CH Core (R4)
5.0.0-ballot - ballot Switzerland flag

This page is part of the CH Core (R4) (v5.0.0-ballot: STU 5 Ballot 1) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions

Data Type Profile: CHCoreContactPointECH46Internet - Detailed Descriptions

Active as of 2024-05-16

Definitions for the ch-core-contactpoint-ech-46-internet data type profile.

Guidance on how to interpret the contents of this table can be found here

0. ContactPoint
ShortCH Core ContactPoint eCH-0046 Internet
2. ContactPoint.system
Control1..?
Fixed Valueurl
4. ContactPoint.value
Control1..?
6. ContactPoint.use
8. ContactPoint.use.extension
SlicingThis element introduces a set of slices on ContactPoint.use.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 10. ContactPoint.use.extension:internetCategory
    Slice NameinternetCategory
    Control0..1
    TypeExtension(eCH-0046 Internet Category) (Extension Type: CodeableConcept)
    12. ContactPoint.period
    14. ContactPoint.period.start
    16. ContactPoint.period.end

    Guidance on how to interpret the contents of this table can be found here

    0. ContactPoint
    Definition

    Details for all kinds of technology mediated contact points for a person or organization, including telephone, email, etc.

    ShortCH Core ContactPoint eCH-0046 InternetDetails of a Technology mediated contact point (phone, fax, email, etc.)
    Control0..*
    This element is affected by the following invariants: ele-1
    Is Modifierfalse
    Invariantscpt-2: A system is required if a value is provided. (value.empty() or system.exists())
    ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    cpt-2: A system is required if a value is provided. (value.empty() or system.exists())
    2. ContactPoint.system
    Definition

    Telecommunications form for contact point - what communications system is required to make use of the contact.

    Shortphone | fax | email | pager | url | sms | other
    Control10..1
    This element is affected by the following invariants: cpt-2
    BindingThe codes SHALL be taken from ContactPointSystemhttp://hl7.org/fhir/ValueSet/contact-point-system|4.0.1
    (required to http://hl7.org/fhir/ValueSet/contact-point-system|4.0.1)

    Telecommunications form for contact point.

    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Fixed Valueurl
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    4. ContactPoint.value
    Definition

    The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).

    ShortThe actual contact point details
    Comments

    Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.

    Control10..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    Need to support legacy numbers that are not in a tightly controlled format.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    6. ContactPoint.use
    Definition

    Identifies the purpose for the contact point.

    Shorthome | work | temp | old | mobile - purpose of this contact point
    Comments

    Applications can assume that a contact is current unless it explicitly says that it is temporary or old.

    Control0..1
    BindingThe codes SHALL be taken from ContactPointUsehttp://hl7.org/fhir/ValueSet/contact-point-use|4.0.1
    (required to http://hl7.org/fhir/ValueSet/contact-point-use|4.0.1)

    Use of contact point.

    Typecode
    Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    8. ContactPoint.use.extension
    Definition

    An Extension


    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortExtensionAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on ContactPoint.use.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 10. ContactPoint.use.extension:internetCategory
      Slice NameinternetCategory
      Definition

      Optional Extension Element - found in all resources.

      ShortOptional Extensions Element
      Control0..1
      This element is affected by the following invariants: ele-1
      TypeExtension(eCH-0046 Internet Category) (Extension Type: CodeableConcept)
      Is Modifierfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      12. ContactPoint.period
      Definition

      Time period when the contact point was/is in use.

      ShortTime period when the contact point was/is in use
      Control0..1
      TypePeriod
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      14. ContactPoint.period.start
      Definition

      The start of the period. The boundary is inclusive.

      ShortStarting time with inclusive boundary
      Comments

      If the low element is missing, the meaning is that the low boundary is not known.

      Control0..1
      This element is affected by the following invariants: per-1
      TypedateTime
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      16. ContactPoint.period.end
      Definition

      The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.

      ShortEnd time with inclusive boundary, if not ongoing
      Comments

      The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.

      Control0..1
      This element is affected by the following invariants: per-1
      TypedateTime
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Meaning if MissingIf the end of the period is missing, it means that the period is ongoing
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

      Guidance on how to interpret the contents of this table can be found here

      0. ContactPoint
      Definition

      Details for all kinds of technology mediated contact points for a person or organization, including telephone, email, etc.

      ShortCH Core ContactPoint eCH-0046 Internet
      Control0..*
      This element is affected by the following invariants: ele-1
      Is Modifierfalse
      Invariantscpt-2: A system is required if a value is provided. (value.empty() or system.exists())
      ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      2. ContactPoint.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      4. ContactPoint.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on ContactPoint.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 6. ContactPoint.system
        Definition

        Telecommunications form for contact point - what communications system is required to make use of the contact.

        Shortphone | fax | email | pager | url | sms | other
        Control1..1
        This element is affected by the following invariants: cpt-2
        BindingThe codes SHALL be taken from ContactPointSystem
        (required to http://hl7.org/fhir/ValueSet/contact-point-system|4.0.1)

        Telecommunications form for contact point.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Fixed Valueurl
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        8. ContactPoint.value
        Definition

        The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).

        ShortThe actual contact point details
        Comments

        Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.

        Control1..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Need to support legacy numbers that are not in a tightly controlled format.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        10. ContactPoint.use
        Definition

        Identifies the purpose for the contact point.

        Shorthome | work | temp | old | mobile - purpose of this contact point
        Comments

        Applications can assume that a contact is current unless it explicitly says that it is temporary or old.

        Control0..1
        BindingThe codes SHALL be taken from ContactPointUse
        (required to http://hl7.org/fhir/ValueSet/contact-point-use|4.0.1)

        Use of contact point.

        Typecode
        Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old contact etc.for a current/permanent one
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        12. ContactPoint.use.id
        Definition

        unique id for the element within a resource (for internal references)

        Shortxml:id (or equivalent in JSON)
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        14. ContactPoint.use.extension
        Definition

        An Extension

        ShortExtension
        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on ContactPoint.use.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 16. ContactPoint.use.extension:internetCategory
          Slice NameinternetCategory
          Definition

          Optional Extension Element - found in all resources.

          ShortOptional Extensions Element
          Control0..1
          This element is affected by the following invariants: ele-1
          TypeExtension(eCH-0046 Internet Category) (Extension Type: CodeableConcept)
          Is Modifierfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          18. ContactPoint.use.value
          Definition

          Primitive value for code

          ShortPrimitive value for code
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          20. ContactPoint.rank
          Definition

          Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values.

          ShortSpecify preferred order of use (1 = highest)
          Comments

          Note that rank does not necessarily follow the order in which the contacts are represented in the instance.

          Control0..1
          TypepositiveInt
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          22. ContactPoint.period
          Definition

          Time period when the contact point was/is in use.

          ShortTime period when the contact point was/is in use
          Control0..1
          TypePeriod
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          24. ContactPoint.period.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          26. ContactPoint.period.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on ContactPoint.period.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 28. ContactPoint.period.start
            Definition

            The start of the period. The boundary is inclusive.

            ShortStarting time with inclusive boundary
            Comments

            If the low element is missing, the meaning is that the low boundary is not known.

            Control0..1
            This element is affected by the following invariants: per-1
            TypedateTime
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            30. ContactPoint.period.end
            Definition

            The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.

            ShortEnd time with inclusive boundary, if not ongoing
            Comments

            The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.

            Control0..1
            This element is affected by the following invariants: per-1
            TypedateTime
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Meaning if MissingIf the end of the period is missing, it means that the period is ongoing
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))