CH ELM (R4)
1.5.0 - release
This page is part of the Observations of notifiable communicable infectious diseases (v1.5.0: Release) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions
Active as of 2024-09-24 |
Definitions for the ch-elm-specimen resource profile.
Guidance on how to interpret the contents of this table can be found here
0. Specimen | |
Short | CH Lab Specimen: Laboratory |
Impose Profile | This profile also requires that the instance also conform this additional profile: |
2. Specimen.type | |
Short | The mechanism to declare the collection material is described under 'Guidance - Laboratory Result' |
4. Specimen.type.coding | |
Control | 0..1 |
Binding | The codes SHALL be taken from CH ELM Results Complete Spec (required to http://fhir.ch/ig/ch-elm/ValueSet/ch-elm-results-complete-spec ) |
Type | Coding(CH ELM Coding) |
6. Specimen.type.text | |
Pattern Value | Material declared by Observation.code or non-mandatory |
8. Specimen.subject | |
Control | 1..? |
Type | Reference(CH ELM Patient) |
10. Specimen.collection | |
Must Support | true |
12. Specimen.collection.collected[x] | |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Slicing | This element introduces a set of slices on Specimen.collection.collected[x] . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
14. Specimen.collection.collected[x]:collectedDateTime | |
Slice Name | collectedDateTime |
Control | 0..1 |
Type | dateTime |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Invariants | ch-elm-dateTime: At least the format YYYY-MM-DD is required. ($this.toString().length() >= 10 ) |
Guidance on how to interpret the contents of this table can be found here
0. Specimen | |
Definition | Laboratory specimen A sample to be used for analysis. |
Short | CH Lab Specimen: LaboratorySample for analysis |
Control | 0..* |
Is Modifier | false |
Impose Profile | This profile also requires that the instance also conform this additional profile: |
Summary | false |
Invariants | dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty()) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()) dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty()) dom-6: A resource should have narrative for robust management (text.`div`.exists()) |
2. Specimen.implicitRules | |
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. |
Short | A set of rules under which this content was created |
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. |
Control | 0..1 |
Type | uri |
Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
4. Specimen.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them |
Summary | false |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
6. Specimen.status | |
Definition | The availability of the specimen. |
Short | available | unavailable | unsatisfactory | entered-in-error |
Comments | This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid. |
Control | 0..1 |
Binding | The codes SHALL be taken from SpecimenStatushttp://hl7.org/fhir/ValueSet/specimen-status|4.0.1 (required to http://hl7.org/fhir/ValueSet/specimen-status|4.0.1 )Codes providing the status/availability of a specimen. |
Type | code |
Is Modifier | true because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
8. Specimen.type | |
Definition | The kind of material that forms the specimen. |
Short | The mechanism to declare the collection material is described under 'Guidance - Laboratory Result'Kind of material that forms the specimen |
Comments | If the specimen.type conveys information about the site the specimen has been collected from, then, if the bodySite is present it shall be coherent with the type. The type can change the way that a specimen is handled and drives what kind of analyses can properly be performed on the specimen. It is frequently used in diagnostic work flow decision making systems. |
Control | 10..1 |
Binding | The codes SHOULD be taken from For example codes, see Specimen Typeshttp://terminology.hl7.org/ValueSet/v2-0487 (preferred to http://hl7.eu/fhir/laboratory/ValueSet/lab-specimenType-eu-lab ) |
Type | CodeableConcept |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
10. Specimen.type.coding | |
Definition | A reference to a code defined by a terminology system. |
Short | A reference to a code defined by a terminology systemCode defined by a terminology system |
Comments | Codes may be defined very casually in enumerations or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. |
Control | 0..1* This element is affected by the following invariants: ele-1 |
Binding | The codes SHALL be taken from For codes, see CH ELM Results Complete Spec (required to http://fhir.ch/ig/ch-elm/ValueSet/ch-elm-results-complete-spec ) |
Type | Coding(CH ELM Coding) |
Is Modifier | false |
Requirements | Allows for alternative encodings within a code system, and translations to other code systems. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
12. Specimen.type.text | |
Definition | A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. |
Short | Plain text representation of the concept |
Comments | Very often the text is the same as a displayName of one of the codings. |
Control | 0..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. |
Pattern Value | Material declared by Observation.code or non-mandatory |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
14. Specimen.subject | |
Definition | Where the specimen came from. This may be from patient(s), from a location (e.g., the source of an environmental sample), or a sampling of a substance or a device. |
Short | Where the specimen came from. This may be from patient(s), from a location (e.g., the source of an environmental sample), or a sampling of a substance or a device |
Control | 10..1 |
Type | Reference(CH ELM Patient, Patient, Group, Device, Substance, Location) |
Is Modifier | false |
Summary | true |
Requirements | Must know the subject context. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
16. Specimen.collection | |
Definition | Details concerning the specimen collection. |
Short | Collection details |
Control | 0..1 |
Type | BackboneElement |
Is Modifier | false |
Must Support | true |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
18. Specimen.collection.extension:bodySite | |
Slice Name | bodySite |
Definition | Record details about the anatomical location of a specimen or body part. This resource may be used when a coded concept does not provide the necessary detail needed for the use case. |
Short | Target anatomic location or structure |
Control | 0..1 |
Type | Extension(BodyStructure Reference) (Extension Type: Reference(BodyStructure)) |
Is Modifier | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() )ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
20. Specimen.collection.extension:bodySite.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..0* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() )ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on Specimen.collection.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
22. Specimen.collection.extension:bodySite.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Fixed Value | http://hl7.org/fhir/StructureDefinition/bodySite |
24. Specimen.collection.extension:bodySite.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 10..1 This element is affected by the following invariants: ext-1 |
Type | Reference(Body structure: Laboratory), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
26. Specimen.collection.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
28. Specimen.collection.collected[x] | |
Definition | Time when specimen was collected from subject - the physiologically relevant time. |
Short | Collection time |
Control | 0..1 |
Type | Choice of: dateTime, Period |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Slicing | This element introduces a set of slices on Specimen.collection.collected[x] . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
30. Specimen.collection.collected[x]:collectedDateTime | |
Slice Name | collectedDateTime |
Definition | Time when specimen was collected from subject - the physiologically relevant time. |
Short | Collection time |
Control | 0..1 |
Type | dateTime, Period |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ch-elm-dateTime: At least the format YYYY-MM-DD is required. ( $this.toString().length() >= 10 ) |
Guidance on how to interpret the contents of this table can be found here
0. Specimen | |||||
Definition | Laboratory specimen | ||||
Short | CH Lab Specimen: Laboratory | ||||
Control | 0..* | ||||
Is Modifier | false | ||||
Impose Profile | This profile also requires that the instance also conform this additional profile: | ||||
Summary | false | ||||
Invariants | dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty() )dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource ( contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty() )dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated ( contained.meta.versionId.empty() and contained.meta.lastUpdated.empty() )dom-5: If a resource is contained in another resource, it SHALL NOT have a security label ( contained.meta.security.empty() )dom-6: A resource should have narrative for robust management ( text.`div`.exists() ) | ||||
2. Specimen.id | |||||
Definition | The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. | ||||
Short | Logical id of this artifact | ||||
Comments | The only time that a resource does not have an id is when it is being submitted to the server using a create operation. | ||||
Control | 0..1 | ||||
Type | id | ||||
Is Modifier | false | ||||
Summary | true | ||||
4. Specimen.meta | |||||
Definition | The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. | ||||
Short | Metadata about the resource | ||||
Control | 0..1 | ||||
Type | Meta | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
6. Specimen.implicitRules | |||||
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. | ||||
Short | A set of rules under which this content was created | ||||
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. | ||||
Control | 0..1 | ||||
Type | uri | ||||
Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
8. Specimen.language | |||||
Definition | The base language in which the resource is written. | ||||
Short | Language of the resource content | ||||
Comments | Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). | ||||
Control | 0..1 | ||||
Binding | The codes SHOULD be taken from CommonLanguages (preferred to http://hl7.org/fhir/ValueSet/languages )A human language.
| ||||
Type | code | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
10. Specimen.text | |||||
Definition | A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. | ||||
Short | Text summary of the resource, for human interpretation | ||||
Comments | Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. | ||||
Control | 0..1 | ||||
Type | Narrative | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | narrative, html, xhtml, display | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
12. Specimen.contained | |||||
Definition | These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. | ||||
Short | Contained, inline Resources | ||||
Comments | This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. | ||||
Control | 0..* | ||||
Type | Resource | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | inline resources, anonymous resources, contained resources | ||||
14. Specimen.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
16. Specimen.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them | ||||
Summary | false | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
18. Specimen.identifier | |||||
Definition | Id for specimen. | ||||
Short | External Identifier | ||||
Note | This is a business identifier, not a resource identifier (see discussion) | ||||
Control | 0..* | ||||
Type | Identifier | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
20. Specimen.accessionIdentifier | |||||
Definition | The identifier assigned by the lab when accessioning specimen(s). This is not necessarily the same as the specimen identifier, depending on local lab procedures. | ||||
Short | Identifier assigned by the lab | ||||
Control | 0..1 | ||||
Type | Identifier | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
22. Specimen.status | |||||
Definition | The availability of the specimen. | ||||
Short | available | unavailable | unsatisfactory | entered-in-error | ||||
Comments | This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid. | ||||
Control | 0..1 | ||||
Binding | The codes SHALL be taken from SpecimenStatus (required to http://hl7.org/fhir/ValueSet/specimen-status|4.0.1 )Codes providing the status/availability of a specimen. | ||||
Type | code | ||||
Is Modifier | true because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
24. Specimen.type | |||||
Definition | The kind of material that forms the specimen. | ||||
Short | The mechanism to declare the collection material is described under 'Guidance - Laboratory Result' | ||||
Comments | If the specimen.type conveys information about the site the specimen has been collected from, then, if the bodySite is present it shall be coherent with the type. | ||||
Control | 1..1 | ||||
Binding | The codes SHOULD be taken from Specimen Types (preferred to http://hl7.eu/fhir/laboratory/ValueSet/lab-specimenType-eu-lab ) | ||||
Type | CodeableConcept | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
26. Specimen.type.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
28. Specimen.type.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on Specimen.type.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
30. Specimen.type.coding | |||||
Definition | A reference to a code defined by a terminology system. | ||||
Short | A reference to a code defined by a terminology system | ||||
Comments | Codes may be defined very casually in enumerations or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Binding | The codes SHALL be taken from CH ELM Results Complete Spec (required to http://fhir.ch/ig/ch-elm/ValueSet/ch-elm-results-complete-spec ) | ||||
Type | Coding(CH ELM Coding) | ||||
Is Modifier | false | ||||
Requirements | Allows for alternative encodings within a code system, and translations to other code systems. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
32. Specimen.type.text | |||||
Definition | A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. | ||||
Short | Plain text representation of the concept | ||||
Comments | Very often the text is the same as a displayName of one of the codings. | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. | ||||
Pattern Value | Material declared by Observation.code or non-mandatory | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
34. Specimen.subject | |||||
Definition | Where the specimen came from. This may be from patient(s), from a location (e.g., the source of an environmental sample), or a sampling of a substance or a device. | ||||
Short | Where the specimen came from. This may be from patient(s), from a location (e.g., the source of an environmental sample), or a sampling of a substance or a device | ||||
Control | 1..1 | ||||
Type | Reference(CH ELM Patient) | ||||
Is Modifier | false | ||||
Summary | true | ||||
Requirements | Must know the subject context. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
36. Specimen.receivedTime | |||||
Definition | Time when specimen was received for processing or testing. | ||||
Short | The time when specimen was received for processing | ||||
Control | 0..1 | ||||
Type | dateTime | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
38. Specimen.parent | |||||
Definition | Reference to the parent (source) specimen which is used when the specimen was either derived from or a component of another specimen. | ||||
Short | Specimen from which this specimen originated | ||||
Comments | The parent specimen could be the source from which the current specimen is derived by some processing step (e.g. an aliquot or isolate or extracted nucleic acids from clinical samples) or one of many specimens that were combined to create a pooled sample. | ||||
Control | 0..* | ||||
Type | Reference(CH LAB Specimen) | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
40. Specimen.request | |||||
Definition | Details concerning a service request that required a specimen to be collected. | ||||
Short | Why the specimen was collected. | ||||
Comments | If the specimen information are known when the order is created then the ServiceRequest.specimen should be used. If the ServiceRequest can be updated when the specimen is collected then the ServiceRequest.specimen or the Specimen.request could be used. Otherwise the relationship is recorded in the Specimen.request element | ||||
Control | 0..* | ||||
Type | Reference(ServiceRequest) | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
42. Specimen.collection | |||||
Definition | Details concerning the specimen collection. | ||||
Short | Collection details | ||||
Control | 0..1 | ||||
Type | BackboneElement | ||||
Is Modifier | false | ||||
Must Support | true | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
44. Specimen.collection.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
46. Specimen.collection.extension | |||||
Definition | An Extension | ||||
Short | Extension | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on Specimen.collection.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
48. Specimen.collection.extension:bodySite | |||||
Slice Name | bodySite | ||||
Definition | Record details about the anatomical location of a specimen or body part. This resource may be used when a coded concept does not provide the necessary detail needed for the use case. | ||||
Short | Target anatomic location or structure | ||||
Control | 0..1 | ||||
Type | Extension(BodyStructure Reference) (Extension Type: Reference(BodyStructure)) | ||||
Is Modifier | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
50. Specimen.collection.extension:bodySite.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | id | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
52. Specimen.collection.extension:bodySite.extension | |||||
Definition | An Extension | ||||
Short | Extension | ||||
Control | 0..0 | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on Specimen.collection.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
54. Specimen.collection.extension:bodySite.url | |||||
Definition | Source of the definition for the extension code - a logical name or a URL. | ||||
Short | identifies the meaning of the extension | ||||
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. | ||||
Control | 1..1 | ||||
Type | uri | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
Fixed Value | http://hl7.org/fhir/StructureDefinition/bodySite | ||||
56. Specimen.collection.extension:bodySite.value[x] | |||||
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). | ||||
Short | Value of extension | ||||
Control | 1..1 This element is affected by the following invariants: ext-1 | ||||
Type | Reference(Body structure: Laboratory) | ||||
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
58. Specimen.collection.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored even if unrecognized | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
60. Specimen.collection.collector | |||||
Definition | Person who collected the specimen. | ||||
Short | Who collected the specimen | ||||
Control | 0..1 | ||||
Type | Reference(Practitioner, PractitionerRole) | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
62. Specimen.collection.collected[x] | |||||
Definition | Time when specimen was collected from subject - the physiologically relevant time. | ||||
Short | Collection time | ||||
Control | 0..1 | ||||
Type | Choice of: dateTime, Period | ||||
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
Slicing | This element introduces a set of slices on Specimen.collection.collected[x] . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
64. Specimen.collection.collected[x]:collectedDateTime | |||||
Slice Name | collectedDateTime | ||||
Definition | Time when specimen was collected from subject - the physiologically relevant time. | ||||
Short | Collection time | ||||
Control | 0..1 | ||||
Type | dateTime | ||||
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ch-elm-dateTime: At least the format YYYY-MM-DD is required. ( $this.toString().length() >= 10 ) | ||||
66. Specimen.collection.duration | |||||
Definition | The span of time over which the collection of a specimen occurred. | ||||
Short | How long it took to collect specimen | ||||
Control | 0..1 | ||||
Type | Duration | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
68. Specimen.collection.quantity | |||||
Definition | The quantity of specimen collected; for instance the volume of a blood sample, or the physical measurement of an anatomic pathology sample. | ||||
Short | The quantity of specimen collected | ||||
Control | 0..1 | ||||
Type | Quantity(SimpleQuantity) | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
70. Specimen.collection.method | |||||
Definition | A coded value specifying the technique that is used to perform the procedure. | ||||
Short | Technique used to perform collection | ||||
Control | 0..1 | ||||
Binding | For example codes, see FHIRSpecimenCollectionMethod (example to http://hl7.org/fhir/ValueSet/specimen-collection-method )The technique that is used to perform the procedure. | ||||
Type | CodeableConcept | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
72. Specimen.collection.bodySite | |||||
Definition | Anatomical location from which the specimen was collected (if subject is a patient). This is the target site. This element is not used for environmental specimens. | ||||
Short | Anatomical collection site | ||||
Comments | If the specimen.type conveys information about the site the specimen has been collected from, then, if the bodySite if present it shall be coherent with the type | ||||
Control | 0..1 | ||||
Binding | The codes SHOULD be taken from SNOMEDCTBodyStructures (preferred to http://hl7.org/fhir/ValueSet/body-site ) | ||||
Type | CodeableConcept | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
74. Specimen.collection.fastingStatus[x] | |||||
Definition | Abstinence or reduction from some or all food, drink, or both, for a period of time prior to sample collection. | ||||
Short | Whether or how long patient abstained from food and/or drink | ||||
Comments | Representing fasting status using this element is preferred to representing it with an observation using a 'pre-coordinated code' such as LOINC 2005-7 (Calcium [Moles/time] in 2 hour Urine --12 hours fasting), or using a component observation | ||||
Control | 0..1 | ||||
Binding | Unless not suitable, these codes SHALL be taken from hl7VS-relevantClincialInformation (extensible to http://terminology.hl7.org/ValueSet/v2-0916 )Codes describing the fasting status of the patient. | ||||
Type | Choice of: CodeableConcept, Duration | ||||
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
Is Modifier | false | ||||
Summary | true | ||||
Requirements | Many diagnostic tests require fasting to facilitate accurate interpretation. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
76. Specimen.processing | |||||
Definition | Details concerning processing and processing steps for the specimen. | ||||
Short | Processing and processing step details | ||||
Control | 0..* | ||||
Type | BackboneElement | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
78. Specimen.processing.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
80. Specimen.processing.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
82. Specimen.processing.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored even if unrecognized | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
84. Specimen.processing.description | |||||
Definition | Textual description of procedure. | ||||
Short | Textual description of procedure | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
86. Specimen.processing.procedure | |||||
Definition | A coded value specifying the procedure used to process the specimen. | ||||
Short | Indicates the treatment step applied to the specimen | ||||
Control | 0..1 | ||||
Binding | For example codes, see SpecimenProcessingProcedure (example to http://hl7.org/fhir/ValueSet/specimen-processing-procedure )Type indicating the technique used to process the specimen. | ||||
Type | CodeableConcept | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
88. Specimen.processing.additive | |||||
Definition | Material used in the processing step. | ||||
Short | Material used in the processing step | ||||
Control | 0..* | ||||
Type | Reference(Substance, Substance: Specimen Additive Substance) | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
90. Specimen.processing.time[x] | |||||
Definition | A record of the time or period when the specimen processing occurred. For example the time of sample fixation or the period of time the sample was in formalin. | ||||
Short | Date and time of specimen processing | ||||
Control | 0..1 | ||||
Type | Choice of: dateTime, Period | ||||
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
92. Specimen.container | |||||
Definition | The container holding the specimen. The recursive nature of containers; i.e. blood in tube in tray in rack is not addressed here. | ||||
Short | Direct container of specimen (tube/slide, etc.) | ||||
Control | 0..* | ||||
Type | BackboneElement | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
94. Specimen.container.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
96. Specimen.container.extension | |||||
Definition | An Extension | ||||
Short | Extension | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on Specimen.container.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
98. Specimen.container.extension:device | |||||
Slice Name | device | ||||
Definition | Optional Extension Element - found in all resources. | ||||
Short | Optional Extensions Element | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Extension(Extension Definition for Specimen.container.device for Version 5.0) (Extension Type: Reference(Device)) | ||||
Is Modifier | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
100. Specimen.container.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored even if unrecognized | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
102. Specimen.container.identifier | |||||
Definition | Id for container. There may be multiple; a manufacturer's bar code, lab assigned identifier, etc. The container ID may differ from the specimen id in some circumstances. | ||||
Short | Id for the container | ||||
Note | This is a business identifier, not a resource identifier (see discussion) | ||||
Control | 0..* | ||||
Type | Identifier | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
104. Specimen.container.description | |||||
Definition | Textual description of the container. | ||||
Short | Textual description of the container | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
106. Specimen.container.type | |||||
Definition | The type of container associated with the specimen (e.g. slide, aliquot, etc.). | ||||
Short | Kind of container directly associated with specimen | ||||
Control | 0..1 | ||||
Binding | The codes SHOULD be taken from Specimen Container (preferred to http://hl7.eu/fhir/laboratory/ValueSet/lab-specimenContainer-eu-lab ) | ||||
Type | CodeableConcept | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
108. Specimen.container.capacity | |||||
Definition | The capacity (volume or other measure) the container may contain. | ||||
Short | Container volume or size | ||||
Control | 0..1 | ||||
Type | Quantity(SimpleQuantity) | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
110. Specimen.container.specimenQuantity | |||||
Definition | The quantity of specimen in the container; may be volume, dimensions, or other appropriate measurements, depending on the specimen type. | ||||
Short | Quantity of specimen within container | ||||
Control | 0..1 | ||||
Type | Quantity(SimpleQuantity) | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
112. Specimen.container.additive[x] | |||||
Definition | Introduced substance to preserve, maintain or enhance the specimen. Examples: Formalin, Citrate, EDTA. | ||||
Short | Additive associated with container | ||||
Control | 0..0 | ||||
Binding | For example codes, see hl7VS-additivePreservative (example to http://terminology.hl7.org/ValueSet/v2-0371 )Substance added to specimen container. | ||||
Type | Choice of: CodeableConcept, Reference(Substance) | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
114. Specimen.condition | |||||
Definition | A mode or state of being that describes the nature of the specimen. | ||||
Short | State of the specimen | ||||
Comments | Specimen condition is an observation made about the specimen. It's a point-in-time assessment. It can be used to assess its quality or appropriateness for a specific test. | ||||
Control | 0..* | ||||
Binding | Unless not suitable, these codes SHALL be taken from hl7VS-specimenCondition (extensible to http://terminology.hl7.org/ValueSet/v2-0493 )Codes describing the state of the specimen. | ||||
Type | CodeableConcept | ||||
Is Modifier | false | ||||
Summary | true | ||||
Requirements | The specimen condition can be used to assess its quality or appropriateness for a specific test. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
116. Specimen.note | |||||
Definition | To communicate any details or issues about the specimen or during the specimen collection. (for example: broken vial, sent with patient, frozen). | ||||
Short | Comments | ||||
Control | 0..* | ||||
Type | Annotation | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |