CH EMED EPR
1.0.0 - trial-use Switzerland flag

This page is part of the FHIR eMedication exchange formats for the implementation effort of CARA within its EPR community (v1.0.0: STU1) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions

Resource Profile: CHEMEDEPRMedicationMedicationDispense - Detailed Descriptions

Draft as of 2024-01-26

Definitions for the ch-emed-epr-medication-medicationdispense resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Medication
2. Medication.meta
4. Medication.meta.extension
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
6. Medication.meta.versionId
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
8. Medication.meta.lastUpdated
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
10. Medication.meta.source
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
12. Medication.meta.security
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
14. Medication.meta.tag
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
16. Medication.implicitRules
Comments

...All modifiers SHALL be documented in the profile, in order to be usable.

Control0..0
18. Medication.extension
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
20. Medication.modifierExtension
Comments

...All modifiers SHALL be documented in the profile, in order to be usable.

Control0..0
22. Medication.code
ShortCodes that identify this medication. GTIN or ATC code SHOULD be specified. See also treatment guidance page.
Control1..?
24. Medication.code.id
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
26. Medication.code.extension
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
28. Medication.code.coding:GTIN
Slice NameGTIN
Control0..1
30. Medication.code.coding:GTIN.extension
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
32. Medication.code.coding:GTIN.version
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
NoteThis is a business versionId, not a resource version id (see discussion)
Standards StatusDraft (from Trial Use)
34. Medication.code.coding:GTIN.userSelected
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
36. Medication.code.coding:ATC
Slice NameATC
Control0..1
38. Medication.code.coding:ATC.extension
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
40. Medication.code.coding:ATC.version
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
NoteThis is a business versionId, not a resource version id (see discussion)
Standards StatusDraft (from Trial Use)
42. Medication.code.coding:ATC.userSelected
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
44. Medication.status
Pattern Valueactive
46. Medication.manufacturer
TypeReference(CH EMED EPR Organization)
48. Medication.form
50. Medication.form.extension
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
52. Medication.form.coding
54. Medication.form.coding.extension
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
56. Medication.form.coding.version
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
NoteThis is a business versionId, not a resource version id (see discussion)
Standards StatusDraft (from Trial Use)
58. Medication.form.coding.userSelected
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
60. Medication.form.text
Control1..?
62. Medication.ingredient
ShortIngredients SHOULD be specified. See also treatment guidance page.
64. Medication.ingredient.id
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
66. Medication.ingredient.extension
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
68. Medication.ingredient.modifierExtension
Comments

...All modifiers SHALL be documented in the profile, in order to be usable.

Control0..0
70. Medication.ingredient.item[x]:itemCodeableConcept
Slice NameitemCodeableConcept
TypeCodeableConcept
[x] NoteSee Choice of Data Types for further information about how to use [x]
72. Medication.ingredient.item[x]:itemCodeableConcept.id
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
74. Medication.ingredient.item[x]:itemCodeableConcept.extension
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
76. Medication.batch
78. Medication.batch.id
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
80. Medication.batch.extension
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Standards StatusDraft (from Trial Use)
82. Medication.batch.modifierExtension
Comments

...All modifiers SHALL be documented in the profile, in order to be usable.

Control0..0

Guidance on how to interpret the contents of this table can be found here

0. Medication
Definition

This resource is primarily used for the identification and definition of a medication for the purposes of prescribing, dispensing, and administering a medication as well as for making statements about medication use.

ShortCH EMED Medication (MedicationDispense)Definition of a Medication
Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
ch-emed-med-1: Medication or ingredient name has to be specified (code.text.exists() or ingredient.item.text.exists())
2. Medication.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. All modifiers SHALL be documented in the profile, in order to be usable.


Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..01
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Medication.extension
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.


May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Short✕ This element is not supportedAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. Medication.modifierExtension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensionExtensions that cannot be ignored
Comments

All modifiers SHALL be documented in the profile, in order to be usable.


There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
8. Medication.code
Definition

A code (or set of codes) that specify this medication, or a textual description if no code is available. Usage note: This could be a standard medication code such as a code from RxNorm, SNOMED CT, IDMP etc. It could also be a national or local formulary code, optionally with translations to other code systems.

ShortCodes that identify this medication. GTIN or ATC code SHOULD be specified. See also treatment guidance page.
Comments

Depending on the context of use, the code that was actually selected by the user (prescriber, dispenser, etc.) will have the coding.userSelected set to true. As described in the coding datatype: "A coding may be marked as a "userSelected" if a user selected the particular coded value in a user interface (e.g. the user selects an item in a pick-list). If a user selected coding exists, it is the preferred choice for performing translations etc. Other codes can only be literal translations to alternative code systems, or codes at a lower level of granularity (e.g. a generic code for a vendor-specific primary one).

Control10..1
BindingFor example codes, see SNOMEDCTMedicationCodeshttp://hl7.org/fhir/ValueSet/medication-codes
(example to http://hl7.org/fhir/ValueSet/medication-codes
TypeCodeableConcept
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Medication.code.id
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.


Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short✕ This element is not supportedUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
12. Medication.code.extension
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Short✕ This element is not supportedAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Medication.code.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
14. Medication.code.coding
Definition

A reference to a code defined by a terminology system.

ShortCode of the medicationCode defined by a terminology system
Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

Control0..*
TypeCoding
Is Modifierfalse
Summarytrue
Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Medication.code.coding. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ system
16. Medication.code.coding:GTIN
Slice NameGTIN
Definition

A reference to a code defined by a terminology system.

ShortUse GTIN for Swiss productsCode defined by a terminology system
Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

Control0..1*
TypeCoding
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. Medication.code.coding:GTIN.extension
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Short✕ This element is not supportedAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Medication.code.coding.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
20. Medication.code.coding:GTIN.system
Definition

The identification of the code system that defines the meaning of the symbol in the code.

ShortGlobal Trade Item Number (GS1)Identity of the terminology system
Comments

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

Control10..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to be unambiguous about the source of the definition of the symbol.

Fixed Valueurn:oid:2.51.1.1
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. Medication.code.coding:GTIN.version
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.


The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

Short✕ This element is not supportedVersion of the system - if relevant
Comments

Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

NoteThis is a business versionId, not a resource version id (see discussion)
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. Medication.code.coding:GTIN.code
Definition

A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

ShortSymbol in syntax defined by the system
Control10..1
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to refer to a particular code in the system.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Medication.code.coding:GTIN.userSelected
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.


Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

Short✕ This element is not supportedIf this coding was chosen directly by the user
Comments

Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

Control0..1
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. Medication.code.coding:ATC
Slice NameATC
Definition

A reference to a code defined by a terminology system.

ShortUse ATC for foreign productsCode defined by a terminology system
Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

Control0..1*
TypeCoding
Is Modifierfalse
Summarytrue
Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. Medication.code.coding:ATC.extension
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Short✕ This element is not supportedAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Medication.code.coding.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
32. Medication.code.coding:ATC.system
Definition

The identification of the code system that defines the meaning of the symbol in the code.

ShortAnatomical Therapeutic Chemical (ATC) ClassificationIdentity of the terminology system
Comments

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

Control10..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to be unambiguous about the source of the definition of the symbol.

Fixed Valuehttp://www.whocc.no/atc
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. Medication.code.coding:ATC.version
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.


The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

Short✕ This element is not supportedVersion of the system - if relevant
Comments

Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

NoteThis is a business versionId, not a resource version id (see discussion)
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. Medication.code.coding:ATC.code
Definition

A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

ShortSymbol in syntax defined by the system
Control10..1
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to refer to a particular code in the system.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. Medication.code.coding:ATC.userSelected
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.


Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

Short✕ This element is not supportedIf this coding was chosen directly by the user
Comments

Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

Control0..1
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. Medication.code.text
Definition

A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

ShortMedication namePlain text representation of the concept
Comments

Very often the text is the same as a displayName of one of the codings.

Control10..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. Medication.status
Definition

A code to indicate if the medication is in active use.

Shortactive | inactive | entered-in-error
Comments

This status is intended to identify if the medication in a local system is in active use within a drug database or inventory. For example, a pharmacy system may create a new drug file record for a compounded product "ABC Hospital Special Cream" with an active status. At some point in the future, it may be determined that the drug record was created with an error and the status is changed to "entered in error". This status is not intended to specify if a medication is part of a particular formulary. It is possible that the drug record may be referenced by multiple formularies or catalogues and each of those entries would have a separate status.

Control0..1
BindingThe codes SHALL be taken from Medication Status Codeshttp://hl7.org/fhir/ValueSet/medication-status|4.0.1
(required to http://hl7.org/fhir/ValueSet/medication-status|4.0.1
Typecode
Is Modifiertrue because This element changes the interpretation of all descriptive attributes.
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Pattern Valueactive
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
44. Medication.manufacturer
Definition

Describes the details of the manufacturer of the medication product. This is not intended to represent the distributor of a medication product.

ShortManufacturer of the item
Control0..1
TypeReference(CH EMED EPR Organization, Organization)
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. Medication.form
Definition

Describes the form of the item. Powder; tablets; capsule.

ShortGalenic formpowder | tablets | capsule +
Comments

When Medication is referenced from MedicationRequest, this is the ordered form. When Medication is referenced within MedicationDispense, this is the dispensed form. When Medication is referenced within MedicationAdministration, this is administered form.

Control0..1
BindingThe codes SHALL be taken from For example codes, see EDQM - Pharmaceutical Dose Formhttp://hl7.org/fhir/ValueSet/medication-form-codes
(required to http://fhir.ch/ig/ch-emed/ValueSet/edqm-pharmaceuticaldoseform
TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
48. Medication.form.extension
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Short✕ This element is not supportedAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Medication.form.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
50. Medication.form.coding
Definition

A reference to a code defined by a terminology system.

ShortCode defined by a terminology system
Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

Control10..*
TypeCoding
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. Medication.form.coding.extension
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Short✕ This element is not supportedAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Medication.form.coding.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
54. Medication.form.coding.system
Definition

The identification of the code system that defines the meaning of the symbol in the code.

ShortIdentity of the terminology system
Comments

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

Control10..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to be unambiguous about the source of the definition of the symbol.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
56. Medication.form.coding.version
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.


The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

Short✕ This element is not supportedVersion of the system - if relevant
Comments

Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

NoteThis is a business versionId, not a resource version id (see discussion)
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
58. Medication.form.coding.code
Definition

A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

ShortSymbol in syntax defined by the system
Control10..1
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to refer to a particular code in the system.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
60. Medication.form.coding.userSelected
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.


Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

Short✕ This element is not supportedIf this coding was chosen directly by the user
Comments

Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

Control0..1
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
62. Medication.form.text
Definition

A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

ShortPlain text representation of the concept
Comments

Very often the text is the same as a displayName of one of the codings.

Control10..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
64. Medication.amount
Definition

A relationship of two Quantity values - expressed as a numerator and a denominator.


Specific amount of the drug in the packaged product. For example, when specifying a product that has the same strength (For example, Insulin glargine 100 unit per mL solution for injection), this attribute provides additional clarification of the package amount (For example, 3 mL, 10mL, etc.).

ShortPackage sizeAmount of drug in package
Comments

The Ratio datatype should only be used to express a relationship of two numbers if the relationship cannot be suitably expressed using a Quantity and a common unit. Where the denominator value is known to be fixed to "1", Quantity should be used instead of Ratio.

Control10..1
This element is affected by the following invariants: ele-1
TypeRatio(CH EMED Ratio with Units)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
rat-1: Numerator and denominator SHALL both be present, or both are absent. If both are absent, there SHALL be some extension present ((numerator.empty() xor denominator.exists()) and (numerator.exists() or extension.exists()))
66. Medication.ingredient
Definition

Identifies a particular constituent of interest in the product.

ShortIngredients SHOULD be specified. See also treatment guidance page.Active or inactive ingredient
Comments

The ingredients need not be a complete list. If an ingredient is not specified, this does not indicate whether an ingredient is present or absent. If an ingredient is specified it does not mean that all ingredients are specified. It is possible to specify both inactive and active ingredients.

Control0..*
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
68. Medication.ingredient.id
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.


Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short✕ This element is not supportedUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
70. Medication.ingredient.extension
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Short✕ This element is not supportedAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
72. Medication.ingredient.modifierExtension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensionExtensions that cannot be ignored even if unrecognized
Comments

All modifiers SHALL be documented in the profile, in order to be usable.


There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
74. Medication.ingredient.item[x]
Definition

The actual ingredient - either a substance (simple ingredient) or another medication of a medication.

ShortThe actual ingredient or content
Control1..1
TypeCodeableConcept, Reference(Substance, Medication)
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Summaryfalse
Requirements

The ingredient may reference a substance (for example, amoxicillin) or another medication (for example in the case of a compounded product, Glaxal Base).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Medication.ingredient.item[x]. The slices are unordered and Closed, and can be differentiated using the following discriminators:
  • type @ $this
76. Medication.ingredient.item[x]:itemCodeableConcept
Slice NameitemCodeableConcept
Definition

The actual ingredient - either a substance (simple ingredient) or another medication of a medication.

ShortThe actual ingredient or content
Control01..1
TypeCodeableConcept, Reference(Substance, Medication)
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Summaryfalse
Requirements

The ingredient may reference a substance (for example, amoxicillin) or another medication (for example in the case of a compounded product, Glaxal Base).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
78. Medication.ingredient.item[x]:itemCodeableConcept.id
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.


Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

Short✕ This element is not supportedUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
80. Medication.ingredient.item[x]:itemCodeableConcept.extension
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Short✕ This element is not supportedAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Medication.ingredient.item[x].extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
82. Medication.ingredient.item[x]:itemCodeableConcept.text
Definition

A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

ShortIngredient namePlain text representation of the concept
Comments

Very often the text is the same as a displayName of one of the codings.

Control10..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
84. Medication.ingredient.strength
Definition

A relationship of two Quantity values - expressed as a numerator and a denominator.


Specifies how many (or how much) of the items there are in this Medication. For example, 250 mg per tablet. This is expressed as a ratio where the numerator is 250mg and the denominator is 1 tablet.

ShortDose per unitQuantity of ingredient present
Comments

The Ratio datatype should only be used to express a relationship of two numbers if the relationship cannot be suitably expressed using a Quantity and a common unit. Where the denominator value is known to be fixed to "1", Quantity should be used instead of Ratio.

Control0..1
This element is affected by the following invariants: ele-1
TypeRatio(CH EMED Ratio with Units)
Is Modifierfalse
Must Supporttrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
rat-1: Numerator and denominator SHALL both be present, or both are absent. If both are absent, there SHALL be some extension present ((numerator.empty() xor denominator.exists()) and (numerator.exists() or extension.exists()))

Guidance on how to interpret the contents of this table can be found here

0. Medication
Definition

This resource is primarily used for the identification and definition of a medication for the purposes of prescribing, dispensing, and administering a medication as well as for making statements about medication use.

ShortCH EMED Medication (MedicationDispense)
Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
ch-emed-med-1: Medication or ingredient name has to be specified (code.text.exists() or ingredient.item.text.exists())
2. Medication.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

ShortLogical id of this artifact
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control0..1
Typeid
Is Modifierfalse
Summarytrue
4. Medication.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

ShortMetadata about the resource
Control0..1
TypeMeta
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Medication.meta.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
8. Medication.meta.extension
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Medication.meta.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
10. Medication.meta.versionId
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Comments

The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes.

Control0..1
Typeid
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Medication.meta.lastUpdated
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Comments

This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a read interaction.

Control0..1
Typeinstant
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. Medication.meta.source
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Comments

In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used.

This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL.

Control0..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. Medication.meta.profile
Definition

A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url.

ShortProfiles this resource claims to conform to
Comments

It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set.

Control0..*
Typecanonical(StructureDefinition)
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. Medication.meta.security
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Comments

The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored.

Control0..*
BindingUnless not suitable, these codes SHALL be taken from All Security Labels
(extensible to http://hl7.org/fhir/ValueSet/security-labels
TypeCoding
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Medication.meta.tag
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Comments

The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.

Control0..*
BindingFor example codes, see CommonTags
(example to http://hl7.org/fhir/ValueSet/common-tags
TypeCoding
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. Medication.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. All modifiers SHALL be documented in the profile, in order to be usable.

Control0..0
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. Medication.language
Definition

The base language in which the resource is written.

ShortLanguage of the resource content
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control0..1
BindingThe codes SHOULD be taken from CommonLanguages
(preferred to http://hl7.org/fhir/ValueSet/languages
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Medication.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

ShortText summary of the resource, for human interpretation
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Control0..1
TypeNarrative
Is Modifierfalse
Summaryfalse
Alternate Namesnarrative, html, xhtml, display
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. Medication.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

Control0..*
TypeResource
Is Modifierfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
30. Medication.extension
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
32. Medication.modifierExtension
Definition

An Extension

ShortExtension
Comments

All modifiers SHALL be documented in the profile, in order to be usable.

Control0..0
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
34. Medication.identifier
Definition

Business identifier for this medication.

ShortBusiness identifier for this medication
Comments

The serial number could be included as an identifier.

NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. Medication.code
Definition

A code (or set of codes) that specify this medication, or a textual description if no code is available. Usage note: This could be a standard medication code such as a code from RxNorm, SNOMED CT, IDMP etc. It could also be a national or local formulary code, optionally with translations to other code systems.

ShortCodes that identify this medication. GTIN or ATC code SHOULD be specified. See also treatment guidance page.
Comments

Depending on the context of use, the code that was actually selected by the user (prescriber, dispenser, etc.) will have the coding.userSelected set to true. As described in the coding datatype: "A coding may be marked as a "userSelected" if a user selected the particular coded value in a user interface (e.g. the user selects an item in a pick-list). If a user selected coding exists, it is the preferred choice for performing translations etc. Other codes can only be literal translations to alternative code systems, or codes at a lower level of granularity (e.g. a generic code for a vendor-specific primary one).

Control1..1
BindingFor example codes, see SNOMEDCTMedicationCodes
(example to http://hl7.org/fhir/ValueSet/medication-codes
TypeCodeableConcept
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. Medication.code.id
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
40. Medication.code.extension
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Medication.code.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
42. Medication.code.coding
Definition

A reference to a code defined by a terminology system.

ShortCode of the medication
Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

Control0..*
TypeCoding
Is Modifierfalse
Summarytrue
Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Medication.code.coding. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ system
44. Medication.code.coding:GTIN
Slice NameGTIN
Definition

A reference to a code defined by a terminology system.

ShortUse GTIN for Swiss products
Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

Control0..1
TypeCoding
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. Medication.code.coding:GTIN.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
48. Medication.code.coding:GTIN.extension
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Medication.code.coding.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
50. Medication.code.coding:GTIN.system
Definition

The identification of the code system that defines the meaning of the symbol in the code.

ShortGlobal Trade Item Number (GS1)
Comments

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

Control1..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to be unambiguous about the source of the definition of the symbol.

Fixed Valueurn:oid:2.51.1.1
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. Medication.code.coding:GTIN.version
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Comments

Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

NoteThis is a business versionId, not a resource version id (see discussion)
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
54. Medication.code.coding:GTIN.code
Definition

A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

ShortSymbol in syntax defined by the system
Control1..1
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to refer to a particular code in the system.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
56. Medication.code.coding:GTIN.display
Definition

A representation of the meaning of the code in the system, following the rules of the system.

ShortRepresentation defined by the system
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
58. Medication.code.coding:GTIN.userSelected
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Comments

Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

Control0..1
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
60. Medication.code.coding:ATC
Slice NameATC
Definition

A reference to a code defined by a terminology system.

ShortUse ATC for foreign products
Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

Control0..1
TypeCoding
Is Modifierfalse
Summarytrue
Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
62. Medication.code.coding:ATC.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
64. Medication.code.coding:ATC.extension
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Medication.code.coding.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
66. Medication.code.coding:ATC.system
Definition

The identification of the code system that defines the meaning of the symbol in the code.

ShortAnatomical Therapeutic Chemical (ATC) Classification
Comments

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

Control1..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to be unambiguous about the source of the definition of the symbol.

Fixed Valuehttp://www.whocc.no/atc
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
68. Medication.code.coding:ATC.version
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Comments

Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

NoteThis is a business versionId, not a resource version id (see discussion)
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
70. Medication.code.coding:ATC.code
Definition

A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

ShortSymbol in syntax defined by the system
Control1..1
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to refer to a particular code in the system.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
72. Medication.code.coding:ATC.display
Definition

A representation of the meaning of the code in the system, following the rules of the system.

ShortRepresentation defined by the system
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
74. Medication.code.coding:ATC.userSelected
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Comments

Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

Control0..1
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
76. Medication.code.text
Definition

A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

ShortMedication name
Comments

Very often the text is the same as a displayName of one of the codings.

Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
78. Medication.status
Definition

A code to indicate if the medication is in active use.

Shortactive | inactive | entered-in-error
Comments

This status is intended to identify if the medication in a local system is in active use within a drug database or inventory. For example, a pharmacy system may create a new drug file record for a compounded product "ABC Hospital Special Cream" with an active status. At some point in the future, it may be determined that the drug record was created with an error and the status is changed to "entered in error". This status is not intended to specify if a medication is part of a particular formulary. It is possible that the drug record may be referenced by multiple formularies or catalogues and each of those entries would have a separate status.

Control0..1
BindingThe codes SHALL be taken from Medication Status Codes
(required to http://hl7.org/fhir/ValueSet/medication-status|4.0.1
Typecode
Is Modifiertrue because This element changes the interpretation of all descriptive attributes.
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Pattern Valueactive
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
80. Medication.manufacturer
Definition

Describes the details of the manufacturer of the medication product. This is not intended to represent the distributor of a medication product.

ShortManufacturer of the item
Control0..1
TypeReference(CH EMED EPR Organization)
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
82. Medication.form
Definition

Describes the form of the item. Powder; tablets; capsule.

ShortGalenic form
Comments

When Medication is referenced from MedicationRequest, this is the ordered form. When Medication is referenced within MedicationDispense, this is the dispensed form. When Medication is referenced within MedicationAdministration, this is administered form.

Control0..1
BindingThe codes SHALL be taken from EDQM - Pharmaceutical Dose Form
(required to http://fhir.ch/ig/ch-emed/ValueSet/edqm-pharmaceuticaldoseform
TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
84. Medication.form.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
86. Medication.form.extension
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Medication.form.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
88. Medication.form.coding
Definition

A reference to a code defined by a terminology system.

ShortCode defined by a terminology system
Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

Control1..*
TypeCoding
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
90. Medication.form.coding.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
92. Medication.form.coding.extension
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Medication.form.coding.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
94. Medication.form.coding.system
Definition

The identification of the code system that defines the meaning of the symbol in the code.

ShortIdentity of the terminology system
Comments

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

Control1..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to be unambiguous about the source of the definition of the symbol.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
96. Medication.form.coding.version
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Comments

Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

NoteThis is a business versionId, not a resource version id (see discussion)
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
98. Medication.form.coding.code
Definition

A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

ShortSymbol in syntax defined by the system
Control1..1
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to refer to a particular code in the system.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
100. Medication.form.coding.display
Definition

A representation of the meaning of the code in the system, following the rules of the system.

ShortRepresentation defined by the system
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
102. Medication.form.coding.userSelected
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Comments

Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

Control0..1
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
104. Medication.form.text
Definition

A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

ShortPlain text representation of the concept
Comments

Very often the text is the same as a displayName of one of the codings.

Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
106. Medication.amount
Definition

A relationship of two Quantity values - expressed as a numerator and a denominator.

ShortPackage size
Comments

The Ratio datatype should only be used to express a relationship of two numbers if the relationship cannot be suitably expressed using a Quantity and a common unit. Where the denominator value is known to be fixed to "1", Quantity should be used instead of Ratio.

Control1..1
This element is affected by the following invariants: ele-1
TypeRatio(CH EMED Ratio with Units)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
rat-1: Numerator and denominator SHALL both be present, or both are absent. If both are absent, there SHALL be some extension present ((numerator.empty() xor denominator.exists()) and (numerator.exists() or extension.exists()))
108. Medication.ingredient
Definition

Identifies a particular constituent of interest in the product.

ShortIngredients SHOULD be specified. See also treatment guidance page.
Comments

The ingredients need not be a complete list. If an ingredient is not specified, this does not indicate whether an ingredient is present or absent. If an ingredient is specified it does not mean that all ingredients are specified. It is possible to specify both inactive and active ingredients.

Control0..*
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
110. Medication.ingredient.id
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
112. Medication.ingredient.extension
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
114. Medication.ingredient.modifierExtension
Definition

An Extension

ShortExtension
Comments

All modifiers SHALL be documented in the profile, in order to be usable.

Control0..0
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
116. Medication.ingredient.item[x]
Definition

The actual ingredient - either a substance (simple ingredient) or another medication of a medication.

ShortThe actual ingredient or content
Control1..1
TypeCodeableConcept
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Summaryfalse
Requirements

The ingredient may reference a substance (for example, amoxicillin) or another medication (for example in the case of a compounded product, Glaxal Base).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Medication.ingredient.item[x]. The slices are unordered and Closed, and can be differentiated using the following discriminators:
  • type @ $this
118. Medication.ingredient.item[x]:itemCodeableConcept
Slice NameitemCodeableConcept
Definition

The actual ingredient - either a substance (simple ingredient) or another medication of a medication.

ShortThe actual ingredient or content
Control0..1
TypeCodeableConcept
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Summaryfalse
Requirements

The ingredient may reference a substance (for example, amoxicillin) or another medication (for example in the case of a compounded product, Glaxal Base).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
120. Medication.ingredient.item[x]:itemCodeableConcept.id
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
122. Medication.ingredient.item[x]:itemCodeableConcept.extension
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Medication.ingredient.item[x].extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
124. Medication.ingredient.item[x]:itemCodeableConcept.coding
Definition

A reference to a code defined by a terminology system.

ShortIngredients coded with SNOMED CT
Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

Control0..*
BindingUnless not suitable, these codes SHALL be taken from ActivePharmaceuticalIngredient
(extensible to http://fhir.ch/ig/ch-emed/ValueSet/ActivePharmaceuticalIngredient
TypeCoding
Is Modifierfalse
Summarytrue
Requirements

Allows for alternative encodings within a code system, and translations to other code systems.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
126. Medication.ingredient.item[x]:itemCodeableConcept.text
Definition

A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

ShortIngredient name
Comments

Very often the text is the same as a displayName of one of the codings.

Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
128. Medication.ingredient.isActive
Definition

Indication of whether this ingredient affects the therapeutic action of the drug.

ShortActive ingredient indicator
Control0..1
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

True indicates that the ingredient affects the therapeutic action of the drug (i.e. active). False indicates that the ingredient does not affect the therapeutic action of the drug (i.e. inactive).

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
130. Medication.ingredient.strength
Definition

A relationship of two Quantity values - expressed as a numerator and a denominator.

ShortDose per unit
Comments

The Ratio datatype should only be used to express a relationship of two numbers if the relationship cannot be suitably expressed using a Quantity and a common unit. Where the denominator value is known to be fixed to "1", Quantity should be used instead of Ratio.

Control0..1
This element is affected by the following invariants: ele-1
TypeRatio(CH EMED Ratio with Units)
Is Modifierfalse
Must Supporttrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
rat-1: Numerator and denominator SHALL both be present, or both are absent. If both are absent, there SHALL be some extension present ((numerator.empty() xor denominator.exists()) and (numerator.exists() or extension.exists()))
132. Medication.batch
Definition

Information that only applies to packages (not products).

ShortDetails about packaged medications
Control0..1
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
134. Medication.batch.id
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
136. Medication.batch.extension
Definition

Implementers should not set or read this element. This element is only kept as optional to allow submission of documents that would contain a value, since those documents are still readable by others. The meaning of this element is undefined in this profile.

Short✕ This element is not supported
Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
138. Medication.batch.modifierExtension
Definition

An Extension

ShortExtension
Comments

All modifiers SHALL be documented in the profile, in order to be usable.

Control0..0
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
140. Medication.batch.lotNumber
Definition

The assigned lot number of a batch of the specified product.

ShortIdentifier assigned to batch
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
142. Medication.batch.expirationDate
Definition

When this specific batch of product will expire.

ShortWhen batch will expire
Control0..1
TypedateTime
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))