CH Core (R4)
2.1.0 - STU 3 Ballot
This page is part of the CH Core (R4) (v2.1.0: STU 3) based on FHIR R4. . For a full list of available versions, see the Directory of published versions
Active as of 2019-05-20 |
Definitions for the ch-core-coverage resource profile.
1. Coverage | |||||
Definition | This is basic constraint on Coverage for use in CH Core resources. | ||||
Control | 0..* | ||||
Comments | The Coverage resource contains the insurance card level information, which is customary to provide on claims and other communications between providers and insurers. | ||||
Invariants | Defined on this element dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (: contained.contained.empty()) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (: contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()) dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (: contained.meta.security.empty()) dom-6: A resource should have narrative for robust management (: text.`div`.exists()) | ||||
2. Coverage.id | |||||
Definition | The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. | ||||
Control | 0..1 | ||||
Type | string | ||||
Comments | The only time that a resource does not have an id is when it is being submitted to the server using a create operation. | ||||
3. Coverage.meta | |||||
Definition | The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. | ||||
Control | 0..1 | ||||
Type | Meta | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
4. Coverage.implicitRules | |||||
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. | ||||
Control | 0..1 | ||||
Type | uri | ||||
Is Modifier | true | ||||
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
5. Coverage.language | |||||
Definition | The base language in which the resource is written. | ||||
Control | 0..1 | ||||
Binding | The codes SHOULD be taken from CommonLanguages
A human language.
| ||||
Type | code | ||||
Comments | Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
6. Coverage.text | |||||
Definition | A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. | ||||
Control | 0..1 | ||||
Type | Narrative | ||||
Alternate Names | narrative, html, xhtml, display | ||||
Comments | Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
7. Coverage.contained | |||||
Definition | These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. | ||||
Control | 0..* | ||||
Type | Resource | ||||
Alternate Names | inline resources, anonymous resources, contained resources | ||||
Comments | This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. | ||||
8. Coverage.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Alternate Names | extensions, user content | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
9. Coverage.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
10. Coverage.identifier | |||||
Definition | A unique identifier assigned to this coverage. | ||||
Note | This is a business identifier, not a resource identifier (see discussion) | ||||
Control | 0..* | ||||
Type | Identifier | ||||
Requirements | Allows coverages to be distinguished and referenced. | ||||
Comments | The main (and possibly only) identifier for the coverage - often referred to as a Member Id, Certificate number, Personal Health Number or Case ID. May be constructed as the concatenation of the Coverage.SubscriberID and the Coverage.dependant. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
Slicing | This element introduces a set of slices on Coverage.identifier. The slices are unordered and Open, and can be differentiated using the following discriminators:
| ||||
11. Coverage.identifier:insurancecardnumber | |||||
SliceName | insurancecardnumber | ||||
Definition | Cardnumber Swiss insurance card v1 | ||||
Note | This is a business identifier, not a resource identifier (see discussion) | ||||
Control | 0..* | ||||
Type | Identifier | ||||
Requirements | Allows coverages to be distinguished and referenced. | ||||
Comments | The main (and possibly only) identifier for the coverage - often referred to as a Member Id, Certificate number, Personal Health Number or Case ID. May be constructed as the concatenation of the Coverage.SubscriberID and the Coverage.dependant. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
12. Coverage.identifier:insurancecardnumber.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Control | 0..1 | ||||
Type | string | ||||
13. Coverage.identifier:insurancecardnumber.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Alternate Names | extensions, user content | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
Slicing | This element introduces a set of slices on Coverage.identifier.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
| ||||
14. Coverage.identifier:insurancecardnumber.use | |||||
Definition | The purpose of this identifier. | ||||
Control | 0..1 | ||||
Binding | The codes SHALL be taken from IdentifierUse Identifies the purpose for this identifier, if known . | ||||
Type | code | ||||
Is Modifier | true | ||||
Requirements | Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. | ||||
Comments | Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
15. Coverage.identifier:insurancecardnumber.type | |||||
Definition | A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. | ||||
Control | 0..1 | ||||
Binding | The codes SHALL be taken from Identifier Type Codes; other codes may be used where these codes are not suitable A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. | ||||
Type | CodeableConcept | ||||
Requirements | Allows users to make use of identifiers when the identifier system is not known. | ||||
Comments | This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
16. Coverage.identifier:insurancecardnumber.system | |||||
Definition | oid of insurance card number | ||||
Control | 1..1 | ||||
Type | uri | ||||
Requirements | There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. | ||||
Comments | Identifier.system is always case sensitive. | ||||
Fixed Value | urn:oid:2.16.756.5.30.1.123.100.1.1.1 | ||||
Example | General:http://www.acme.com/identifiers/patient | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
17. Coverage.identifier:insurancecardnumber.value | |||||
Definition | Insurance card number of the patient (20 digits) | ||||
Control | 1..1 | ||||
Type | string | ||||
Comments | If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. | ||||
Example | General:123456 | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
18. Coverage.identifier:insurancecardnumber.period | |||||
Definition | Time period during which identifier is/was valid for use. | ||||
Control | 0..1 | ||||
Type | Period | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
19. Coverage.identifier:insurancecardnumber.assigner | |||||
Definition | Organization that issued/manages the identifier. | ||||
Control | 0..1 | ||||
Type | Reference(Organization) | ||||
Comments | The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
20. Coverage.status | |||||
Definition | The status of the resource instance. | ||||
Control | 1..1 | ||||
Binding | The codes SHALL be taken from FinancialResourceStatusCodes A code specifying the state of the resource instance. | ||||
Type | code | ||||
Is Modifier | true | ||||
Requirements | Need to track the status of the resource as 'draft' resources may undergo further edits while 'active' resources are immutable and may only have their status changed to 'cancelled'. | ||||
Comments | This element is labeled as a modifier because the status contains the code entered-in-error that marks the coverage as not currently valid. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
21. Coverage.type | |||||
Definition | The type of coverage: social program, medical plan, accident coverage (workers compensation, auto), group health or payment by an individual or organization. | ||||
Control | 0..1 | ||||
Binding | The codes SHOULD be taken from CoverageTypeAndSelf-PayCodes The type of insurance: public health, worker compensation; private accident, auto, private health, etc.) or a direct payment by an individual or organization. | ||||
Type | CodeableConcept | ||||
Requirements | The order of application of coverages is dependent on the types of coverage. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
22. Coverage.policyHolder | |||||
Definition | The party who 'owns' the insurance policy. | ||||
Control | 0..1 | ||||
Type | Reference(CHCorePatient | RelatedPerson | CHCoreOrganization) | ||||
Requirements | This provides employer information in the case of Worker's Compensation and other policies. | ||||
Comments | For example: may be an individual, corporation or the subscriber's employer. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
23. Coverage.subscriber | |||||
Definition | The party who has signed-up for or 'owns' the contractual relationship to the policy or to whom the benefit of the policy for services rendered to them or their family is due. | ||||
Control | 0..1 | ||||
Type | Reference(CHCorePatient | RelatedPerson) | ||||
Requirements | This is the party who is entitled to the benfits under the policy. | ||||
Comments | May be self or a parent in the case of dependants. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
24. Coverage.subscriberId | |||||
Definition | The insurer assigned ID for the Subscriber. | ||||
Control | 0..1 | ||||
Type | string | ||||
Requirements | The insurer requires this identifier on correspondance and claims (digital and otherwise). | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
25. Coverage.beneficiary | |||||
Definition | The party who benefits from the insurance coverage; the patient when products and/or services are provided. | ||||
Control | 1..1 | ||||
Type | Reference(CHCorePatient) | ||||
Requirements | This is the party who receives treatment for which the costs are reimbursed under the coverage. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
26. Coverage.dependent | |||||
Definition | A unique identifier for a dependent under the coverage. | ||||
Control | 0..1 | ||||
Type | string | ||||
Requirements | For some coverages a single identifier is issued to the Subscriber and then a unique dependent number is issued to each beneficiary. | ||||
Comments | Periodically the member number is constructed from the subscriberId and the dependant number. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
27. Coverage.relationship | |||||
Definition | The relationship of beneficiary (patient) to the subscriber. | ||||
Control | 0..1 | ||||
Binding | The codes SHALL be taken from SubscriberRelationshipCodes; other codes may be used where these codes are not suitable The relationship between the Subscriber and the Beneficiary (insured/covered party/patient). | ||||
Type | CodeableConcept | ||||
Requirements | To determine relationship between the patient and the subscriber to determine coordination of benefits. | ||||
Comments | Typically, an individual uses policies which are theirs (relationship='self') before policies owned by others. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
28. Coverage.period | |||||
Definition | Time period during which the coverage is in force. A missing start date indicates the start date isn't known, a missing end date means the coverage is continuing to be in force. | ||||
Control | 0..1 | ||||
Type | Period | ||||
Requirements | Some insurers require the submission of the coverage term. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
29. Coverage.payor | |||||
Definition | The program or plan underwriter or payor including both insurance and non-insurance agreements, such as patient-pay agreements. | ||||
Control | 1..* | ||||
Type | Reference(CHCoreOrganization | CHCorePatient | RelatedPerson) | ||||
Requirements | Need to identify the issuer to target for claim processing and for coordination of benefit processing. | ||||
Comments | May provide multiple identifiers such as insurance company identifier or business identifier (BIN number). For selfpay it may provide multiple paying persons and/or organizations. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
30. Coverage.class | |||||
Definition | A suite of underwriter specific classifiers. | ||||
Control | 0..* | ||||
Type | BackboneElement | ||||
Requirements | The codes provided on the health card which identify or confirm the specific policy for the insurer. | ||||
Comments | For example may be used to identify a class of coverage or employer group, Policy, Plan. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
31. Coverage.class.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Control | 0..1 | ||||
Type | string | ||||
32. Coverage.class.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Alternate Names | extensions, user content | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
33. Coverage.class.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
34. Coverage.class.type | |||||
Definition | The type of classification for which an insurer-specific class label or number and optional name is provided, for example may be used to identify a class of coverage or employer group, Policy, Plan. | ||||
Control | 1..1 | ||||
Binding | The codes SHALL be taken from CoverageClassCodes; other codes may be used where these codes are not suitable The policy classifications, eg. Group, Plan, Class, etc. | ||||
Type | CodeableConcept | ||||
Requirements | The insurer issued label for a specific health card value. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
35. Coverage.class.value | |||||
Definition | The alphanumeric string value associated with the insurer issued label. | ||||
Control | 1..1 | ||||
Type | string | ||||
Requirements | The insurer issued label and value are necessary to identify the specific policy. | ||||
Comments | For example, the Group or Plan number. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
36. Coverage.class.name | |||||
Definition | A short description for the class. | ||||
Control | 0..1 | ||||
Type | string | ||||
Requirements | Used to provide a meaningful description in correspondence to the patient. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
37. Coverage.order | |||||
Definition | The order of applicability of this coverage relative to other coverages which are currently in force. Note, there may be gaps in the numbering and this does not imply primary, secondary etc. as the specific positioning of coverages depends upon the episode of care. | ||||
Control | 0..1 | ||||
Type | positiveInt | ||||
Requirements | Used in managing the coordination of benefits. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
38. Coverage.network | |||||
Definition | The insurer-specific identifier for the insurer-defined network of providers to which the beneficiary may seek treatment which will be covered at the 'in-network' rate, otherwise 'out of network' terms and conditions apply. | ||||
Control | 0..1 | ||||
Type | string | ||||
Requirements | Used in referral for treatment and in claims processing. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
39. Coverage.costToBeneficiary | |||||
Definition | A suite of codes indicating the cost category and associated amount which have been detailed in the policy and may have been included on the health card. | ||||
Control | 0..* | ||||
Type | BackboneElement | ||||
Requirements | Required by providers to manage financial transaction with the patient. | ||||
Alternate Names | CoPay, Deductible, Exceptions | ||||
Comments | For example by knowing the patient visit co-pay, the provider can collect the amount prior to undertaking treatment. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
40. Coverage.costToBeneficiary.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Control | 0..1 | ||||
Type | string | ||||
41. Coverage.costToBeneficiary.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Alternate Names | extensions, user content | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
42. Coverage.costToBeneficiary.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
43. Coverage.costToBeneficiary.type | |||||
Definition | The category of patient centric costs associated with treatment. | ||||
Control | 0..1 | ||||
Binding | The codes SHALL be taken from CoverageCopayTypeCodes; other codes may be used where these codes are not suitable The types of services to which patient copayments are specified. | ||||
Type | CodeableConcept | ||||
Requirements | Needed to identify the category associated with the amount for the patient. | ||||
Comments | For example visit, specialist visits, emergency, inpatient care, etc. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
44. Coverage.costToBeneficiary.value[x] | |||||
Definition | The amount due from the patient for the cost category. | ||||
Control | 1..1 | ||||
Type | Choice of: Quantity(SimpleQuantity), Money | ||||
[x] Note | See Choice of Data Types for further information about how to use [x] | ||||
Requirements | Needed to identify the amount for the patient associated with the category. | ||||
Comments | Amount may be expressed as a percentage of the service/product cost or a fixed amount of currency. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
45. Coverage.costToBeneficiary.exception | |||||
Definition | A suite of codes indicating exceptions or reductions to patient costs and their effective periods. | ||||
Control | 0..* | ||||
Type | BackboneElement | ||||
Requirements | Required by providers to manage financial transaction with the patient. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
46. Coverage.costToBeneficiary.exception.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Control | 0..1 | ||||
Type | string | ||||
47. Coverage.costToBeneficiary.exception.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Alternate Names | extensions, user content | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
48. Coverage.costToBeneficiary.exception.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
49. Coverage.costToBeneficiary.exception.type | |||||
Definition | The code for the specific exception. | ||||
Control | 1..1 | ||||
Binding | For example codes, see ExampleCoverageFinancialExceptionCodes The types of exceptions from the part or full value of financial obligations such as copays. | ||||
Type | CodeableConcept | ||||
Requirements | Needed to identify the exception associated with the amount for the patient. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
50. Coverage.costToBeneficiary.exception.period | |||||
Definition | The timeframe during when the exception is in force. | ||||
Control | 0..1 | ||||
Type | Period | ||||
Requirements | Needed to identify the applicable timeframe for the exception for the correct calculation of patient costs. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
51. Coverage.subrogation | |||||
Definition | When 'subrogation=true' this insurance instance has been included not for adjudication but to provide insurers with the details to recover costs. | ||||
Control | 0..1 | ||||
Type | boolean | ||||
Requirements | See definition for when to be used. | ||||
Comments | Typically, automotive and worker's compensation policies would be flagged with 'subrogation=true' to enable healthcare payors to collect against accident claims. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
52. Coverage.contract | |||||
Definition | The policy(s) which constitute this insurance coverage. | ||||
Control | 0..* | ||||
Type | Reference(Contract) | ||||
Requirements | To reference the legally binding contract between the policy holder and the insurer. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |