition

      The portion of the identifier typically relevant to the user and which is unique within the context of the system.

      ShortIdentifier value as UUIDThe value that is unique
      Comments

      If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

      Control10..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Example<br/><b>General</b>:123456 <br/><b>CH EMED</b>:urn:uuid:daa8cd41-34a1-4a9c-9a6d-cd3f850142e9
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      18. MedicationStatement.status
      Definition

      A code representing the patient or other source's judgment about the state of the medication used that this statement is about. Generally, this will be active or completed.

      Shortactive | completed | entered-in-error | intended | stopped | on-hold | unknown | not-taken
      Comments

      MedicationStatement is a statement at a point in time. The status is only representative at the point when it was asserted. The value set for MedicationStatement.status contains codes that assert the status of the use of the medication by the patient (for example, stopped or on hold) as well as codes that assert the status of the medication statement itself (for example, entered in error).

      This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

      Control1..1
      BindingThe codes SHALL be taken from Medication Status Codeshttp://hl7.org/fhir/ValueSet/medication-statement-status|4.0.1
      (required to http://hl7.org/fhir/ValueSet/medication-statement-status|4.0.1)

      A coded concept indicating the current status of a MedicationStatement.

      Typecode
      Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      20. MedicationStatement.medication[x]
      Definition

      Identifies the medication being administered. This is either a link to a resource representing the details of the medication or a simple attribute carrying a code that identifies the medication from a known list of medications.

      ShortWhat medication was taken
      Comments

      If only a code is specified, then it needs to be a code for a specific product. If more information is required, then the use of the medication resource is recommended. For example, if you require form or lot number, then you must reference the Medication resource.

      Control1..1
      BindingFor example codes, see SNOMEDCTMedicationCodeshttp://hl7.org/fhir/ValueSet/medication-codes
      (example to http://hl7.org/fhir/ValueSet/medication-codes)

      A coded concept identifying the substance or product being taken.

      TypeChoice of: CodeableConcept, Reference(CH Core Medication, Medication)
      [x] NoteSee Choice of Data Types for further information about how to use [x]
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on MedicationStatement.medication[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • type @ $this
      • 22. MedicationStatement.medication[x]:medicationReference
        Slice NamemedicationReference
        Definition

        Identifies the medication being administered. This is either a link to a resource representing the details of the medication or a simple attribute carrying a code that identifies the medication from a known list of medications.

        ShortReference to the contained medicationWhat medication was taken
        Comments

        If only a code is specified, then it needs to be a code for a specific product. If more information is required, then the use of the medication resource is recommended. For example, if you require form or lot number, then you must reference the Medication resource.

        Control01..1
        TypeReference(CH EMED Medication, Medication)contained, CodeableConcept
        [x] NoteSee Choice of Data Types for further information about how to use [x]
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        24. MedicationStatement.subject
        Definition

        The person, animal or group who is/was taking the medication.

        ShortPatientWho is/was taking the medication
        Control1..1
        TypeReference(CH Core Patient, Patient, Group)
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        26. MedicationStatement.subject.reference
        Definition

        A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

        ShortLiteral reference, Relative, internal or absolute URL
        Comments

        Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

        Control10..1
        This element is affected by the following invariants: ref-1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        28. MedicationStatement.dateAsserted
        Definition

        The date when the medication statement was asserted by the information source.

        ShortWhen the statement was asserted?
        Control10..1
        TypedateTime
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        30. MedicationStatement.informationSource
        Definition

        The person or organization that provided the information about the taking of this medication. Note: Use derivedFrom when a MedicationStatement is derived from other resources, e.g. Claim or MedicationRequest.

        ShortThe author of the medical decision, see also 'Guidance - Authorship'Person or organization that provided the information about the taking of this medication
        Control10..1
        TypeReference(CH EMED PractitionerRole, CH Core Patient EPR, RelatedPerson, Patient, Practitioner, PractitionerRole, Organization)
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        32. MedicationStatement.informationSource.reference
        Definition

        A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

        ShortLiteral reference, Relative, internal or absolute URL
        Comments

        Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

        Control10..1
        This element is affected by the following invariants: ref-1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        34. MedicationStatement.reasonCode
        Definition

        A reason for why the medication is being/was taken.

        ShortTreatment reasonReason for why the medication is being/was taken
        Comments

        This could be a diagnosis code. If a full condition record exists or additional detail is needed, use reasonForUseReference.

        Control0..*
        BindingFor example codes, see Condition/Problem/DiagnosisCodeshttp://hl7.org/fhir/ValueSet/condition-code
        (example to http://hl7.org/fhir/ValueSet/condition-code)

        A coded concept identifying why the medication is being taken.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        36. MedicationStatement.dosage
        Definition

        Indicates how the medication is/was taken or should be taken by the patient.


        Indicates how the medication is/was or should be taken by the patient.

        ShortHow the medication should be takenDetails of how medication is/was taken or should be taken
        Comments

        The dates included in the dosage on a Medication Statement reflect the dates for a given dose. For example, "from November 1, 2016 to November 3, 2016, take one tablet daily and from November 4, 2016 to November 7, 2016, take two tablets daily." It is expected that this specificity may only be populated where the patient brings in their labeled container or where the Medication Statement is derived from a MedicationRequest.

        Control10..*
        TypeDosage(CH Core Dosage)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        SlicingThis element introduces a set of slices on MedicationStatement.dosage. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
        • profile @ $this
        • 38. MedicationStatement.dosage:baseEntry
          Slice NamebaseEntry
          Definition

          Indicates how the medication is/was taken or should be taken by the patient.


          Indicates how the medication is/was or should be taken by the patient.

          ShortBase entry of the dosage instructionDetails of how medication is/was taken or should be taken
          Comments

          The dates included in the dosage on a Medication Statement reflect the dates for a given dose. For example, "from November 1, 2016 to November 3, 2016, take one tablet daily and from November 4, 2016 to November 7, 2016, take two tablets daily." It is expected that this specificity may only be populated where the patient brings in their labeled container or where the Medication Statement is derived from a MedicationRequest.

          Control10..1*
          TypeDosage(CH EMED Dosage (MedicationStatement / MedicationDispense))
          Is Modifierfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ch-dosage-4: For split dosage timing event and dose/rate are required (sequence.exists() implies (timing.repeat.when.exists() and doseAndRate.dose.exists()))
          40. MedicationStatement.dosage:additionalEntry
          Slice NameadditionalEntry
          Definition

          Indicates how the medication is/was taken or should be taken by the patient.


          Indicates how the medication is/was or should be taken by the patient.

          ShortAdditional entry of the dosage instructionDetails of how medication is/was taken or should be taken
          Comments

          The dates included in the dosage on a Medication Statement reflect the dates for a given dose. For example, "from November 1, 2016 to November 3, 2016, take one tablet daily and from November 4, 2016 to November 7, 2016, take two tablets daily." It is expected that this specificity may only be populated where the patient brings in their labeled container or where the Medication Statement is derived from a MedicationRequest.

          Control0..*
          TypeDosage(CH EMED Dosage Split)
          Is Modifierfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

          Guidance on how to interpret the contents of this table can be found here

          0. MedicationStatement
          Definition

          A record of a medication that is being consumed by a patient. A MedicationStatement may indicate that the patient may be taking the medication now or has taken the medication in the past or will be taking the medication in the future. The source of this information can be the patient, significant other (such as a family member or spouse), or a clinician. A common scenario where this information is captured is during the history taking process during a patient visit or stay. The medication information may come from sources such as the patient's memory, from a prescription bottle, or from a list of medications the patient, clinician or other party maintains.

          The primary difference between a medication statement and a medication administration is that the medication administration has complete administration information and is based on actual administration information from the person who administered the medication. A medication statement is often, if not always, less specific. There is no required date/time when the medication was administered, in fact we only know that a source has reported the patient is taking this medication, where details such as time, quantity, or rate or even medication product may be incomplete or missing or less precise. As stated earlier, the medication statement information may come from the patient's memory, from a prescription bottle or from a list of medications the patient, clinician or other party maintains. Medication administration is more formal and is not missing detailed information.

          ShortCH EMED MedicationStatement (MTP and basis)
          Comments

          When interpreting a medicationStatement, the value of the status and NotTaken needed to be considered: MedicationStatement.status + MedicationStatement.wasNotTaken Status=Active + NotTaken=T = Not currently taking Status=Completed + NotTaken=T = Not taken in the past Status=Intended + NotTaken=T = No intention of taking Status=Active + NotTaken=F = Taking, but not as prescribed Status=Active + NotTaken=F = Taking Status=Intended +NotTaken= F = Will be taking (not started) Status=Completed + NotTaken=F = Taken in past Status=In Error + NotTaken=N/A = In Error.

          Control0..*
          Is Modifierfalse
          Summaryfalse
          Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
          dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
          dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
          dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
          dom-6: A resource should have narrative for robust management (text.`div`.exists())
          ch-dosage-medstat: If one dosage element is present, it should not have a sequence number. If more than one dosage element is present, the base entry has the sequence number 1. ((dosage.count() > 1 implies dosage.where($this.conformsTo('http://fhir.ch/ig/ch-emed/StructureDefinition/ch-emed-dosage') and sequence = 1).exists()) and (dosage.count() = 1 implies dosage.single().sequence.exists().not()))
          2. MedicationStatement.id
          Definition

          The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

          ShortLogical id of this artifact
          Comments

          The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

          Control0..1
          Typeid
          Is Modifierfalse
          Summarytrue
          4. MedicationStatement.meta
          Definition

          The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

          ShortMetadata about the resource
          Control0..1
          TypeMeta
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          6. MedicationStatement.implicitRules
          Definition

          A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

          ShortA set of rules under which this content was created
          Comments

          Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

          Control0..1
          Typeuri
          Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          8. MedicationStatement.language
          Definition

          The base language in which the resource is written.

          ShortLanguage of the resource content
          Comments

          Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

          Control0..1
          BindingThe codes SHOULD be taken from CommonLanguages
          (preferred to http://hl7.org/fhir/ValueSet/languages)

          A human language.

          Additional BindingsPurpose
          AllLanguagesMax Binding
          Typecode
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          10. MedicationStatement.text
          Definition

          A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

          ShortText summary of the resource, for human interpretation
          Comments

          Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

          Control0..1
          TypeNarrative
          Is Modifierfalse
          Summaryfalse
          Alternate Namesnarrative, html, xhtml, display
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          12. MedicationStatement.contained
          Definition

          These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

          ShortContained, inline Resources
          Comments

          This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

          Control1..*
          TypeResource
          Is Modifierfalse
          Summaryfalse
          Alternate Namesinline resources, anonymous resources, contained resources
          14. MedicationStatement.extension
          Definition

          An Extension

          ShortExtension
          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on MedicationStatement.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 16. MedicationStatement.extension:substitution
            Slice Namesubstitution
            Definition

            Optional Extension Element - found in all resources.

            ShortWhether substitution is allowed or not
            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(Substitution) (Extension Type: CodeableConcept)
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            18. MedicationStatement.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
            Summaryfalse
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            20. MedicationStatement.identifier
            Definition

            Identifiers associated with this Medication Statement that are defined by business processes and/or used to refer to it when a direct URL reference to the resource itself is not appropriate. They are business identifiers assigned to this resource by the performer or other systems and remain constant as the resource is updated and propagates from server to server.

            ShortMedicationStatement Identifier
            Comments

            This is a business identifier, not a resource identifier.

            NoteThis is a business identifier, not a resource identifier (see discussion)
            Control1..1
            TypeIdentifier
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            22. MedicationStatement.identifier.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            24. MedicationStatement.identifier.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on MedicationStatement.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 26. MedicationStatement.identifier.use
              Definition

              The purpose of this identifier.

              Shortusual | official | temp | secondary | old (If known)
              Comments

              Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

              Control0..1
              BindingThe codes SHALL be taken from IdentifierUse
              (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

              Identifies the purpose for this identifier, if known .

              Typecode
              Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Requirements

              Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              28. MedicationStatement.identifier.type
              Definition

              A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

              ShortDescription of identifier
              Comments

              This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

              Control0..1
              BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
              (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

              A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

              TypeCodeableConcept
              Is Modifierfalse
              Summarytrue
              Requirements

              Allows users to make use of identifiers when the identifier system is not known.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              30. MedicationStatement.identifier.system
              Definition

              Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

              ShortThe namespace for the identifier value
              Comments

              Identifier.system is always case sensitive.

              Control1..1
              Typeuri
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Requirements

              There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

              Fixed Valueurn:ietf:rfc:3986
              Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              32. MedicationStatement.identifier.value
              Definition

              The portion of the identifier typically relevant to the user and which is unique within the context of the system.

              ShortIdentifier value as UUID
              Comments

              If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Example<br/><b>General</b>:123456 <br/><b>CH EMED</b>:urn:uuid:daa8cd41-34a1-4a9c-9a6d-cd3f850142e9
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              34. MedicationStatement.identifier.period
              Definition

              Time period during which identifier is/was valid for use.

              ShortTime period when id is/was valid for use
              Control0..1
              TypePeriod
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              36. MedicationStatement.identifier.assigner
              Definition

              Organization that issued/manages the identifier.

              ShortOrganization that issued id (may be just text)
              Comments

              The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

              Control0..1
              TypeReference(Organization)
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              38. MedicationStatement.basedOn
              Definition

              A plan, proposal or order that is fulfilled in whole or in part by this event.

              ShortFulfils plan, proposal or order
              Control0..*
              TypeReference(MedicationRequest, CarePlan, ServiceRequest)
              Is Modifierfalse
              Summarytrue
              Requirements

              Allows tracing of authorization for the event and tracking whether proposals/recommendations were acted upon.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              40. MedicationStatement.partOf
              Definition

              A larger event of which this particular event is a component or step.

              ShortPart of referenced event
              Control0..*
              TypeReference(MedicationAdministration, MedicationDispense, MedicationStatement, Procedure, Observation)
              Is Modifierfalse
              Summarytrue
              Requirements

              This should not be used when indicating which resource a MedicationStatement has been derived from. If that is the use case, then MedicationStatement.derivedFrom should be used.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              42. MedicationStatement.status
              Definition

              A code representing the patient or other source's judgment about the state of the medication used that this statement is about. Generally, this will be active or completed.

              Shortactive | completed | entered-in-error | intended | stopped | on-hold | unknown | not-taken
              Comments

              MedicationStatement is a statement at a point in time. The status is only representative at the point when it was asserted. The value set for MedicationStatement.status contains codes that assert the status of the use of the medication by the patient (for example, stopped or on hold) as well as codes that assert the status of the medication statement itself (for example, entered in error).

              This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

              Control1..1
              BindingThe codes SHALL be taken from Medication Status Codes
              (required to http://hl7.org/fhir/ValueSet/medication-statement-status|4.0.1)

              A coded concept indicating the current status of a MedicationStatement.

              Typecode
              Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              44. MedicationStatement.statusReason
              Definition

              Captures the reason for the current state of the MedicationStatement.

              ShortReason for current status
              Comments

              This is generally only used for "exception" statuses such as "not-taken", "on-hold", "cancelled" or "entered-in-error". The reason for performing the event at all is captured in reasonCode, not here.

              Control0..*
              BindingFor example codes, see SNOMEDCTDrugTherapyStatusCodes
              (example to http://hl7.org/fhir/ValueSet/reason-medication-status-codes)

              A coded concept indicating the reason for the status of the statement.

              TypeCodeableConcept
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              46. MedicationStatement.category
              Definition

              Indicates where the medication is expected to be consumed or administered.

              ShortType of medication usage
              Control0..1
              BindingThe codes SHOULD be taken from Medication usage category codes
              (preferred to http://hl7.org/fhir/ValueSet/medication-statement-category)

              A coded concept identifying where the medication included in the MedicationStatement is expected to be consumed or administered.

              TypeCodeableConcept
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              48. MedicationStatement.medication[x]
              Definition

              Identifies the medication being administered. This is either a link to a resource representing the details of the medication or a simple attribute carrying a code that identifies the medication from a known list of medications.

              ShortWhat medication was taken
              Comments

              If only a code is specified, then it needs to be a code for a specific product. If more information is required, then the use of the medication resource is recommended. For example, if you require form or lot number, then you must reference the Medication resource.

              Control1..1
              BindingFor example codes, see SNOMEDCTMedicationCodes
              (example to http://hl7.org/fhir/ValueSet/medication-codes)

              A coded concept identifying the substance or product being taken.

              TypeChoice of: CodeableConcept, Reference(CH Core Medication)
              [x] NoteSee Choice of Data Types for further information about how to use [x]
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              SlicingThis element introduces a set of slices on MedicationStatement.medication[x]. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • type @ $this
              • 50. MedicationStatement.medication[x]:medicationReference
                Slice NamemedicationReference
                Definition

                Identifies the medication being administered. This is either a link to a resource representing the details of the medication or a simple attribute carrying a code that identifies the medication from a known list of medications.

                ShortReference to the contained medication
                Comments

                If only a code is specified, then it needs to be a code for a specific product. If more information is required, then the use of the medication resource is recommended. For example, if you require form or lot number, then you must reference the Medication resource.

                Control0..1
                TypeReference(CH EMED Medication)contained
                [x] NoteSee Choice of Data Types for further information about how to use [x]
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                52. MedicationStatement.subject
                Definition

                The person, animal or group who is/was taking the medication.

                ShortPatient
                Control1..1
                TypeReference(CH Core Patient)
                Is Modifierfalse
                Summarytrue
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                54. MedicationStatement.subject.id
                Definition

                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                ShortUnique id for inter-element referencing
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                56. MedicationStatement.subject.extension
                Definition

                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                ShortAdditional content defined by implementations
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                SlicingThis element introduces a set of slices on MedicationStatement.subject.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ url
                • 58. MedicationStatement.subject.reference
                  Definition

                  A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

                  ShortLiteral reference, Relative, internal or absolute URL
                  Comments

                  Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

                  Control1..1
                  This element is affected by the following invariants: ref-1
                  Typestring
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  60. MedicationStatement.subject.type
                  Definition

                  The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

                  The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

                  ShortType the reference refers to (e.g. "Patient")
                  Comments

                  This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

                  Control0..1
                  BindingUnless not suitable, these codes SHALL be taken from ResourceType
                  (extensible to http://hl7.org/fhir/ValueSet/resource-types)

                  Aa resource (or, for logical models, the URI of the logical model).

                  Typeuri
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  62. MedicationStatement.subject.identifier
                  Definition

                  An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

                  ShortLogical reference, when literal reference is not known
                  Comments

                  When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

                  When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

                  Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

                  Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

                  NoteThis is a business identifier, not a resource identifier (see discussion)
                  Control0..1
                  TypeIdentifier
                  Is Modifierfalse
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  64. MedicationStatement.subject.display
                  Definition

                  Plain text narrative that identifies the resource in addition to the resource reference.

                  ShortText alternative for the resource
                  Comments

                  This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

                  Control0..1
                  Typestring
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  66. MedicationStatement.context
                  Definition

                  The encounter or episode of care that establishes the context for this MedicationStatement.

                  ShortEncounter / Episode associated with MedicationStatement
                  Control0..1
                  TypeReference(Encounter, EpisodeOfCare)
                  Is Modifierfalse
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  68. MedicationStatement.effective[x]
                  Definition

                  The interval of time during which it is being asserted that the patient is/was/will be taking the medication (or was not taking, when the MedicationStatement.taken element is No).

                  ShortThe date/time or interval when the medication is/was/will be taken
                  Comments

                  This attribute reflects the period over which the patient consumed the medication and is expected to be populated on the majority of Medication Statements. If the medication is still being taken at the time the statement is recorded, the "end" date will be omitted. The date/time attribute supports a variety of dates - year, year/month and exact date. If something more than this is required, this should be conveyed as text.

                  Control0..1
                  TypeChoice of: dateTime, Period
                  [x] NoteSee Choice of Data Types for further information about how to use [x]
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  70. MedicationStatement.dateAsserted
                  Definition

                  The date when the medication statement was asserted by the information source.

                  ShortWhen the statement was asserted?
                  Control1..1
                  TypedateTime
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  72. MedicationStatement.informationSource
                  Definition

                  The person or organization that provided the information about the taking of this medication. Note: Use derivedFrom when a MedicationStatement is derived from other resources, e.g. Claim or MedicationRequest.

                  ShortThe author of the medical decision, see also 'Guidance - Authorship'
                  Control1..1
                  TypeReference(CH EMED PractitionerRole, CH Core Patient EPR, RelatedPerson)
                  Is Modifierfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  74. MedicationStatement.informationSource.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  76. MedicationStatement.informationSource.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  SlicingThis element introduces a set of slices on MedicationStatement.informationSource.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • value @ url
                  • 78. MedicationStatement.informationSource.reference
                    Definition

                    A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

                    ShortLiteral reference, Relative, internal or absolute URL
                    Comments

                    Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

                    Control1..1
                    This element is affected by the following invariants: ref-1
                    Typestring
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    80. MedicationStatement.informationSource.type
                    Definition

                    The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

                    The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

                    ShortType the reference refers to (e.g. "Patient")
                    Comments

                    This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

                    Control0..1
                    BindingUnless not suitable, these codes SHALL be taken from ResourceType
                    (extensible to http://hl7.org/fhir/ValueSet/resource-types)

                    Aa resource (or, for logical models, the URI of the logical model).

                    Typeuri
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    82. MedicationStatement.informationSource.identifier
                    Definition

                    An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

                    ShortLogical reference, when literal reference is not known
                    Comments

                    When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

                    When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

                    Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

                    Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

                    NoteThis is a business identifier, not a resource identifier (see discussion)
                    Control0..1
                    TypeIdentifier
                    Is Modifierfalse
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    84. MedicationStatement.informationSource.display
                    Definition

                    Plain text narrative that identifies the resource in addition to the resource reference.

                    ShortText alternative for the resource
                    Comments

                    This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

                    Control0..1
                    Typestring
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    86. MedicationStatement.derivedFrom
                    Definition

                    Allows linking the MedicationStatement to the underlying MedicationRequest, or to other information that supports or is used to derive the MedicationStatement.

                    ShortAdditional supporting information
                    Comments

                    Likely references would be to MedicationRequest, MedicationDispense, Claim, Observation or QuestionnaireAnswers. The most common use cases for deriving a MedicationStatement comes from creating a MedicationStatement from a MedicationRequest or from a lab observation or a claim. it should be noted that the amount of information that is available varies from the type resource that you derive the MedicationStatement from.

                    Control0..*
                    TypeReference(Resource)
                    Is Modifierfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    88. MedicationStatement.reasonCode
                    Definition

                    A reason for why the medication is being/was taken.

                    ShortTreatment reason
                    Comments

                    This could be a diagnosis code. If a full condition record exists or additional detail is needed, use reasonForUseReference.

                    Control0..*
                    BindingFor example codes, see Condition/Problem/DiagnosisCodes
                    (example to http://hl7.org/fhir/ValueSet/condition-code)

                    A coded concept identifying why the medication is being taken.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    90. MedicationStatement.reasonReference
                    Definition

                    Condition or observation that supports why the medication is being/was taken.

                    ShortCondition or observation that supports why the medication is being/was taken
                    Comments

                    This is a reference to a condition that is the reason why the medication is being/was taken. If only a code exists, use reasonForUseCode.

                    Control0..*
                    TypeReference(Condition, Observation, DiagnosticReport)
                    Is Modifierfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    92. MedicationStatement.note
                    Definition

                    Provides extra information about the medication statement that is not conveyed by the other attributes.

                    ShortFurther information about the statement
                    Control0..*
                    TypeAnnotation
                    Is Modifierfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    94. MedicationStatement.dosage
                    Definition

                    Indicates how the medication is/was taken or should be taken by the patient.

                    ShortHow the medication should be taken
                    Comments

                    The dates included in the dosage on a Medication Statement reflect the dates for a given dose. For example, "from November 1, 2016 to November 3, 2016, take one tablet daily and from November 4, 2016 to November 7, 2016, take two tablets daily." It is expected that this specificity may only be populated where the patient brings in their labeled container or where the Medication Statement is derived from a MedicationRequest.

                    Control1..*
                    TypeDosage(CH Core Dosage)
                    Is Modifierfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    SlicingThis element introduces a set of slices on MedicationStatement.dosage. The slices areUnordered and Closed, and can be differentiated using the following discriminators:
                    • profile @ $this
                    • 96. MedicationStatement.dosage:baseEntry
                      Slice NamebaseEntry
                      Definition

                      Indicates how the medication is/was taken or should be taken by the patient.

                      ShortBase entry of the dosage instruction
                      Comments

                      The dates included in the dosage on a Medication Statement reflect the dates for a given dose. For example, "from November 1, 2016 to November 3, 2016, take one tablet daily and from November 4, 2016 to November 7, 2016, take two tablets daily." It is expected that this specificity may only be populated where the patient brings in their labeled container or where the Medication Statement is derived from a MedicationRequest.

                      Control1..1
                      TypeDosage(CH EMED Dosage (MedicationStatement / MedicationDispense))
                      Is Modifierfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ch-dosage-4: For split dosage timing event and dose/rate are required (sequence.exists() implies (timing.repeat.when.exists() and doseAndRate.dose.exists()))
                      98. MedicationStatement.dosage:additionalEntry
                      Slice NameadditionalEntry
                      Definition

                      Indicates how the medication is/was taken or should be taken by the patient.

                      ShortAdditional entry of the dosage instruction
                      Comments

                      The dates included in the dosage on a Medication Statement reflect the dates for a given dose. For example, "from November 1, 2016 to November 3, 2016, take one tablet daily and from November 4, 2016 to November 7, 2016, take two tablets daily." It is expected that this specificity may only be populated where the patient brings in their labeled container or where the Medication Statement is derived from a MedicationRequest.

                      Control0..*
                      TypeDosage(CH EMED Dosage Split)
                      Is Modifierfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))