CH Core (R4)
5.0.0-ballot - ballot Switzerland flag

This page is part of the CH Core (R4) (v5.0.0-ballot: STU 5 Ballot 1) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions

Resource Profile: CHCoreEPRConsent - Detailed Descriptions

Active as of 2024-05-16

Definitions for the ch-core-epr-consent resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Consent
ShortCH Core EPR-Consent
2. Consent.scope
Pattern Value{
  "coding" : [{
    "system" : "http://terminology.hl7.org/CodeSystem/consentscope",
    "code" : "patient-privacy"
  }]
}
4. Consent.category
SlicingThis element introduces a set of slices on Consent.category. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ coding.code
  • value @ coding.system
  • 6. Consent.category:VSCat
    Slice NameVSCat
    Control1..1
    8. Consent.category:VSCat.coding
    Control1..?
    10. Consent.category:VSCat.coding.system
    Control1..?
    Fixed Valuehttp://terminology.hl7.org/CodeSystem/v3-ActCode
    12. Consent.category:VSCat.coding.code
    Shortinformation disclosure
    Control1..?
    Fixed ValueIDSCL
    14. Consent.patient
    ShortThe patient to whom this EPR consent applies
    Control1..?
    TypeReference(CH Core Patient)
    16. Consent.performer
    TypeReference(CH Core Organization, CH Core Patient, CH Core Practitioner, RelatedPerson, CH Core PractitionerRole)
    18. Consent.organization
    TypeReference(CH Core Organization)
    20. Consent.policyRule
    Pattern Value{
      "coding" : [{
        "system" : "http://terminology.hl7.org/CodeSystem/consentpolicycodes",
        "code" : "ch-epr"
      }]
    }
    22. Consent.provision
    ShortExceptions to the EPR consent
    24. Consent.provision.type
    Definition

    Encounters can be added here where the consent for the EPR does not apply.

    Shortdeny
    Control1..?
    Fixed Valuedeny
    26. Consent.provision.data
    28. Consent.provision.data.meaning
    Fixed Valueinstance
    30. Consent.provision.data.reference
    Definition

    A reference to the encounter where the consent for the EPR does not apply.

    ShortExcluded encounter for EPR
    TypeReference(CH Core Encounter)

    Guidance on how to interpret the contents of this table can be found here

    0. Consent
    Definition

    A record of a healthcare consumer’s choices, which permits or denies identified recipient(s) or recipient role(s) to perform one or more actions within a given policy context, for specific purposes and periods of time.

    ShortCH Core EPR-ConsentA healthcare consumer's choices to permit or deny recipients or roles to perform actions for specific purposes and periods of time
    Comments

    Broadly, there are 3 key areas of consent for patients: Consent around sharing information (aka Privacy Consent Directive - Authorization to Collect, Use, or Disclose information), consent for specific treatment, or kinds of treatment, and general advance care directives.

    Control0..*
    Is Modifierfalse
    Summaryfalse
    Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
    dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
    dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
    dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
    dom-6: A resource should have narrative for robust management (text.`div`.exists())
    ppc-1: Either a Policy or PolicyRule (policy.exists() or policyRule.exists())
    ppc-2: IF Scope=privacy, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='patient-privacy').exists().not())
    ppc-3: IF Scope=research, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='research').exists().not())
    ppc-4: IF Scope=adr, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='adr').exists().not())
    ppc-5: IF Scope=treatment, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='treatment').exists().not())
    ppc-1: Either a Policy or PolicyRule (policy.exists() or policyRule.exists())
    ppc-2: IF Scope=privacy, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='patient-privacy').exists().not())
    ppc-3: IF Scope=research, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='research').exists().not())
    ppc-4: IF Scope=adr, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='adr').exists().not())
    ppc-5: IF Scope=treatment, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='treatment').exists().not())
    2. Consent.implicitRules
    Definition

    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

    ShortA set of rules under which this content was created
    Comments

    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

    Control0..1
    Typeuri
    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    4. Consent.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Summaryfalse
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    6. Consent.status
    Definition

    Indicates the current state of this consent.

    Shortdraft | proposed | active | rejected | inactive | entered-in-error
    Comments

    This element is labeled as a modifier because the status contains the codes rejected and entered-in-error that mark the Consent as not currently valid.

    Control1..1
    BindingThe codes SHALL be taken from ConsentStatehttp://hl7.org/fhir/ValueSet/consent-state-codes|4.0.1
    (required to http://hl7.org/fhir/ValueSet/consent-state-codes|4.0.1)

    Indicates the state of the consent.

    Typecode
    Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    The Consent Directive that is pointed to might be in various lifecycle states, e.g., a revoked Consent Directive.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    8. Consent.scope
    Definition

    A selector of the type of consent being presented: ADR, Privacy, Treatment, Research. This list is now extensible.

    ShortWhich of the four areas this resource covers (extensible)
    Control1..1
    BindingUnless not suitable, these codes SHALL be taken from ConsentScopeCodeshttp://hl7.org/fhir/ValueSet/consent-scope
    (extensible to http://hl7.org/fhir/ValueSet/consent-scope)

    The four anticipated uses for the Consent Resource.

    TypeCodeableConcept
    Is Modifiertrue because Allows changes to codes based on scope selection
    Summarytrue
    Pattern Value{
      "coding" : [{
        "system" : "http://terminology.hl7.org/CodeSystem/consentscope",
        "code" : "patient-privacy"
      }]
    }
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    10. Consent.category
    Definition

    A classification of the type of consents found in the statement. This element supports indexing and retrieval of consent statements.

    ShortClassification of the consent statement - for indexing/retrieval
    Control1..*
    BindingUnless not suitable, these codes SHALL be taken from ConsentCategoryCodeshttp://hl7.org/fhir/ValueSet/consent-category
    (extensible to http://hl7.org/fhir/ValueSet/consent-category)

    A classification of the type of consents found in a consent statement.

    TypeCodeableConcept
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    SlicingThis element introduces a set of slices on Consent.category. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ coding.code
    • value @ coding.system
    • 12. Consent.category:VSCat
      Slice NameVSCat
      Definition

      A classification of the type of consents found in the statement. This element supports indexing and retrieval of consent statements.

      ShortClassification of the consent statement - for indexing/retrieval
      Control1..1*
      BindingUnless not suitable, these codes SHALL be taken from ConsentCategoryCodeshttp://hl7.org/fhir/ValueSet/consent-category
      (extensible to http://hl7.org/fhir/ValueSet/consent-category)

      A classification of the type of consents found in a consent statement.

      TypeCodeableConcept
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      14. Consent.category:VSCat.coding
      Definition

      A reference to a code defined by a terminology system.

      ShortCode defined by a terminology system
      Comments

      Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

      Control10..*
      TypeCoding
      Is Modifierfalse
      Summarytrue
      Requirements

      Allows for alternative encodings within a code system, and translations to other code systems.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      16. Consent.category:VSCat.coding.system
      Definition

      The identification of the code system that defines the meaning of the symbol in the code.

      ShortIdentity of the terminology system
      Comments

      The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

      Control10..1
      Typeuri
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      Need to be unambiguous about the source of the definition of the symbol.

      Fixed Valuehttp://terminology.hl7.org/CodeSystem/v3-ActCode
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      18. Consent.category:VSCat.coding.code
      Definition

      A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

      Shortinformation disclosureSymbol in syntax defined by the system
      Control10..1
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      Need to refer to a particular code in the system.

      Fixed ValueIDSCL
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      20. Consent.patient
      Definition

      The patient/healthcare consumer to whom this consent applies.

      ShortThe patient to whom this EPR consent appliesWho the consent applies to
      Comments

      Commonly, the patient the consent pertains to is the author, but for young and old people, it may be some other person.

      Control10..1
      TypeReference(CH Core Patient, Patient)
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      22. Consent.performer
      Definition

      Either the Grantor, which is the entity responsible for granting the rights listed in a Consent Directive or the Grantee, which is the entity responsible for complying with the Consent Directive, including any obligations or limitations on authorizations and enforcement of prohibitions.

      ShortWho is agreeing to the policy and rules
      Comments

      Commonly, the patient the consent pertains to is the consentor, but particularly for young and old people, it may be some other person - e.g. a legal guardian.

      Control0..*
      TypeReference(CH Core Organization, CH Core Patient, CH Core Practitioner, RelatedPerson, CH Core PractitionerRole, Organization, Patient, Practitioner, PractitionerRole)
      Is Modifierfalse
      Summarytrue
      Alternate Namesconsentor
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      24. Consent.organization
      Definition

      The organization that manages the consent, and the framework within which it is executed.

      ShortCustodian of the consent
      Control0..*
      TypeReference(CH Core Organization, Organization)
      Is Modifierfalse
      Summarytrue
      Alternate Namescustodian
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      26. Consent.policyRule
      Definition

      A reference to the specific base computable regulation or policy.

      ShortRegulation that this consents to
      Comments

      If the policyRule is absent, computable consent would need to be constructed from the elements of the Consent resource.

      Control0..1
      This element is affected by the following invariants: ppc-1
      BindingUnless not suitable, these codes SHALL be taken from ConsentPolicyRuleCodeshttp://hl7.org/fhir/ValueSet/consent-policy
      (extensible to http://hl7.org/fhir/ValueSet/consent-policy)

      Regulatory policy examples.

      TypeCodeableConcept
      Is Modifierfalse
      Summarytrue
      Requirements

      Might be a unique identifier of a policy set in XACML, or other rules engine.

      Pattern Value{
        "coding" : [{
          "system" : "http://terminology.hl7.org/CodeSystem/consentpolicycodes",
          "code" : "ch-epr"
        }]
      }
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      28. Consent.provision
      Definition

      An exception to the base policy of this consent. An exception can be an addition or removal of access permissions.

      ShortExceptions to the EPR consentConstraints to the base Consent.policyRule
      Control0..1
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      30. Consent.provision.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      32. Consent.provision.type
      Definition

      Encounters can be added here where the consent for the EPR does not apply.


      Action to take - permit or deny - when the rule conditions are met. Not permitted in root rule, required in all nested rules.

      Shortdenydeny | permit
      Control10..1
      BindingThe codes SHALL be taken from ConsentProvisionTypehttp://hl7.org/fhir/ValueSet/consent-provision-type|4.0.1
      (required to http://hl7.org/fhir/ValueSet/consent-provision-type|4.0.1)

      How a rule statement is applied, such as adding additional consent or removing consent.

      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Fixed Valuedeny
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

      Guidance on how to interpret the contents of this table can be found here

      0. Consent
      Definition

      A record of a healthcare consumer’s choices, which permits or denies identified recipient(s) or recipient role(s) to perform one or more actions within a given policy context, for specific purposes and periods of time.

      ShortCH Core EPR-Consent
      Comments

      Broadly, there are 3 key areas of consent for patients: Consent around sharing information (aka Privacy Consent Directive - Authorization to Collect, Use, or Disclose information), consent for specific treatment, or kinds of treatment, and general advance care directives.

      Control0..*
      Is Modifierfalse
      Summaryfalse
      Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
      dom-6: A resource should have narrative for robust management (text.`div`.exists())
      ppc-1: Either a Policy or PolicyRule (policy.exists() or policyRule.exists())
      ppc-2: IF Scope=privacy, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='patient-privacy').exists().not())
      ppc-3: IF Scope=research, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='research').exists().not())
      ppc-4: IF Scope=adr, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='adr').exists().not())
      ppc-5: IF Scope=treatment, there must be a patient (patient.exists() or scope.coding.where(system='something' and code='treatment').exists().not())
      2. Consent.id
      Definition

      The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

      ShortLogical id of this artifact
      Comments

      The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

      Control0..1
      Typeid
      Is Modifierfalse
      Summarytrue
      4. Consent.meta
      Definition

      The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

      ShortMetadata about the resource
      Control0..1
      TypeMeta
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      6. Consent.implicitRules
      Definition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

      ShortA set of rules under which this content was created
      Comments

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

      Control0..1
      Typeuri
      Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      8. Consent.language
      Definition

      The base language in which the resource is written.

      ShortLanguage of the resource content
      Comments

      Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

      Control0..1
      BindingThe codes SHOULD be taken from CommonLanguages
      (preferred to http://hl7.org/fhir/ValueSet/languages)

      A human language.

      Additional BindingsPurpose
      AllLanguagesMax Binding
      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      10. Consent.text
      Definition

      A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

      ShortText summary of the resource, for human interpretation
      Comments

      Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

      Control0..1
      TypeNarrative
      Is Modifierfalse
      Summaryfalse
      Alternate Namesnarrative, html, xhtml, display
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      12. Consent.contained
      Definition

      These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

      ShortContained, inline Resources
      Comments

      This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

      Control0..*
      TypeResource
      Is Modifierfalse
      Summaryfalse
      Alternate Namesinline resources, anonymous resources, contained resources
      14. Consent.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      16. Consent.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
      Summaryfalse
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      18. Consent.identifier
      Definition

      Unique identifier for this copy of the Consent Statement.

      ShortIdentifier for this record (external references)
      Comments

      This identifier identifies this copy of the consent. Where this identifier is also used elsewhere as the identifier for a consent record (e.g. a CDA consent document) then the consent details are expected to be the same.

      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..*
      TypeIdentifier
      Is Modifierfalse
      Summarytrue
      Example<br/><b>General</b>:{ "system" : "http://acme.org/identifier/local/eCMS", "value" : "Local eCMS identifier" }
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      20. Consent.status
      Definition

      Indicates the current state of this consent.

      Shortdraft | proposed | active | rejected | inactive | entered-in-error
      Comments

      This element is labeled as a modifier because the status contains the codes rejected and entered-in-error that mark the Consent as not currently valid.

      Control1..1
      BindingThe codes SHALL be taken from ConsentState
      (required to http://hl7.org/fhir/ValueSet/consent-state-codes|4.0.1)

      Indicates the state of the consent.

      Typecode
      Is Modifiertrue because This element is labelled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Requirements

      The Consent Directive that is pointed to might be in various lifecycle states, e.g., a revoked Consent Directive.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      22. Consent.scope
      Definition

      A selector of the type of consent being presented: ADR, Privacy, Treatment, Research. This list is now extensible.

      ShortWhich of the four areas this resource covers (extensible)
      Control1..1
      BindingUnless not suitable, these codes SHALL be taken from ConsentScopeCodes
      (extensible to http://hl7.org/fhir/ValueSet/consent-scope)

      The four anticipated uses for the Consent Resource.

      TypeCodeableConcept
      Is Modifiertrue because Allows changes to codes based on scope selection
      Summarytrue
      Pattern Value{
        "coding" : [{
          "system" : "http://terminology.hl7.org/CodeSystem/consentscope",
          "code" : "patient-privacy"
        }]
      }
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      24. Consent.category
      Definition

      A classification of the type of consents found in the statement. This element supports indexing and retrieval of consent statements.

      ShortClassification of the consent statement - for indexing/retrieval
      Control1..*
      BindingUnless not suitable, these codes SHALL be taken from ConsentCategoryCodes
      (extensible to http://hl7.org/fhir/ValueSet/consent-category)

      A classification of the type of consents found in a consent statement.

      TypeCodeableConcept
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on Consent.category. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ coding.code
      • value @ coding.system
      • 26. Consent.category:VSCat
        Slice NameVSCat
        Definition

        A classification of the type of consents found in the statement. This element supports indexing and retrieval of consent statements.

        ShortClassification of the consent statement - for indexing/retrieval
        Control1..1
        BindingUnless not suitable, these codes SHALL be taken from ConsentCategoryCodes
        (extensible to http://hl7.org/fhir/ValueSet/consent-category)

        A classification of the type of consents found in a consent statement.

        TypeCodeableConcept
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        28. Consent.category:VSCat.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        30. Consent.category:VSCat.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on Consent.category.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 32. Consent.category:VSCat.coding
          Definition

          A reference to a code defined by a terminology system.

          ShortCode defined by a terminology system
          Comments

          Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

          Control1..*
          TypeCoding
          Is Modifierfalse
          Summarytrue
          Requirements

          Allows for alternative encodings within a code system, and translations to other code systems.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          34. Consent.category:VSCat.coding.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          36. Consent.category:VSCat.coding.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on Consent.category.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 38. Consent.category:VSCat.coding.system
            Definition

            The identification of the code system that defines the meaning of the symbol in the code.

            ShortIdentity of the terminology system
            Comments

            The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

            Control1..1
            Typeuri
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            Need to be unambiguous about the source of the definition of the symbol.

            Fixed Valuehttp://terminology.hl7.org/CodeSystem/v3-ActCode
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            40. Consent.category:VSCat.coding.version
            Definition

            The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

            ShortVersion of the system - if relevant
            Comments

            Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

            NoteThis is a business version Id, not a resource version Id (see discussion)
            Control0..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            42. Consent.category:VSCat.coding.code
            Definition

            A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

            Shortinformation disclosure
            Control1..1
            Typecode
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            Need to refer to a particular code in the system.

            Fixed ValueIDSCL
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            44. Consent.category:VSCat.coding.display
            Definition

            A representation of the meaning of the code in the system, following the rules of the system.

            ShortRepresentation defined by the system
            Control0..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            46. Consent.category:VSCat.coding.userSelected
            Definition

            Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

            ShortIf this coding was chosen directly by the user
            Comments

            Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

            Control0..1
            Typeboolean
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            48. Consent.category:VSCat.text
            Definition

            A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

            ShortPlain text representation of the concept
            Comments

            Very often the text is the same as a displayName of one of the codings.

            Control0..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            50. Consent.patient
            Definition

            The patient/healthcare consumer to whom this consent applies.

            ShortThe patient to whom this EPR consent applies
            Comments

            Commonly, the patient the consent pertains to is the author, but for young and old people, it may be some other person.

            Control1..1
            TypeReference(CH Core Patient)
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            52. Consent.dateTime
            Definition

            When this Consent was issued / created / indexed.

            ShortWhen this Consent was created or indexed
            Comments

            This is not the time of the original consent, but the time that this statement was made or derived.

            Control0..1
            TypedateTime
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            54. Consent.performer
            Definition

            Either the Grantor, which is the entity responsible for granting the rights listed in a Consent Directive or the Grantee, which is the entity responsible for complying with the Consent Directive, including any obligations or limitations on authorizations and enforcement of prohibitions.

            ShortWho is agreeing to the policy and rules
            Comments

            Commonly, the patient the consent pertains to is the consentor, but particularly for young and old people, it may be some other person - e.g. a legal guardian.

            Control0..*
            TypeReference(CH Core Organization, CH Core Patient, CH Core Practitioner, RelatedPerson, CH Core PractitionerRole)
            Is Modifierfalse
            Summarytrue
            Alternate Namesconsentor
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            56. Consent.organization
            Definition

            The organization that manages the consent, and the framework within which it is executed.

            ShortCustodian of the consent
            Control0..*
            TypeReference(CH Core Organization)
            Is Modifierfalse
            Summarytrue
            Alternate Namescustodian
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            58. Consent.source[x]
            Definition

            The source on which this consent statement is based. The source might be a scanned original paper form, or a reference to a consent that links back to such a source, a reference to a document repository (e.g. XDS) that stores the original consent document.

            ShortSource from which this consent is taken
            Comments

            The source can be contained inline (Attachment), referenced directly (Consent), referenced in a consent repository (DocumentReference), or simply by an identifier (Identifier), e.g. a CDA document id.

            Control0..1
            TypeChoice of: Attachment, Reference(Consent, DocumentReference, Contract, QuestionnaireResponse)
            [x] NoteSee Choice of Data Types for further information about how to use [x]
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            60. Consent.policy
            Definition

            The references to the policies that are included in this consent scope. Policies may be organizational, but are often defined jurisdictionally, or in law.

            ShortPolicies covered by this consent
            Control0..*
            TypeBackboneElement
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            62. Consent.policy.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            64. Consent.policy.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            66. Consent.policy.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            68. Consent.policy.authority
            Definition

            Entity or Organization having regulatory jurisdiction or accountability for enforcing policies pertaining to Consent Directives.

            ShortEnforcement source for policy
            Control0..1
            This element is affected by the following invariants: ppc-1
            Typeuri
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            70. Consent.policy.uri
            Definition

            The references to the policies that are included in this consent scope. Policies may be organizational, but are often defined jurisdictionally, or in law.

            ShortSpecific policy covered by this consent
            Comments

            This element is for discoverability / documentation and does not modify or qualify the policy rules.

            Control0..1
            This element is affected by the following invariants: ppc-1
            Typeuri
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            72. Consent.policyRule
            Definition

            A reference to the specific base computable regulation or policy.

            ShortRegulation that this consents to
            Comments

            If the policyRule is absent, computable consent would need to be constructed from the elements of the Consent resource.

            Control0..1
            This element is affected by the following invariants: ppc-1
            BindingUnless not suitable, these codes SHALL be taken from ConsentPolicyRuleCodes
            (extensible to http://hl7.org/fhir/ValueSet/consent-policy)

            Regulatory policy examples.

            TypeCodeableConcept
            Is Modifierfalse
            Summarytrue
            Requirements

            Might be a unique identifier of a policy set in XACML, or other rules engine.

            Pattern Value{
              "coding" : [{
                "system" : "http://terminology.hl7.org/CodeSystem/consentpolicycodes",
                "code" : "ch-epr"
              }]
            }
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            74. Consent.verification
            Definition

            Whether a treatment instruction (e.g. artificial respiration yes or no) was verified with the patient, his/her family or another authorized person.

            ShortConsent Verified by patient or family
            Control0..*
            TypeBackboneElement
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            76. Consent.verification.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            78. Consent.verification.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            80. Consent.verification.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            82. Consent.verification.verified
            Definition

            Has the instruction been verified.

            ShortHas been verified
            Control1..1
            Typeboolean
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            84. Consent.verification.verifiedWith
            Definition

            Who verified the instruction (Patient, Relative or other Authorized Person).

            ShortPerson who verified
            Control0..1
            TypeReference(Patient, RelatedPerson)
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            86. Consent.verification.verificationDate
            Definition

            Date verification was collected.

            ShortWhen consent verified
            Control0..1
            TypedateTime
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            88. Consent.provision
            Definition

            An exception to the base policy of this consent. An exception can be an addition or removal of access permissions.

            ShortExceptions to the EPR consent
            Control0..1
            TypeBackboneElement
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            90. Consent.provision.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            92. Consent.provision.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            94. Consent.provision.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            96. Consent.provision.type
            Definition

            Encounters can be added here where the consent for the EPR does not apply.

            Shortdeny
            Control1..1
            BindingThe codes SHALL be taken from ConsentProvisionType
            (required to http://hl7.org/fhir/ValueSet/consent-provision-type|4.0.1)

            How a rule statement is applied, such as adding additional consent or removing consent.

            Typecode
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Fixed Valuedeny
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            98. Consent.provision.period
            Definition

            The timeframe in this rule is valid.

            ShortTimeframe for this rule
            Control0..1
            TypePeriod
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            100. Consent.provision.actor
            Definition

            Who or what is controlled by this rule. Use group to identify a set of actors by some property they share (e.g. 'admitting officers').

            ShortWho|what controlled by this rule (or group, by role)
            Control0..*
            TypeBackboneElement
            Is Modifierfalse
            Summaryfalse
            Meaning if MissingThere is no specific actor associated with the exception
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            102. Consent.provision.actor.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            104. Consent.provision.actor.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            106. Consent.provision.actor.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            108. Consent.provision.actor.role
            Definition

            How the individual is involved in the resources content that is described in the exception.

            ShortHow the actor is involved
            Control1..1
            BindingUnless not suitable, these codes SHALL be taken from SecurityRoleType
            (extensible to http://hl7.org/fhir/ValueSet/security-role-type)

            How an actor is involved in the consent considerations.

            TypeCodeableConcept
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            110. Consent.provision.actor.reference
            Definition

            The resource that identifies the actor. To identify actors by type, use group to identify a set of actors by some property they share (e.g. 'admitting officers').

            ShortResource for the actor (or group, by role)
            Control1..1
            TypeReference(Device, Group, CareTeam, Organization, Patient, Practitioner, RelatedPerson, PractitionerRole)
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            112. Consent.provision.action
            Definition

            Actions controlled by this Rule.

            ShortActions controlled by this rule
            Comments

            Note that this is the direct action (not the grounds for the action covered in the purpose element). At present, the only action in the understood and tested scope of this resource is 'read'.

            Control0..*
            BindingFor example codes, see ConsentActionCodes
            (example to http://hl7.org/fhir/ValueSet/consent-action)

            Detailed codes for the consent action.

            TypeCodeableConcept
            Is Modifierfalse
            Summarytrue
            Meaning if Missingall actions
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            114. Consent.provision.securityLabel
            Definition

            A security label, comprised of 0..* security label fields (Privacy tags), which define which resources are controlled by this exception.

            ShortSecurity Labels that define affected resources
            Comments

            If the consent specifies a security label of "R" then it applies to all resources that are labeled "R" or lower. E.g. for Confidentiality, it's a high water mark. For other kinds of security labels, subsumption logic applies. When the purpose of use tag is on the data, access request purpose of use shall not conflict.

            Control0..*
            BindingUnless not suitable, these codes SHALL be taken from All Security Labels
            (extensible to http://hl7.org/fhir/ValueSet/security-labels)

            Security Labels from the Healthcare Privacy and Security Classification System.

            TypeCoding
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            116. Consent.provision.purpose
            Definition

            The context of the activities a user is taking - why the user is accessing the data - that are controlled by this rule.

            ShortContext of activities covered by this rule
            Comments

            When the purpose of use tag is on the data, access request purpose of use shall not conflict.

            Control0..*
            BindingUnless not suitable, these codes SHALL be taken from PurposeOfUse
            (extensible to http://terminology.hl7.org/ValueSet/v3-PurposeOfUse)

            What purposes of use are controlled by this exception. If more than one label is specified, operations must have all the specified labels.

            TypeCoding
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            118. Consent.provision.class
            Definition

            The class of information covered by this rule. The type can be a FHIR resource type, a profile on a type, or a CDA document, or some other type that indicates what sort of information the consent relates to.

            Shorte.g. Resource Type, Profile, CDA, etc.
            Comments

            Multiple types are or'ed together. The intention of the contentType element is that the codes refer to profiles or document types defined in a standard or an implementation guide somewhere.

            Control0..*
            BindingUnless not suitable, these codes SHALL be taken from ConsentContentClass
            (extensible to http://hl7.org/fhir/ValueSet/consent-content-class)

            The class (type) of information a consent rule covers.

            TypeCoding
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            120. Consent.provision.code
            Definition

            If this code is found in an instance, then the rule applies.

            Shorte.g. LOINC or SNOMED CT code, etc. in the content
            Comments

            Typical use of this is a Document code with class = CDA.

            Control0..*
            BindingFor example codes, see ConsentContentCodes
            (example to http://hl7.org/fhir/ValueSet/consent-content-code)

            If this code is found in an instance, then the exception applies.

            TypeCodeableConcept
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            122. Consent.provision.dataPeriod
            Definition

            Clinical or Operational Relevant period of time that bounds the data controlled by this rule.

            ShortTimeframe for data controlled by this rule
            Comments

            This has a different sense to the Consent.period - that is when the consent agreement holds. This is the time period of the data that is controlled by the agreement.

            Control0..1
            TypePeriod
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            124. Consent.provision.data
            Definition

            The resources controlled by this rule if specific resources are referenced.

            ShortData controlled by this rule
            Control0..*
            TypeBackboneElement
            Is Modifierfalse
            Summarytrue
            Meaning if Missingall data
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            126. Consent.provision.data.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            128. Consent.provision.data.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            130. Consent.provision.data.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            132. Consent.provision.data.meaning
            Definition

            How the resource reference is interpreted when testing consent restrictions.

            Shortinstance | related | dependents | authoredby
            Control1..1
            BindingThe codes SHALL be taken from ConsentDataMeaning
            (required to http://hl7.org/fhir/ValueSet/consent-data-meaning|4.0.1)

            How a resource reference is interpreted when testing consent restrictions.

            Typecode
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Fixed Valueinstance
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            134. Consent.provision.data.reference
            Definition

            A reference to the encounter where the consent for the EPR does not apply.

            ShortExcluded encounter for EPR
            Control1..1
            TypeReference(CH Core Encounter)
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            136. Consent.provision.provision
            Definition

            Rules which provide exceptions to the base rule or subrules.

            ShortNested Exception Rules
            Control0..*
            TypeSee ttp://hl7.org/fhir/StructureDefinition/Consent#Consent.provision
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))